Laser welding plays an important role not only in sheet metal processing, but also in the research work carried out at the LZH. Highlights at the fair EuroBLECH include laser welding of 23 mm thick metal sheets for ship building or pipeline construction, or how lasers can be used for welding a three meter long ship rudder made of steel-aluminum sandwich plates, cutting the weight of the rudder in half.
Even if laser cutting has been well established for several years, there are always new challenges. The LZH will be showing that lasers can be used to economically cu many different materials (e.g. alloys and non-ferrous metals) and different material thicknesses.
Laser surface treatment is interesting for rapid prototyping, for generating small structures (laser sintering) with a resolution of only 30 µm. The LZH will also be showing how laser deposition welding and repair welding can help reduce costs, for example for repairing so-called blisks (a turbine or engine component consisting of a single element combining the rotor disk and the blades).
Further exhibits and information can be found on www.lzh.de, or make an appointment with one of our experts at the fair. We hope to see you at the EuroBLECH 2012, in Hall 11, Stand H 08.
Laser Zentrum Hannover e.V.
D-30419 Hannover, Germany
Tel.: +49 511 2788-151
Fax: +49 511 2788-100
The Laser Zentrum Hannover e.V. (LZH) carries out research and development in the field of laser technology and is supported by the Ministry of Economic Affairs, Labour and Transport of the State of Lower Saxony (Niedersächsisches Ministerium für Wirtschaft, Arbeit und Verkehr).
Michael Botts | Source: Laser Zentrum Hannover e.V.
Further information: www.lzh.de
More articles from Trade Fair News:
EADCO and PC-Aero present at the Paris Airshow for the first time the full electric 6 seats ....
17.06.2013 | PC-Aero GmbH
Fraunhofer ILT heads toward digital photonic production
14.06.2013 | Fraunhofer-Institut für Lasertechnik ILT
... two engines aircraft project “Elektro E6”.
The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.
EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...
Siemens scientists have developed new kinds of ceramics in which they can embed transformers.
The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.
The new technology was developed in cooperation with industrial and research partners who ...
Cheaper clean-energy technologies could be made possible thanks to a new discovery.
Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...
The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.
Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.
Now in its fortieth year, LASER World ...
It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.
Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.
The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...
18.06.2013 | Materials Sciences
18.06.2013 | Health and Medicine
18.06.2013 | Life Sciences
14.06.2013 | Event News
13.06.2013 | Event News
10.06.2013 | Event News