Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Updated filtration products from Siemens increase flexibility and cost effectiveness of water treatment

21.06.2010
Siemens will highlight updates to existing filtration products at the AWWA ACE Conference in Chicago. In the future, customers will be able to choose from an extended range of systems for treating water even more cost effectively.

The reconfigured Memcor CP ultrafiltration product line provides up to 50% more membrane area in the same footprint than previous pressurized module designs. Siemens has also expanded the Memcor XP product line, doubling the flow range to up to 500,000 gallons per day (GPD). Finally, the Trident HSC system has been expanded to include two new sizes between 7.5 and 15 million gallons per day (MGD).


“We are continually upgrading our products to offer customers an even wider range of system choices to cost effectively meet their water treatment needs,” said Stratton Tragellis, Global Director for the “Purified Water Municipal” Segment at Siemens Water Technologies. “The improvements to the Memcor CP and XP ultrafiltration systems will deliver the same high quality effluent while offering a higher flow rate in a smaller system – a win win for the customer.”

The Memcor CP system is a compact pressurized, pre-engineered system with a modular building-block design that reduces installation costs and simplifies operation. The hollow-fiber membranes provide a verifiable barrier, ensuring removal of turbidity, suspended solids, viruses and pathogens. The Memcor CP system is ideally suited for small communities. Now, using Memcor L20V PVdf membranes, the CP system allows for better use of available space, reducing equipment cost by up to 20% compared to earlier CP designs. Three CP models are available that provide 120, 240 and 960 MGD.

The Memcor XP pressurized membrane system is a compact, self-contained filtration system that is shipped fully assembled and factory tested, minimizing integration, installation and startup costs. The updated product line uses L20V membranes, allowing up to 500,000 GPD from one skidded system.

The Trident HSC system is a multi-barrier clarifier with proven coagulation-flocculation technology at high rates to minimize the required footprint. Ideally suited for surface and groundwater treatment, the Trident HSC system uses series-operated stages that reduce incoming contaminants to produce high quality effluent while providing back-up protection for the overall process. In the updated version, the controls have been simplified for distributed flow splitting to the clarifier section. The entire Trident HSC system process train consists of corrosion resistant components of either stainless steel or aluminum.

Memcor and Trident are trademarks of Siemens and/or its affiliates in some countries.

The Siemens Industry Sector (Erlangen, Germany) is the worldwide leading supplier of environmentally friendly production, transportation, building and lighting technologies. With integrated automation technologies and comprehensive industry-specific solutions, Siemens increases the productivity, efficiency and flexibility of its customers in the fields of industry and infrastructure. The Sector consists of six divisions: Building Technologies, Drive Technologies, Industry Automation, Industry Solutions, Mobility und Osram. With around 207,000 employees worldwide (September 30), Siemens Industry achieved in fiscal year 2009 total sales of approximately €35 billion.

The Siemens Industry Solutions Division (Erlangen, Germany) is one of the world's leading solution and service providers for industrial and infrastructure facilities comprising the business activities of Siemens VAI Metals Technologies, Water Technologies and Industrial Technologies. Activities include engineering and installation, operation and service for the entire life cycle. A wide-ranging portfolio of environmental solutions helps industrial companies to use energy, water and equipment efficiently, reduce emissions and comply with environmental guidelines. With around 31,000 employees worldwide (September 30), Siemens Industry Solutions posted sales of €6.8 billion in fiscal year 2009.

Dr. Rainer Schulze | Siemens Industry
Further information:
http://www.siemens.com/water
http://www.siemens.com/industry
http://www.siemens.com/industry-solutions

More articles from Trade Fair News:

nachricht Fraunhofer HHI at Mobile World Congress with VR and 5G technologies
24.02.2017 | Fraunhofer-Institut für Nachrichtentechnik, Heinrich-Hertz-Institut, HHI

nachricht MWC 2017: 5G Capital Berlin
24.02.2017 | FOKUS - Fraunhofer-Institut für Offene Kommunikationssysteme

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

New technology offers fast peptide synthesis

28.02.2017 | Life Sciences

WSU research advances energy savings for oil, gas industries

28.02.2017 | Power and Electrical Engineering

Who can find the fish that makes the best sound?

28.02.2017 | Information Technology

VideoLinks
B2B-VideoLinks
More VideoLinks >>>