Bioasphalt Developed at Iowa State to be Used, Tested on Des Moines Bike Trail
That finding recently moved from Williams’ laboratory at the Institute for Transportation’s Asphalt Materials and Pavements Program at Iowa State to a demonstration project. The project paved part of a Des Moines bicycle trail with an asphalt mixture containing what is now known as Bioasphalt.
If the demonstration and other tests go well, “This would be great stuff for the state of Iowa,” said Williams, an associate professor of civil, construction and environmental engineering.
He said that’s for a lot of reasons: Asphalt mixtures derived from plants and trees could replace petroleum-based mixes. That could create a new market for Iowa crop residues. It could be a business opportunity for Iowans. And it saves energy and money because Bioasphalt can be mixed and paved at lower temperatures than conventional asphalt.
Bio-oil is created by a thermochemical process called fast pyrolysis. Corn stalks, wood wastes or other types of biomass are quickly heated without oxygen. The process produces a liquid bio-oil that can be used to manufacture fuels, chemicals and asphalt plus a solid product called biochar that can be used to enrich soils and remove greenhouses gases from the atmosphere.
Robert C. Brown – an Anson Marston Distinguished Professor of Engineering, the Gary and Donna Hoover Chair in Mechanical Engineering and the Iowa Farm Bureau director of Iowa State's Bioeconomy Institute – has led research and development of fast pyrolysis technologies at Iowa State. Three of his former graduate students – Jared Brown, Cody Ellens and Anthony Pollard, all December 2009 graduates – have established a startup company, Avello Bioenergy Inc., that specializes in pyrolysis technology that improves, collects and separates bio-oil into various liquid fractions.
Williams used bio-oil fractions provided by Brown’s fast pyrolysis facility at Iowa State’s BioCentury Research Farm to study and develop Bioasphalt. That research was supported by the Iowa Energy Center and the Iowa Department of Transportation.
Avello has licensed the Bioasphalt technology from the Iowa State University Research Foundation Inc. and has produced oak-based bio-oil fractions for the bike trail project using funding from the Iowa Department of Economic Development. Williams said the project will include a mix of 5 percent Bioasphalt.
Jeb Brewer, the city engineer for the City of Des Moines, said the Bioasphalt will be part of phase two of the Waveland Trail on the city’s northwest side. The 10-foot-wide trail will run along the west side of Glendale Cemetery from University Avenue to Franklin Avenue.
Brewer said the demonstration project is a good fit for the city.
“We have a fairly active program for finding ways to conserve energy and be more sustainable,” he said. “We’re interested in seeing how this works out and whether it can be part of our toolbox to create more sustainable projects.”
Contractors involved in the Bioasphalt demonstration project are Elder Corp. of Des Moines, Bituminous Materials and Supplies of Des Moines and Grimes Asphalt and Paving Corp. of Grimes with the Asphalt Paving Association of Iowa supporting the project.
Iowa State’s Williams said a successful demonstration would lead to more pavement tests containing higher and higher percentages of Bioasphalt.
“This demonstration project is a great opportunity,” he said. “We’re introducing a green technology into a green environment in Des Moines. And it’s a technology that’s been developed here in Iowa.”
Avello® and Bioasphalt® are registered trademarks of Avello Bioenergy, Inc.
Christopher Williams, Civil, Construction and Environmental Engineering and the Institute for Transportation's Asphalt Materials and Pavements Program, (515) 294-4419, rwilliam@iastate.edu
Jeb Brewer, City of Des Moines, (515) 283-4920, jebrewer@dmgov.org
Dennis Banasiak, Avello Bioenergy Inc., (443) 326-2755, denban@avellobioenergy.com
Bill Haman, Iowa Energy Center, (515) 294-8819, whaman@energy.iastate.edu
Scott Schram, Iowa Department of Transportation, (515) 239-1604, scott.schram@dot.iowa.gov
Josh Redhead, Elder Corp., (515) 266-3111, Josh@eldercorp.com
Bill Kubacki, Bituminous Materials and Supplies, (515) 288-1076, bill.kubacki@asphalt-materials.com
Mike Yonker, Grimes Asphalt and Paving Corporation, (515) 986-3532, mike@grimesasphalt.com
Jim Hibbs, Grimes Asphalt and Paving Corporation, (515) 201-9004, jhibbs@rasmussengroup.com
Bill Rosener, Asphalt Paving Association of Iowa, (515) 233-0015, billr@apai.net
Mike Krapfl, Iowa State University News Service, (515) 294-4917, mkrapfl@iastate.edu
Media Contact
More Information:
http://www.iastate.eduAll latest news from the category: Materials Sciences
Materials management deals with the research, development, manufacturing and processing of raw and industrial materials. Key aspects here are biological and medical issues, which play an increasingly important role in this field.
innovations-report offers in-depth articles related to the development and application of materials and the structure and properties of new materials.
Newest articles
Superradiant atoms could push the boundaries of how precisely time can be measured
Superradiant atoms can help us measure time more precisely than ever. In a new study, researchers from the University of Copenhagen present a new method for measuring the time interval,…
Ion thermoelectric conversion devices for near room temperature
The electrode sheet of the thermoelectric device consists of ionic hydrogel, which is sandwiched between the electrodes to form, and the Prussian blue on the electrode undergoes a redox reaction…
Zap Energy achieves 37-million-degree temperatures in a compact device
New publication reports record electron temperatures for a small-scale, sheared-flow-stabilized Z-pinch fusion device. In the nine decades since humans first produced fusion reactions, only a few fusion technologies have demonstrated…
