Researchers from the University of British Columbia and McMaster University have developed what could be the bone implant material of the future: an airy, foamlike substance that can be injected into the body and provide scaffolding for the growth of new bone.
It's made by treating nanocrystals derived from plant cellulose so that they link up and form a strong but lightweight sponge - technically speaking, an aerogel - that can compress or expand as needed to completely fill out a bone cavity.
Researchers treated nanocrystals derived from plant cellulose so that they can link up and form a strong but lightweight sponge (an aerogel) that can compress or expand as needed to completely fill out a bone cavity.
Credit: Clare Kiernan, UBC
"Most bone graft or implants are made of hard, brittle ceramic that doesn't always conform to the shape of the hole, and those gaps can lead to poor growth of the bone and implant failure," said study author Daniel Osorio, a PhD student in chemical engineering at McMaster. "We created this cellulose nanocrystal aerogel as a more effective alternative to these synthetic materials."
For their research, the team worked with two groups of rats, with the first group receiving the aerogel implants and the second group receiving none. Results showed that the group with implants saw 33 per cent more bone growth at the three-week mark and 50 per cent more bone growth at the 12-week mark, compared to the controls.
"These findings show, for the first time in a lab setting, that a cellulose nanocrystal aerogel can support new bone growth," said study co-author Emily Cranston, a professor of wood science and chemical and biological engineering who holds the President's Excellence Chair in Forest Bio-products at UBC. She added that the implant should break down into non-toxic components in the body as the bone starts to heal.
The innovation can potentially fill a niche in the $2-billion bone graft market in North America, said study co-author Kathryn Grandfield, a professor of materials science and engineering, and biomedical engineering at McMaster who supervised the work.
"We can see this aerogel being used for a number of applications including dental implants and spinal and joint replacement surgeries," said Grandfield. "And it will be economical because the raw material, the nanocellulose, is already being produced in commercial quantities."
The researchers say it will be some time before the aerogel makes it out of the lab and into the operating room.
"This summer, we will study the mechanisms between the bone and implant that lead to bone growth," said Grandfield. "We'll also look at how the implant degrades using advanced microscopes. After that, more biological testing will be required before it is ready for clinical trials."
"Cross-linked cellulose nanocrystal aerogels as viable bone tissue scaffolds" was published last week in Acta Biomaterialia.
Click here to download images: https:/
Lou Corpuz-Bosshart | EurekAlert!
Theoretical tubulanes inspire ultrahard polymers
14.11.2019 | Rice University
New spin directions in pyrite an encouraging sign for future spintronics
14.11.2019 | ARC Centre of Excellence in Future Low-Energy Electronics Technologies
An international team of scientists, including three researchers from New Jersey Institute of Technology (NJIT), has shed new light on one of the central mysteries of solar physics: how energy from the Sun is transferred to the star's upper atmosphere, heating it to 1 million degrees Fahrenheit and higher in some regions, temperatures that are vastly hotter than the Sun's surface.
With new images from NJIT's Big Bear Solar Observatory (BBSO), the researchers have revealed in groundbreaking, granular detail what appears to be a likely...
The Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM in Dresden has succeeded in using Selective Electron Beam Melting (SEBM) to...
Carbon nanotubes (CNTs) are valuable for a wide variety of applications. Made of graphene sheets rolled into tubes 10,000 times smaller than a human hair, CNTs have an exceptional strength-to-mass ratio and excellent thermal and electrical properties. These features make them ideal for a range of applications, including supercapacitors, interconnects, adhesives, particle trapping and structural color.
New research reveals even more potential for CNTs: as a coating, they can both repel and hold water in place, a useful property for applications like printing,...
If you've ever tried to put several really strong, small cube magnets right next to each other on a magnetic board, you'll know that you just can't do it. What happens is that the magnets always arrange themselves in a column sticking out vertically from the magnetic board. Moreover, it's almost impossible to join several rows of these magnets together to form a flat surface. That's because magnets are dipolar. Equal poles repel each other, with the north pole of one magnet always attaching itself to the south pole of another and vice versa. This explains why they form a column with all the magnets aligned the same way.
Now, scientists at ETH Zurich have managed to create magnetic building blocks in the shape of cubes that - for the first time ever - can be joined together to...
Quantum-based communication and computation technologies promise unprecedented applications, such as unconditionally secure communications, ultra-precise...
15.11.2019 | Event News
15.11.2019 | Event News
05.11.2019 | Event News
18.11.2019 | Earth Sciences
18.11.2019 | Life Sciences
18.11.2019 | Power and Electrical Engineering