New fabrication process for microarray chips for clinical diagnostics

Fig. 1: Laser-based bench-top system protoprinter.<br>Fraunhofer Institute for Laser Technology ILT, Aachen.<br>

These arrays can be used in clinical diagnostics to identify tumor markers in blood samples, and they are also capable of detecting pathogens responsible for infectious diseases. Thanks to the new resource-saving production process, complex analyses can be carried out on even the tiniest amounts of biopsy material.

Microarray chips for use as a diagnostics tool are produced by depositing small amounts of biopsy material, taken for instance from a patient’s tumor cells, onto a substrate. It is often only possible to gather a tiny amount of the relevant cell material, and this limits the extent of testing that can be carried out. But if a patient is to receive targeted treatment, then comprehensive testing is essential. That is why it is important to optimize preparation of the biopsy specimens by ensuring they are used to make as many microarray chips as possible. Microarrays are usually produced using microdispensing systems, which function in a similar way to an ink-jet printer. The major drawback of these systems is that the printer head quickly becomes obstructed by many proteins, such as antibodies, that are crucial to the analysis. The process has to be halted and the printer head either cleaned or replaced – making it tremendously time-consuming and costly for users.

Printing without a printer head: reliable, precise and fast

As part of the ProtoPrint INNONET project, sponsored by the German Federal Ministry of Economics and Technology (BMWi), and in collaboration with GeSiM Gesellschaft für Silizium-Mikrosysteme mbH, Fraunhofer ILT has developed a laser-based bench-top system for the fabrication of protein microarray chips. Unlike conventional printer technology, this system is able to deliver microscopic amounts of all kinds of proteins directly onto the substrate material. With the aid of this so-called »protoprinter«, Dominik Riester and his team have succeeded in using proteins to produce a functioning test system for cell analysis.

This is how the printing process works: The microarray is situated beneath a glass slide which has the biopsy material on its underside along with an intermediate titanium absorber layer. A pulsed laser beam is focused on the absorber layer, evaporating the titanium, and the resulting forwards impulse transfers the biopsy material onto the microarray. This laser-based process has no need of a printer head and so it can transfer all the relevant proteins. The absence of a printer head also means there is none of the associated sample wastage caused, for example, by feeder lines. This dramatically reduces the amount of biopsy material required to carry out the analysis. What is more, the protoprinter can produce spot sizes of 10 µm to 300 µm – which means up to 500,000 protein spots can fit onto a surface the size of a thumbnail, allowing diagnosis to be performed with a minimum of material. Until now it has not been possible to deposit sample material onto a substrate with such precision and efficiency and in such small amounts. »The protoprinter is reliable and it saves both resources and time. That’s what makes it more cost-effective to use than a microdispensing system,« says Riester.

What you see is what you print

The design of the protoprinter is currently being refined to make it capable of producing artificial hematopoietic stem cell niches. In this, the Aachen-based researchers are focusing in particular on integrating an automated camera-assisted recognition process. Its job is to enable the targeted transfer of cells and other biomaterials – so providing optimal control of the printing process.

During the Fraunhofer press tour at Biotechnica, our experts will be presenting the protoprinter as well as other exhibits relating to the topic of BioRap artificial vessels. Those wishing to participate are invited to meet at 3.30 pm on October 11, 2011, at the joint Fraunhofer Booth D10 in Hall 9.

Contacts at Fraunhofer ILT
Our experts will be pleased to assist if you have any questions:
Dominik Riester
Biotechnology and Laser Therapy
Phone +49 241 8906-529
dominik.riester@ilt.fraunhofer.de
Dr. Martin Wehner
Biotechnology and Laser Therapy
Phone +49 241 8906-202
martin.wehner@ilt.fraunhofer.de
Fraunhofer Institute for Laser Technology ILT
Steinbachstrasse 15
52074 Aachen
Phone +49 241 8906-0
Fax +49 241 8906-121

Media Contact

Axel Bauer Fraunhofer ILT

More Information:

http://www.ilt.fraunhofer.de

All latest news from the category: Trade Fair News

Back to home

Comments (0)

Write a comment

Newest articles

Lighting up the future

New multidisciplinary research from the University of St Andrews could lead to more efficient televisions, computer screens and lighting. Researchers at the Organic Semiconductor Centre in the School of Physics and…

Researchers crack sugarcane’s complex genetic code

Sweet success: Scientists created a highly accurate reference genome for one of the most important modern crops and found a rare example of how genes confer disease resistance in plants….

Evolution of the most powerful ocean current on Earth

The Antarctic Circumpolar Current plays an important part in global overturning circulation, the exchange of heat and CO2 between the ocean and atmosphere, and the stability of Antarctica’s ice sheets….

Partners & Sponsors