Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Texas A&M researcher makes breakthrough discovery in stretchable electronics materials

31.05.2019

Stretchable electronics are where engineering meets Hollywood special effects

With a wide range of healthcare, energy and military applications, stretchable electronics are revered for their ability to be compressed, twisted and conformed to uneven surfaces without losing functionality.


Sideways cracking in a silicone elastomer.

Credit: Dr. Matt Pharr/ Texas A&M University Engineering

By using the elasticity of polymers such as silicone, these emerging technologies are made to move in ways that mimic skin.

This sheds light on why Smooth-On Ecoflex, a substance most commercially used to create molds and movie masks and prosthetics, is the most prominent silicone elastomer (a rubber-like substance) found in research.

While handling a sample of the material, Dr. Matt Pharr, assistant professor in the J. Mike Walker '66 Department of Mechanical Engineering at Texas A&M University, and graduate student Seunghyun Lee, recently discovered a new type of fracture.

"I have done some work in the area of stretchable electronics, so I have a lot of materials from when I was a postdoc. We had to store samples in our office and, likewise, I had some here because we were going to use them in a project that we ended up not doing. I'm a nervous fidgeter and while I was playing with it, I noticed something weird," said Pharr.

This oddity is what Pharr and Lee refer to in their recent publication "Sideways and Stable Crack Propagation in a Silicone Elastomer" as sideways cracking. This phenomenon is when a fracture branches from a crack tip and extends perpendicular to the original tear.

Their findings not only provide a fresh, new perspective on the formation of factures and how to increase stretchability in elastomers, but also lay the foundation for more tear- and fracture-resistant materials.

"Initially this material is isotopic, meaning it has the same properties in all directions. But once you start to stretch it, you cause some microstructural changes in the material that makes it anisotropic -- different properties in all different directions," said Pharr. "Usually, when people think about fracture of a given material, they're not thinking about fracture resistance being different based on direction."

This conceptualization, however, is critical to innovation and advancement in stretchable electronics.

As Pharr explained, upon loading, polymers with incisions tend to be ripped apart from one end to another. However, materials that exhibit sideways cracking stop the fracture from deepening. Instead, the incision simply expands alongside the rest of the elastomer and eventually, once stretched enough, looks like nothing more than a small dent in the surface of the material -- negating further threat from the original crack.

This allows the unharmed section of an elastomer to retain its load-bearing and functional properties, all while increasing stretchability.

Going forward, by investigating how to reverse engineer microstructures that lead to sideways cracking, researchers can harness the benefits associated with it and develop application methods to materials that do not normally exhibit such fractures. This would lead to better fracture resistance in the very thin layers of elastomers used in stretchable electronics, as well as greater stretchability -- both of which are key to the advancement and future usability of such technologies.

"To me, this is scientifically intriguing," said Pharr. "It's not expected. And seeing something that I don't expect always sparks curiosity. (The material) is literally sitting in a drawer in my desk and this was all inspired by playing around."

Media Contact

Amy Halbert
ahalbert@tamu.edu
979-458-4243

http://www.tamu.edu 

Amy Halbert | EurekAlert!
Further information:
https://today.tamu.edu/2019/05/29/lights-camera-fracture/

More articles from Materials Sciences:

nachricht Oriented hexagonal boron nitride foster new type of information carrier
25.05.2020 | Japan Advanced Institute of Science and Technology

nachricht A replaceable, more efficient filter for N95 masks
22.05.2020 | American Chemical Society

All articles from Materials Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Biotechnology: Triggered by light, a novel way to switch on an enzyme

In living cells, enzymes drive biochemical metabolic processes enabling reactions to take place efficiently. It is this very ability which allows them to be used as catalysts in biotechnology, for example to create chemical products such as pharmaceutics. Researchers now identified an enzyme that, when illuminated with blue light, becomes catalytically active and initiates a reaction that was previously unknown in enzymatics. The study was published in "Nature Communications".

Enzymes: they are the central drivers for biochemical metabolic processes in every living cell, enabling reactions to take place efficiently. It is this very...

Im Focus: New double-contrast technique picks up small tumors on MRI

Early detection of tumors is extremely important in treating cancer. A new technique developed by researchers at the University of California, Davis offers a significant advance in using magnetic resonance imaging to pick out even very small tumors from normal tissue. The work is published May 25 in the journal Nature Nanotechnology.

researchers at the University of California, Davis offers a significant advance in using magnetic resonance imaging to pick out even very small tumors from...

Im Focus: I-call - When microimplants communicate with each other / Innovation driver digitization - "Smart Health“

Microelectronics as a key technology enables numerous innovations in the field of intelligent medical technology. The Fraunhofer Institute for Biomedical Engineering IBMT coordinates the BMBF cooperative project "I-call" realizing the first electronic system for ultrasound-based, safe and interference-resistant data transmission between implants in the human body.

When microelectronic systems are used for medical applications, they have to meet high requirements in terms of biocompatibility, reliability, energy...

Im Focus: When predictions of theoretical chemists become reality

Thomas Heine, Professor of Theoretical Chemistry at TU Dresden, together with his team, first predicted a topological 2D polymer in 2019. Only one year later, an international team led by Italian researchers was able to synthesize these materials and experimentally prove their topological properties. For the renowned journal Nature Materials, this was the occasion to invite Thomas Heine to a News and Views article, which was published this week. Under the title "Making 2D Topological Polymers a reality" Prof. Heine describes how his theory became a reality.

Ultrathin materials are extremely interesting as building blocks for next generation nano electronic devices, as it is much easier to make circuits and other...

Im Focus: Rolling into the deep

Scientists took a leukocyte as the blueprint and developed a microrobot that has the size, shape and moving capabilities of a white blood cell. Simulating a blood vessel in a laboratory setting, they succeeded in magnetically navigating the ball-shaped microroller through this dynamic and dense environment. The drug-delivery vehicle withstood the simulated blood flow, pushing the developments in targeted drug delivery a step further: inside the body, there is no better access route to all tissues and organs than the circulatory system. A robot that could actually travel through this finely woven web would revolutionize the minimally-invasive treatment of illnesses.

A team of scientists from the Max Planck Institute for Intelligent Systems (MPI-IS) in Stuttgart invented a tiny microrobot that resembles a white blood cell...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

Dresden Nexus Conference 2020: Same Time, Virtual Format, Registration Opened

19.05.2020 | Event News

Aachen Machine Tool Colloquium AWK'21 will take place on June 10 and 11, 2021

07.04.2020 | Event News

International Coral Reef Symposium in Bremen Postponed by a Year

06.04.2020 | Event News

 
Latest News

German-British Research project for even more climate protection in the rail industry

28.05.2020 | Transportation and Logistics

A special elemental magic

28.05.2020 | Physics and Astronomy

Skoltech scientists get a sneak peek of a key process in battery 'life'

28.05.2020 | Power and Electrical Engineering

VideoLinks
Science & Research
Overview of more VideoLinks >>>