Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

What is process technology?

Process technology is when a product is manufactured from a raw material by using chemical, biological or physical processes.

Process technology can be viewed as the time between the production of a raw material and the manufacture of a product. The number of processes that are involved plays no role here. A good example is the manufacture of various metals from iron ore. Or petroleum, which has to be processed so that various end products can be manufactured using process technology. Process technology uses processes to modify more than just raw materials. This can include recyclable materials for instance. Especially in today's "green environment",process technology is utilized to process renewable raw materials , or bioenergy as it's called. This can involve different grains and other raw materials such as rape seed, from which bioenergy can be produced through various processes.

There is more than one process technology

Process technology is not limited to a single process. It can be classified into five different process technologies, all of which involve their own process. First, there is thermal process technology , which deals with distillation. In contrast to thermal process technology, chemical process technology relies on chemical processes such as hydrolysis. Electrochemical process technology utilizes electrochemical processes such as the synthesis of various chemicals. Process technologies based solely on biological processes focus more on the use of bacteria, fungi or yeast.

Every process technology brings advantages and disadvantages. For this reason, the process technology must be selected on a case by case basis. Companies frequently utilize various process technologies to achieve the optimum result.

Hydrolysis in chemicals and industry

Hydrolysis uses a chemical process to split water into hydrogen and oxygen. Hydrolysis also involves the chemical separation of crystallization water. The opposite of hydrolysis is dehydration synthesis, which as the term implies involves the splitting of hydrogen instead of water.

How does hydrolysis work?

The application of phosphoric or sulfuric acid as catalysts in hydrolysis causes alcohols to react for instance. The water then separates from the alcohol through the hydrolysis process. Hydrolysis can also be induced by using zinc chloride. Viewed on a large-scale, hydrolysis can also be activated at a specific pressure, which triggers the hydrolysis during the vapor phase. Alcohols frequently react with one another during hydrolysis. This hydrolysis process creates one molecule from two molecules of ethanol alcohol during the vapor phase at a temperature of 260°C. All of this can be triggered through hydrolysis.

What else can be produced through hydrolysis?

### invalid font number 31506 In addition to acetic anhydride, which is produced by hydrolyzing acetic acid, hydrolysis is also used to produce phthalicanhydride from phthalic acid. These processes should be carried out only by trained chemists and physicists. Some processes are extremely complex and can trigger various side effects if carried out improperly. If the human body is exposed to excessive levels of acid during a process, it can result in damage to the respiratory tract.

Hydrolysis and process technology work hand in hand. A wide range of industries rely on hydrolysis for producing a variety of materials, which makes hydrolysis ideally suited for manufacturing processes.

Process Engineering

This special field revolves around processes for modifying material properties (milling, cooling), composition (filtration, distillation) and type (oxidation, hydration).

Valuable information is available on a broad range of technologies including material separation, laser processes, measuring techniques and robot engineering in addition to testing methods and coating and materials analysis processes.

Page anfang | 48 | 49 | 50 | 51 | 52 | ende

Scientists Create Carbon Nanothermometer

Scientists continue to create new uses for carbon nanotubes, those tiny cylinders comprised of pure carbon. A paper published today in the journal Nature describes a thermometer made out of a column of carbon just 10 micrometers long. According to the report, the nanodevice can measure temperatures between 50 and 500 degrees Celsius and "should be suitable for use in a wide variety of microenvironments." Yihua Gao and Yoshio Bando of the National Institute for Materials Science in Ibaraki, 07.02.2002 | nachricht Read more

Eagle eyes detect flaws in paper

Today`s machines produce paper so rapidly that visual quality control is stretched to its limits. New automated systems with cameras and image analysis algorithms manage this flood of paper with no problem - they can even tackle the job with patterned wood and textiles. The fastest papermaking machine in the world produces a roll of paper approximately 10 meters wide at the rate of 100 kilometers per hour. In less than 20 seconds the paper would cover an area the size of a soccer field. Impo 01.02.2002 | nachricht Read more

Tomorrow’s High-Temperature Superconducting Cables

Future generations of electric trains may use considerably less power than they do today thanks to the development of the first high temperature superconducting (HTS) cable. To produce the cable, Scientists at Siemens Corporate Technology in Erlangen, Germany started out with micron-sized particles of a brittle ceramic material. The particles were then embedded in a silver alloy. Through repeated rolling stages and annealing, the material was turned into ribbon-shaped wires. To make a cable from suc 27.06.2001 | nachricht Read more
Page anfang | 48 | 49 | 50 | 51 | 52 | ende

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: ScanCut project completed: laser cutting enables more intricate plug connector designs

Scientists at the Fraunhofer Institute for Laser Technology ILT have come up with a striking new addition to contact stamping technologies in the ERDF research project ScanCut. In collaboration with industry partners from North Rhine-Westphalia, the Aachen-based team of researchers developed a hybrid manufacturing process for the laser cutting of thin-walled metal strips. This new process makes it possible to fabricate even the tiniest details of contact parts in an eco-friendly, high-precision and efficient manner.

Plug connectors are tiny and, at first glance, unremarkable – yet modern vehicles would be unable to function without them. Several thousand plug connectors...

Im Focus: New Strategy Against Osteoporosis

An international research team has found a new approach that may be able to reduce bone loss in osteoporosis and maintain bone health.

Osteoporosis is the most common age-related bone disease which affects hundreds of millions of individuals worldwide. It is estimated that one in three women...

Im Focus: AI & single-cell genomics

New software predicts cell fate

Traditional single-cell sequencing methods help to reveal insights about cellular differences and functions - but they do this with static snapshots only...

Im Focus: TU Graz Researchers synthesize nanoparticles tailored for special applications

“Core-shell” clusters pave the way for new efficient nanomaterials that make catalysts, magnetic and laser sensors or measuring devices for detecting electromagnetic radiation more efficient.

Whether in innovative high-tech materials, more powerful computer chips, pharmaceuticals or in the field of renewable energies, nanoparticles – smallest...

Im Focus: Tailored light inspired by nature

An international research team with Prof. Cornelia Denz from the Institute of Applied Physics at the University of Münster develop for the first time light fields using caustics that do not change during propagation. With the new method, the physicists cleverly exploit light structures that can be seen in rainbows or when light is transmitted through drinking glasses.

Modern applications as high resolution microsopy or micro- or nanoscale material processing require customized laser beams that do not change during...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

“Conference on Laser Polishing – LaP 2020”: The final touches for surfaces

23.07.2020 | Event News

Conference radar for cybersecurity

21.07.2020 | Event News

Contact Tracing Apps against COVID-19: German National Academy Leopoldina hosts international virtual panel discussion

07.07.2020 | Event News

 
Latest News

Rare Earth Elements in Norwegian Fjords?

06.08.2020 | Earth Sciences

Anode material for safe batteries with a long cycle life

06.08.2020 | Power and Electrical Engineering

Turning carbon dioxide into liquid fuel

06.08.2020 | Life Sciences

VideoLinks
Science & Research
Overview of more VideoLinks >>>