The French Pavilion, which will be located in Halls 2, 3, 8 and 11 (booths 2B39, 2C40, 2A30, 3B20, 8B30 and 11D70) of the IBC trade show, in Amsterdam (in The Netherlands), will present 34 exhibitors in radio and television, in the electronic media, and in content-generating industries.
French expertise from across the sector will be showcased, including lighting, video and sound technology; vision solutions; broadcasting software; video distribution; and, finally, radio-broadcast systems. A full list of exhibitors on the French Pavilion is available upon request.
The audio-visual sector in France has been revolutionised by the development of digital technology. The major technological breakthrough, over recent years, has been the successful roll-out of digital terrestrial television (DTTV), whose successful deployment has been faster and smoother than most industry watchers expected. Since the start of 2011, over 90% of the French population has been covered. The deployment of DTTV is continuing, with a goal of reaching 95% of the population by the end of 2011.
Digital radio is also growing in France. Digital radio will allow for an increase in the volume of radio programmes (since the FM bandwidth is currently saturated), as well as better coverage, with a single frequency for each radio station. In the future, it will also be possible to display information and/or images on the screens of digital radio receivers.
About France Broadcast
France Broadcast is an association for the broadcast-radio industry in France. Its members are primarily innovative SMEs that are increasing their operations and sales through exports, while being strongly committed to sustainable development. France Broadcast supports initiatives that promote French technology, as well as projects designed to maintain or create jobs in the audio-visual industry.
For further information, please go to: www.france-broadcast.fr
The Paris Chamber of Commerce & Industry (Chambre de Commerce et d'Industrie de Paris, or CCIP) represents and promotes the interests of companies based in Paris (France). CCIP is run by an elected board of 84 company managers.
CCIP supports businesses, especially SMEs, at every stage of their development, with a particular focus on international growth. In its educational institutions, CCIP trains 16,000 young people every year, including 4,300 apprentices, as well as 30,000 adults.
With its expertise in the holding of conventions and trade shows, CCIP has joined forces with the Unibail-Rodamco group to create two entities: VIPARIS, which manages 10 major exhibition venues, and COMEXPOSIUM, which organises trade shows and events. The objective is to offer the Paris region stronger resources in order to compete on a European and international scale and, thus, enhance its attractiveness.
The Paris Chamber of Commerce & Industry is organising the 447m² French Pavilion at the IBC trade show, which will take place in Amsterdam (in The Netherlands) from 9 to 13 September 2011. The French Pavilion will be located in Halls 2, 3, 8 and 11.
For further information about IBC, please go to: http://www.ibc.org/
For further information about CCIP, please go to: www.ccip.fr
For further information, please contact :Quote ref. : FTPB3604
Mary-Ann Williams | UBIFRANCE
The Micro Nanotech area at MD&M West has been successfully established
22.02.2017 | IVAM Fachverband für Mikrotechnik
Use your Voice – and Smart Homes will “LISTEN”
21.02.2017 | EML European Media Laboratory GmbH
Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...
The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.
The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...
Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...
Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".
Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...
13.02.2017 | Event News
10.02.2017 | Event News
09.02.2017 | Event News
22.02.2017 | Power and Electrical Engineering
22.02.2017 | Life Sciences
22.02.2017 | Physics and Astronomy