Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Fraunhofer WKI develops sustainable sandwich elements made from wood foam and textile-reinforced

10.07.2019

In a joint project with the Technische Universität Braunschweig, researchers from the Fraunhofer WKI have developed an innovative building element for the construction industry: a sandwich element with a wood-foam core and a thin cover layer of textile-reinforced concrete. It can be used, for example, as a lightweight curtain-wall element or in interior fittings. The high-performance wood foam requires no artificial binding agents and can be produced from regionally available wood residues. Through the utilization of wood foam instead of conventional foam based on petrochemicals, the proportion of particularly sustainable construction materials in buildings can be increased.

Wood-fiber materials are already being frequently used in the construction industry. The products used until now, such as fiberboard or oriented strand board, usually contain petrochemical binders. In an earlier research project, the scientists at the Fraunhofer WKI had already developed a wood foam which does not require artificial binders.


Sandwich element made from wood foam with textile-reinforced concrete as cover layer.

Fraunhofer WKI | Manuela Lingnau

Now, in cooperation with the Institute of Joining and Welding Technology at the TU Braunschweig, they have closely examined the potential of wood foam for practical applications in the construction industry. Together, they have developed a sandwich element comprised of a wood-foam core with a thin layer of textile-reinforced concrete applied to both sides.

Sandwich elements, as a material combination with a relatively thick and rigid core and a cover layer which is as thin as possible, have many advantages.

They result in stiff and load-bearing components which are nevertheless lightweight. As sandwich elements also provide good thermal and acoustic insulation, they are already widely used in building construction.

In this project, the researchers at the Fraunhofer WKI set themselves the goal of making sandwich elements more sustainable by utilizing renewable raw materials and avoiding the use of binders. They succeeded.

“Through the utilization of our wood foam with a thin textile-reinforced concrete cover layer, the proportion of particularly sustainable construction materials in buildings can be increased,” summarizes Project Manager Dr. Frauke Bunzel.

The wood foam is comprised exclusively of wood fibers. The relatively pressure-stable structural fixing of the wood fibers is achieved through a special manufacturing process with the aid of the wood’s own bonding forces.

In addition to all tree species or annual plants containing lignocellulose, waste wood can also be used as a raw material source. “In this way, a versatile product is created which is not only sustainable but also just as efficient as comparable wood-fiber materials with petrochemical binders,” explains Dr. Bunzel.

In order to be used in construction, wood foam as a sandwich-core material must fulfill minimum requirements in terms of strength and thermal conductivity. The researchers have therefore produced and comprehensively examined different species of wood with differing, practicable densities in order to determine the best possible combinations. “We have also further developed the process technology for producing the wood foam. We have made particular progress in the type of foaming and efficient drying,” reports Dr. Bunzel.

Within the framework of the project, the researchers at the Institute of Joining and Welding Technology at the TU Braunschweig determined that differing techniques can be applied when joining the wood-foam core to the textile-reinforced concrete cover layers.

Construction adhesives from wood technology adhere well to the cured concrete surface layers and can therefore be used both indoors and outdoors, depending on the requirements. Alternatively, the possibility exists to pour the liquid-phase concrete directly onto the open-pored wood-foam core.

With this joining process, the sandwich elements are also suitable for indoor and outdoor use. Through direct pouring, adhesives become superfluous. This makes the sandwich elements easier to recycle at a later date.

“Through testing, we have shown that the sandwich elements which we produce result in components with sufficient load-bearing capacity and thermal and acoustic effectiveness,” concludes Dr. Bunzel.

The wood-foam core offers a sustainable alternative to the petrochemical-based core materials previously used in construction. The sandwich elements can be utilized in lightweight curtain-wall elements as well as for interior fittings.

The project was funded by the “Zukunft Bau” research initiative of the Federal Ministry for the Environment, Nature Conversation and Nuclear Safety.

Background
Sustainability through the utilization of renewable raw materials has formed the focus at the Fraunhofer WKI for more than 70 years. The institute, with locations in Braunschweig, Hanover and Wolfsburg, specializes in process engineering, natural-fiber composites, wood and emission protection, quality assurance of wood products, material and product testing, recycling procedures and the utilization of organic building materials and wood in construction. Virtually all the procedures and materials resulting from the research activities are applied industrially.

Originalpublikation:

https://www.wki.fraunhofer.de/en/press-media/2019/PI_2019-09_sustainable-sandwic...

Thomas Eck | Fraunhofer-Gesellschaft

More articles from Materials Sciences:

nachricht Fraunhofer LBF and BAM develop faster procedure for flame-retardant plastics
21.10.2019 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF

nachricht For EVs with higher range: Take greater advantage of the potential offered by lightweight construction materials
21.10.2019 | Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF

All articles from Materials Sciences >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Solving the mystery of quantum light in thin layers

A very special kind of light is emitted by tungsten diselenide layers. The reason for this has been unclear. Now an explanation has been found at TU Wien (Vienna)

It is an exotic phenomenon that nobody was able to explain for years: when energy is supplied to a thin layer of the material tungsten diselenide, it begins to...

Im Focus: An ultrafast glimpse of the photochemistry of the atmosphere

Researchers at Ludwig-Maximilians-Universitaet (LMU) in Munich have explored the initial consequences of the interaction of light with molecules on the surface of nanoscopic aerosols.

The nanocosmos is constantly in motion. All natural processes are ultimately determined by the interplay between radiation and matter. Light strikes particles...

Im Focus: Shaping nanoparticles for improved quantum information technology

Particles that are mere nanometers in size are at the forefront of scientific research today. They come in many different shapes: rods, spheres, cubes, vesicles, S-shaped worms and even donut-like rings. What makes them worthy of scientific study is that, being so tiny, they exhibit quantum mechanical properties not possible with larger objects.

Researchers at the Center for Nanoscale Materials (CNM), a U.S. Department of Energy (DOE) Office of Science User Facility located at DOE's Argonne National...

Im Focus: Novel Material for Shipbuilding

A new research project at the TH Mittelhessen focusses on the development of a novel light weight design concept for leisure boats and yachts. Professor Stephan Marzi from the THM Institute of Mechanics and Materials collaborates with Krake Catamarane, which is a shipyard located in Apolda, Thuringia.

The project is set up in an international cooperation with Professor Anders Biel from Karlstad University in Sweden and the Swedish company Lamera from...

Im Focus: Controlling superconducting regions within an exotic metal

Superconductivity has fascinated scientists for many years since it offers the potential to revolutionize current technologies. Materials only become superconductors - meaning that electrons can travel in them with no resistance - at very low temperatures. These days, this unique zero resistance superconductivity is commonly found in a number of technologies, such as magnetic resonance imaging (MRI).

Future technologies, however, will harness the total synchrony of electronic behavior in superconductors - a property called the phase. There is currently a...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

International Symposium on Functional Materials for Electrolysis, Fuel Cells and Metal-Air Batteries

02.10.2019 | Event News

NEXUS 2020: Relationships Between Architecture and Mathematics

02.10.2019 | Event News

Optical Technologies: International Symposium „Future Optics“ in Hannover

19.09.2019 | Event News

 
Latest News

Fraunhofer LBF and BAM develop faster procedure for flame-retardant plastics

21.10.2019 | Materials Sciences

For EVs with higher range: Take greater advantage of the potential offered by lightweight construction materials

21.10.2019 | Materials Sciences

Benefit and risk: Meta-analysis draws a heterogeneous picture of drug-coated balloon angioplasty

21.10.2019 | Medical Engineering

VideoLinks
Science & Research
Overview of more VideoLinks >>>