Focus will also be put on a new polymer-metal composite material which is suitable for the structural monitoring of components or for seawater desalination applications.
Effective and residue-free demolding, as well as coating
It is a process that is repeated hundreds of thousands of times a day in industry on a small scale: A component is manufactured using a mold and thereafter removed from the mold. New technologies from Fraunhofer IFAM, namely FlexPLAS® release films and ReleasePLAS® mold coating technology, allow effective demolding of components without the need to use release agents.
The FlexPLAS® release film technology was awarded the “AVK Innovation Prize 2012” and the “Composite Innovations Award 2013”. Features of these films are their extreme elasticity and durability. They can be stretched with little force and can even withstand extreme elongation of up to 300 percent without functionality impairment. This is ideal for fold-free application, even on curved or structured molds. The films can also be used manufacturing very large components made of fiber reinforced plastics (FRPs).
Following demolding, the components can be immediately coated without the need for complex pre-treatment. This is because there is no transfer of materials from the release film, meaning no costs are incurred removing contaminants or residues of release agents. The new technology also allows the in-mold coating of fiber composite components: This process is relatively easy and involves applying a gel coat to the FlexPLAS® release film. The degree of matt/gloss of the coated surface can be adjusted via the roughness of the FlexPLAS® release film that is employed. This coating technique significantly lowers the risk of coating defects. The production of the FRP component itself takes place on top of the coating. The in-mold coating and FRP component are cured together and the coated component with the release film is then removed from the mold. If the release film is kept on the component to the end of the manufacturing process or until delivery to the final customer, then it also serves as a protective film.
In contrast, the ReleasePLAS® coating is applied directly to the mold. It perfectly matches the surface structure and its properties can be adapted to various customer-specific requirements.
New composite material conduct heat and electricity
The new material is a mixture of plastic and metal, namely a “polymer-metal composite”. A wide range of polymers can be used as the matrix material for the composite. The material can therefore be readily customized for specific applications. Other advantages: The material is easy to process because of his plastic character. It is also light and conducts electricity and heat very effectively due to the high metal content.
The composite material is ideal for the structural monitoring of load-bearing components. When a component is exposed to loads, the electrical resistance of the composite changes. These signals can be transmitted via a cable on the component and then analyzed by a measuring instrument. The composite material is used in the form of heat-conducting pipes for seawater desalination. The principle of desalination: Seawater is sprayed onto pipes through which hot gas or water flows, so heating the pipes. Pure water evaporates from the seawater leaving behind a salty waste liquor.
K 2013 I October 16-23, 2013 I Düsseldorf I Germany
Hall 07 I Stand B05
Anne-Grete Becker | Source: Fraunhofer-Institut
Further information: www.ifam.fraunhofer.de
More articles from Trade Fair News:
Siemens launches Artis one angiography system for universal use
02.12.2013 | Siemens AG
COMPAMED is holding on to its position as international leading market place for medical devices
02.12.2013 | IVAM Fachverband für Mikrotechnik
International team of scientists develops new feedback method for optimizing the laser pulse shapes used in the control of chemical reactions
In many ways, traditional chemical synthesis is similar to cooking. To alter the final product, you can change the ingredients or their ratio, change the method of mixing ingredients, or change the temperature or pressure of the environment of the ingredients.
Like an accomplished chef, chemists have become very skilled ...
A genetic defect protects mice from infection with influenza viruses
A new study published in the scientific journal PLOS Pathogens points out that mice lacking a protein called Tmprss2 are no longer affected by certain flu viruses.
The discovery was made by researchers from the Helmholtz Centre for Infection Research (HZI) in Braunschweig in collaboration with colleagues from Göttingen and ...
The Light: Global study gets underway with online user survey
Light has a fundamental impact on our sense of well-being and performance. In cooperation with Zumtobel, a supplier of lighting solutions, Fraunhofer IAO has launched a global user survey of lighting quality in offices. The objective is to identify the best lighting conditions for a variety of spaces and lighting ...
Quantum entanglement, a perplexing phenomenon of quantum mechanics that Albert Einstein once referred to as “spooky action at a distance,” could be even spookier than Einstein perceived.
Physicists at the University of Washington and Stony Brook University in New York believe the phenomenon might be intrinsically linked with wormholes, hypothetical features of space-time that in popular science fiction can provide a much-faster-than-light shortcut from one part of the universe to another.
But here’s the catch: One couldn’t actually ...
A star is formed when a large cloud of gas and dust condenses and eventually becomes so dense that it collapses into a ball of gas, where the pressure heats the matter, creating a glowing gas ball – a star is born.
New research from the Niels Bohr Institute, among others, shows that a young, newly formed star in the Milky Way had such an explosive growth, that it was initially about 100 times brighter than it is now. The results are published in the scientific journal, Astrophysical Journal Letters.
The young ...
06.12.2013 | Materials Sciences
06.12.2013 | Life Sciences
06.12.2013 | Life Sciences
05.12.2013 | Event News
04.12.2013 | Event News
12.11.2013 | Event News