Syngo DynaCT Cardiac from Siemens: 3D images for cardiovascular imaging

During transfemoral aortic valve replacement, a heart valve prosthesis gets implanted via peripheral artery access. To position aortic valve prostheses accurately, the cardiologist must have very precise knowledge of the individual anatomy of the patient’s aorta.

That's where syngo DynaCT Cardiac comes in: During the intervention, it generates CT-like cross-sectional images on an angiographic C-arm system and offers 3D reconstruction of the aortic root. These 3D images can be overlaid on actual fluoroscopic images and provide a kind of three-dimensional roadmap for the examiner. Thus, with syngo DynaCT Cardiac, the cardiologist can position the valve prosthesis more accurate and more quickly than before.

For most patients worldwide, open heart surgery is performed for the placement of an aortic valve prosthesis. The most frequent reason for this intervention is the constriction of the valve, so-called aortic valve stenosis, which occurs primarily in elderly persons. In the course of time the valve loses elasticity and no longer fully opens. This decreases the flow of blood, and the organs no longer receive a sufficient supply of oxygen. Normally, the operation requires opening the sternum. The heart has to be temporarily stopped and its function taken over by a heart-lung machine. Especially for elderly and severely ill patients with accompanying diseases such as heart failure, renal failure and diabetes, such an intervention is risky.

Recently, new procedures have been developed in which the the aortic valve prosthesis is implanted in the heart using a catheter rather than through the usual open heart surgery. This involves an intervention often performed jointly by the cardiologist and the heart surgeon. First, through a small incision in the groin artery, a special balloon catheter is guided to the heart to dialate the stenosed aortic valve. Then, a collapsed heart valve is also inserted up to the valve level via a balloon catheter; there it is unfolded and attached to the surrounding tissue with a so-called “stent”.

For such complex transcatheter techniques, high-performance angiographic systems like those in the Siemens Artis zee family are used, since they provide the best possible imaging, even in a completely sterile OR environment. With these systems physicians can follow the minimally invasive intervention on an X-ray screen while directly monitoring the function of the valve prosthesis, which can possibly spare the patient postoperative measures.

Prior to such interventions it is imperative that the cardiologist gets a comprehensive picture of the heart and vessels. Previously, this normally required imaging with CT scanners or MRI systems, which led to additional costs. For this reason, Siemens (as the first company in the medical field in 2004) developed an application that can generate CT-like 3D images directly on an angiography system: Syngo DynaCT. The application has been continually fine-tuned and developed, so that today it combines the advantages of three-dimensional CT imaging with live X-ray imaging of the beating heart in one examination and on a single system. The CT-like images of the heart are produced by rotating the C-arm at high speed around the patient. In this way, several hundred images are acquired and reconstructed as 3D volumes. If the acquisition is triggered via the patient ECG, even time-dependent 3D volumes can be generated for visualization of the beating heart. The complete 3D image is available in less than a minute. Anatomical structure segments are overlaid with the live X-ray image, allowing the physician to navigate with the catheter quickly and confidently without the use of a contrast medium.

The Siemens Healthcare Sector is one of the largest suppliers of healthcare technology worldwide. The company is a medical solution provider with core competences and innovative strengths in diagnostic and therapeutic technologies as well as knowledge processing, including information technology and system integration. With its acquisitions in laboratory diagnostics, Siemens Healthcare is the first integrated healthcare company that combines imaging and lab diagnostics, therapy solutions and medical information technology and also supplements these with consultation and services. Siemens Healthcare offers solutions for the entire supply chain under one roof – from prevention and early detection to diagnosis and to treatment and aftercare. In addition, Siemens Healthcare is the global brand leader for innovative hearing aids. Siemens Healthcare currently has around 49,000 employees worldwide and is represented in more than 130 countries. During fiscal 2008 (ending on September 30), Siemens Healthcare achieved a total sales volume of € 11.17 billion and incoming orders totaling € 11.78 billion. The Group earnings amounted to € 1.23 billion.

Media Contact

Marion Bludszuweit Siemens Healthcare

All latest news from the category: Trade Fair News

Back to home

Comments (0)

Write a comment

Newest articles

Lighting up the future

New multidisciplinary research from the University of St Andrews could lead to more efficient televisions, computer screens and lighting. Researchers at the Organic Semiconductor Centre in the School of Physics and…

Researchers crack sugarcane’s complex genetic code

Sweet success: Scientists created a highly accurate reference genome for one of the most important modern crops and found a rare example of how genes confer disease resistance in plants….

Evolution of the most powerful ocean current on Earth

The Antarctic Circumpolar Current plays an important part in global overturning circulation, the exchange of heat and CO2 between the ocean and atmosphere, and the stability of Antarctica’s ice sheets….

Partners & Sponsors