Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

TWO in ONE Cable from SAB presented at the exhibition AUTOMATICA from 03.-06. Juni 2014 (Hall B4, Stand 105)

23.04.2014

 

Manufacturers of drive units are able to reduce the wiring effort considerably and are at the same time able to save space , weight and costs

Until now in drive technique generally two cables were needed. A cable for the power supply of the drive and a transmission cable for the signal transfer to the control unit.

The development of new digital transmission systems makes possible the use of the so called one cable solution. Herewith, sensor signals and power supply is realized by a single cable. 

The one cable solution by SAB combines the two functions in one cable. 

The advantage for drive unit manufactures is evident. Due to the use of only one cable the wiring effort is reduced considerably. Low weight and space saving are further advantages especially for highly flexible applications as for example in cable tracks. 

As an expert for special solutions SAB offers several one cable solutions which have been tested in our own technical center with regard to its capacity towards millions of bending cycles. 

Cable manufacturer - SAB Bröckskes is one of the leading manufacturers of cables, cable harnessing and temperature measurement technique worldwide. More than 60 years of experience in cable manufacturing and temperature measurement technique have made a one man business a company with almost 500 staff members. Our strengths are not only the production of standard cables but also the construction of special items. Every year SAB manufactures more than 1500 special cables on customers´ requirements.

Contact

Sacir Adrovic

adrovic@sab-broeckskes.de

02162/898146

02162/898147

www.sab-worldwide.com

www.sab-cable.com

Sacir Adrovic | SAB Bröckskes

More articles from Trade Fair News:

nachricht Come Together: Teamwork Achieves Optimum Composite Design
14.02.2018 | Fraunhofer-Institut für Lasertechnik ILT

nachricht Innovative materials and fabrication technology at the summit of nanotechnology in Tokyo
08.02.2018 | IVAM Fachverband für Mikrotechnik

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Demonstration of a single molecule piezoelectric effect

Breakthrough provides a new concept of the design of molecular motors, sensors and electricity generators at nanoscale

Researchers from the Institute of Organic Chemistry and Biochemistry of the CAS (IOCB Prague), Institute of Physics of the CAS (IP CAS) and Palacký University...

Im Focus: Hybrid optics bring color imaging using ultrathin metalenses into focus

For photographers and scientists, lenses are lifesavers. They reflect and refract light, making possible the imaging systems that drive discovery through the microscope and preserve history through cameras.

But today's glass-based lenses are bulky and resist miniaturization. Next-generation technologies, such as ultrathin cameras or tiny microscopes, require...

Im Focus: Stem cell divisions in the adult brain seen for the first time

Scientists from the University of Zurich have succeeded for the first time in tracking individual stem cells and their neuronal progeny over months within the intact adult brain. This study sheds light on how new neurons are produced throughout life.

The generation of new nerve cells was once thought to taper off at the end of embryonic development. However, recent research has shown that the adult brain...

Im Focus: Interference as a new method for cooling quantum devices

Theoretical physicists propose to use negative interference to control heat flow in quantum devices. Study published in Physical Review Letters

Quantum computer parts are sensitive and need to be cooled to very low temperatures. Their tiny size makes them particularly susceptible to a temperature...

Im Focus: Autonomous 3D scanner supports individual manufacturing processes

Let’s say the armrest is broken in your vintage car. As things stand, you would need a lot of luck and persistence to find the right spare part. But in the world of Industrie 4.0 and production with batch sizes of one, you can simply scan the armrest and print it out. This is made possible by the first ever 3D scanner capable of working autonomously and in real time. The autonomous scanning system will be on display at the Hannover Messe Preview on February 6 and at the Hannover Messe proper from April 23 to 27, 2018 (Hall 6, Booth A30).

Part of the charm of vintage cars is that they stopped making them long ago, so it is special when you do see one out on the roads. If something breaks or...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

2nd International Conference on High Temperature Shape Memory Alloys (HTSMAs)

15.02.2018 | Event News

Aachen DC Grid Summit 2018

13.02.2018 | Event News

How Global Climate Policy Can Learn from the Energy Transition

12.02.2018 | Event News

 
Latest News

Fingerprints of quantum entanglement

16.02.2018 | Information Technology

'Living bandages': NUST MISIS scientists develop biocompatible anti-burn nanofibers

16.02.2018 | Health and Medicine

Hubble sees Neptune's mysterious shrinking storm

16.02.2018 | Physics and Astronomy

VideoLinks
Science & Research
Overview of more VideoLinks >>>