Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Russian-German Laser Network at the Photonics Fair in Moscow

11.03.2009
The "Network of Russian-German Laser Centers" will be exhibiting at the fair "Photonics. World of Lasers and Optics" from April 20th to 23rd, 2009 in Moscow.

The five members of the expert network will present their services in the field of laser technology at a joint exhibition stand.

The individual "Laser Innovation Technological Centers (LITC)" from Moscow, Yekaterinburg, Kaluga, Rostov and St. Petersburg are especially geared towards small and medium-sized enterprises (SME's).

The idea behind the LITC is based on the network of laser testing and consulting centers, which was founded in Germany in 1996. Like in Germany, the Russian LITC aim at presenting their laser know-how to a wide industrial base, acting as a sort of "jump start" in laser technology for SME's.

The five Russian centers will not only present the network at the Photonics fair in Moscow, but will also show uses of laser technology in industry, including samples that were manufactured in the course of the project.

The project leader and stand organizer is the Laser Zentrum Hannover (LZH), who is bringing the expertise they gained in the project in Germany into the LITC. "If the Russian network is as successful as the German network was," says project head Klaus Nowitzki of the LZH, "there will soon be a boom in the industrial use of lasers in Russia."

The network of Russian-German Laser Centers LITC, which is supported by the Germany Ministry of Education and Research (BMBF), is located in Pavilion 3, Stand G 30.

Contact:
Laser Zentrum Hannover e.V. (LZH)
Michael Botts
Hollerithallee 8
D-30419 Hannover Tel.: +49 511 2788-151
Fax: +49 511 2788-100
E-Mail: m.botts@lzh.de
The Laser Zentrum Hannover e.V. (LZH) carries out research and development in the field of laser technology and is supported by the Ministry of Economic Affairs, Labour and Transport of the State of Lower Saxony (Niedersächsisches Ministerium für Wirtschaft, Arbeit und Verkehr).

Michael Botts | idw
Further information:
http://www.lzh.de

More articles from Trade Fair News:

nachricht Come Together: Teamwork Achieves Optimum Composite Design
14.02.2018 | Fraunhofer-Institut für Lasertechnik ILT

nachricht Innovative materials and fabrication technology at the summit of nanotechnology in Tokyo
08.02.2018 | IVAM Fachverband für Mikrotechnik

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Demonstration of a single molecule piezoelectric effect

Breakthrough provides a new concept of the design of molecular motors, sensors and electricity generators at nanoscale

Researchers from the Institute of Organic Chemistry and Biochemistry of the CAS (IOCB Prague), Institute of Physics of the CAS (IP CAS) and Palacký University...

Im Focus: Hybrid optics bring color imaging using ultrathin metalenses into focus

For photographers and scientists, lenses are lifesavers. They reflect and refract light, making possible the imaging systems that drive discovery through the microscope and preserve history through cameras.

But today's glass-based lenses are bulky and resist miniaturization. Next-generation technologies, such as ultrathin cameras or tiny microscopes, require...

Im Focus: Stem cell divisions in the adult brain seen for the first time

Scientists from the University of Zurich have succeeded for the first time in tracking individual stem cells and their neuronal progeny over months within the intact adult brain. This study sheds light on how new neurons are produced throughout life.

The generation of new nerve cells was once thought to taper off at the end of embryonic development. However, recent research has shown that the adult brain...

Im Focus: Interference as a new method for cooling quantum devices

Theoretical physicists propose to use negative interference to control heat flow in quantum devices. Study published in Physical Review Letters

Quantum computer parts are sensitive and need to be cooled to very low temperatures. Their tiny size makes them particularly susceptible to a temperature...

Im Focus: Autonomous 3D scanner supports individual manufacturing processes

Let’s say the armrest is broken in your vintage car. As things stand, you would need a lot of luck and persistence to find the right spare part. But in the world of Industrie 4.0 and production with batch sizes of one, you can simply scan the armrest and print it out. This is made possible by the first ever 3D scanner capable of working autonomously and in real time. The autonomous scanning system will be on display at the Hannover Messe Preview on February 6 and at the Hannover Messe proper from April 23 to 27, 2018 (Hall 6, Booth A30).

Part of the charm of vintage cars is that they stopped making them long ago, so it is special when you do see one out on the roads. If something breaks or...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

VideoLinks
Industry & Economy
Event News

2nd International Conference on High Temperature Shape Memory Alloys (HTSMAs)

15.02.2018 | Event News

Aachen DC Grid Summit 2018

13.02.2018 | Event News

How Global Climate Policy Can Learn from the Energy Transition

12.02.2018 | Event News

 
Latest News

Fingerprints of quantum entanglement

16.02.2018 | Information Technology

'Living bandages': NUST MISIS scientists develop biocompatible anti-burn nanofibers

16.02.2018 | Health and Medicine

Hubble sees Neptune's mysterious shrinking storm

16.02.2018 | Physics and Astronomy

VideoLinks
Science & Research
Overview of more VideoLinks >>>