At Chillventa 2012 from October 9 to 11 in Nuremberg/Germany, DuPont Refrigerants (Hall 4, Booth 410) will be showcasing new refrigerant solutions that will significantly reduce the environmental impact of refrigeration and air conditioning equipment.
The new range of DuPont™ Opteon® refrigerant products currently under development have a much lower GWP (Global Warming Potential) impact than historically used refrigerants. Besides Opteon® XP10, which has already been under development for commercial refrigeration applications (medium-temperature range), new products will be featured for potential use in air conditioning equipment and heat pumps. In addition, DuPont will provide information on the ISCEON® 9-series product portfolio, a family of products commercially available today and designed specifically to enable easy conversion of existing R-22 refrigeration and air conditioning equipment, allowing end users to continue to utilise their existing equipment for the remainder of its useful life.
In four presentations, experts from the company will give insights into the current development status of low-GWP technologies in various applications as well as highlight the dangers of counterfeit refrigerants. Details of the time and venue for these presentations can be obtained by inquiring at the exhibition booth or consulting the official programme of events.
DuPont™ Opteon® family of low-GWP refrigerants expanding
A special feature of the new DuPont™ Opteon® family of low-GWP refrigerants is their optimal balance of properties including efficient performance, reduced environmental impact, high safety in use, and low total operating costs. The range is based on specially developed HFO technology.
DuPont introduced Opteon® XP10 as its leading low GWP refrigerant under development at Chillventa 2010. This product is designed as an alternative to R134a in commercial refrigeration applications (medium-temperature range). Its GWP value of approximately 600 is considerably below that of R134a (GWP: 1430) but it has similar thermodynamic properties and is non-flammable. It is therefore suitable both for new equipment and for existing equipment operating with R134a technology.
DuPont is also developing and testing a series of other refrigerants that can be used in commercial refrigeration applications for the replacement of R404A/R507, air conditioning applications and heat pumps for the replacement of R410A, and chillers for the replacement of R134a and R123. At Chillventa, the company will introduce a new HFO molecule under development named DR-2. This development product is suitable for use in high-temperature heat pumps, the organic rankine cycle process, chillers operating with low-pressure technology, and as a heat transfer fluid.
DuPont™ ISCEON® 9-series – leading global solution for efficient replacement of R-22
The DuPont™ ISCEON® 9-series has now become the leading global solution for cost-effective and efficient transition out of R-22 in existing equipment. It is a family of non-ozone-depleting retrofit refrigerants, which enables continued use of existing refrigeration and air conditioning equipment without the need for costly investment in replacement equipment or extensive modification measures.
According to EU Regulation EC1005/2009, only reclaimed or recycled HCFCs may be used for maintenance or servicing of air conditioning and refrigeration equipment up to the end of 2014. Then, from January 1, 2015, there will be a complete ban on the use of these substances.
Joachim Gerstel, Market Development Manager EMEA, DuPont Refrigerants, commented: “The amount of recycled R-22 is already limited today. Since dealers and distributors expect a further shortage due to steadily decreasing returned quantities of R-22, we advise rapid conversion to avoid shutdown of equipment and the costs associated with this. The work required for conversion can generally be carried out as part of routine maintenance and servicing during normal business operation. DuPont is committed to assuring that ISCEON® 9-series refrigerants will be widely available in sufficient quantities.”
DuPont has been active in the refrigerants sector for more than 80 years and is one of the market leaders and innovation drivers. As such, the company responds quickly to political and industry initiatives and develops suitable solutions that can help further reduce the environmental impact of air conditioning and refrigeration equipment.
DuPont is a leading global supplier of refrigerants, using science and technology, market knowledge and global reach to provide sustainable materials and solutions to enhance personal comfort, enable food preservation, improve industrial processing and reduce environmental footprints. For more information, please visit http://refrigerants.dupont.com.
DuPont (NYSE: DD) has been bringing world-class science and engineering to the global marketplace in the form of innovative products, materials, and services since 1802. The company believes that by collaborating with customers, governments, NGOs, and thought leaders we can help find solutions to such global challenges as providing enough healthy food for people everywhere, decreasing dependence on fossil fuels, and protecting life and the environment. For additional information about DuPont and its commitment to inclusive innovation, please visit www.dupont.com.
The DuPont Oval Logo, DuPont™, The miracles of science™,Opteon® and ISCEON® are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates.
DuPont de Nemours (Deutschland) GmbH
Horst Ulrich Reimer
Public Relations Manager Europe, Middle East, Africa
Performance Chemicals & Fluoroproducts
Tel.: +49 (0) 6102 18-1297
Horst Ulrich Reimer | Source: DuPont
Further Reports about: air conditioning > Chillventa > DuPont > End User Development > environmental footprint > environmental impact > environmental risk > GWP > HFO > Impact > ISCEON® > Opteon® > Refrigerants > refrigeration equipment
More articles from Trade Fair News:
EADCO and PC-Aero present at the Paris Airshow for the first time the full electric 6 seats ....
17.06.2013 | PC-Aero GmbH
Fraunhofer ILT heads toward digital photonic production
14.06.2013 | Fraunhofer-Institut für Lasertechnik ILT
... two engines aircraft project “Elektro E6”.
The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.
EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...
Siemens scientists have developed new kinds of ceramics in which they can embed transformers.
The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.
The new technology was developed in cooperation with industrial and research partners who ...
Cheaper clean-energy technologies could be made possible thanks to a new discovery.
Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...
The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.
Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.
Now in its fortieth year, LASER World ...
It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.
Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.
The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...
18.06.2013 | Materials Sciences
18.06.2013 | Health and Medicine
18.06.2013 | Life Sciences
14.06.2013 | Event News
13.06.2013 | Event News
10.06.2013 | Event News