Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Operator control and monitoring in special environments

18.11.2015

SPS IPC Drives 2015, Hall 11

  • Rugged Simatic industrial monitors and panel PCs for operator control and monitoring in special environments
  • Stainless steel Simatic Inox Pro devices with the high IP66K degree of protection for hygienic production areas
  • Simatic Ex OG panel PC for use in the hazardous area in zones 1/21 and 2/22 in the chemicals, oil and gas industries

Siemens launches devices for operator control and monitoring in special environments. The new monitors and panel PCs are suitable for use in hygienic production areas, such as in the food industry, and also meet the requirements of the chemical, oil and gas industries.

The new stainless steel Simatic Inox Pro devices have the high IP66K degree of protection, and are suitable for use in hygienic production areas in the food and tobacco, pharmaceutical, cosmetics, and fine chemical industries.

The devices have an analog-resistive 19-inch touch display covered by a contiguous, chemically resistant decorative foil, and also have food grade seals and splinter protection for the display.

The stainless steel enclosure is ground with a 240 grain size, which produces a surface smooth enough to protect against contamination.

The new Inox Pro devices have 19-inch displays, and are available either as the IPC277D Inox Pro industrial PC or as the IFP1900 Inox Pro Ethernet monitor. All new devices can be mounted on a stand or a jointed arm.

The new, rugged Simatic Ex OG panel PC is designed for use in the chemicals, oil and gas industries. The new panel PC has the high IP66 degree of protection throughout, and is designed for use in temperatures ranging from minus 40 to plus 65 degrees.

It is suitable for use in hazardous zones 1/21 and 2/22. The new Simatic Ex OG panel PC is available in versions with either a 4:3 format 15-inch or a 16:9 format 22-inch display.

The capacitive, multitouch glass display with automatic brightness regulation is reflection-free, even under direct sunlight. It is easy to operate, even when wearing thin gloves.

The industrial PC has a fast Intel Core i7 processor, an eight gigabyte memory, and a 300 GB SSD (solid-state drive). The Simatic Ex OG panel PC can be configured with a support arm, or with a table or floor stand. A camera, Bluetooth, WLAN and RFID reader are available as optional extras.

For further information, please see www.siemens.com/simatic-pc


Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for more than 165 years. The company is active in more than 200 countries, focusing on the areas of electrification, automation and digitalization. One of the world's largest producers of energy-efficient, resource-saving technologies, Siemens is No. 1 in offshore wind turbine construction, a leading supplier of gas and steam turbines for power generation, a major provider of power transmission solutions and a pioneer in infrastructure solutions as well as automation, drive and software solutions for industry. The company is also a leading provider of medical imaging equipment – such as computed tomography and magnetic resonance imaging systems – and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2015, which ended on September 30, 2015, Siemens generated revenue of €75.6 billion and net income of €7.4 billion. At the end of September 2015, the company had around 348,000 employees worldwide.

Further information is available on the Internet at www.siemens.com


Reference Number: PR2015110048DFEN


Contact
Mr. Gerhard Stauss
Digital Factory Division
Siemens AG

Gleiwitzer Str. 555

90475 Nuremberg

Germany

Tel: +49 (911) 895-7945

gerhard.stauss​@siemens.com

Gerhard Stauss | Siemens Digital Factory

More articles from Trade Fair News:

nachricht IVAM Product Market „High-tech for Medical Devices“ at COMPAMED 2017
18.10.2017 | IVAM Fachverband für Mikrotechnik

nachricht Fiber Optic Collimation C-Lenses will be Exhibited by FISBA at OFC 2017
14.03.2017 | FISBA AG

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Neutron star merger directly observed for the first time

University of Maryland researchers contribute to historic detection of gravitational waves and light created by event

On August 17, 2017, at 12:41:04 UTC, scientists made the first direct observation of a merger between two neutron stars--the dense, collapsed cores that remain...

Im Focus: Breaking: the first light from two neutron stars merging

Seven new papers describe the first-ever detection of light from a gravitational wave source. The event, caused by two neutron stars colliding and merging together, was dubbed GW170817 because it sent ripples through space-time that reached Earth on 2017 August 17. Around the world, hundreds of excited astronomers mobilized quickly and were able to observe the event using numerous telescopes, providing a wealth of new data.

Previous detections of gravitational waves have all involved the merger of two black holes, a feat that won the 2017 Nobel Prize in Physics earlier this month....

Im Focus: Smart sensors for efficient processes

Material defects in end products can quickly result in failures in many areas of industry, and have a massive impact on the safe use of their products. This is why, in the field of quality assurance, intelligent, nondestructive sensor systems play a key role. They allow testing components and parts in a rapid and cost-efficient manner without destroying the actual product or changing its surface. Experts from the Fraunhofer IZFP in Saarbrücken will be presenting two exhibits at the Blechexpo in Stuttgart from 7–10 November 2017 that allow fast, reliable, and automated characterization of materials and detection of defects (Hall 5, Booth 5306).

When quality testing uses time-consuming destructive test methods, it can result in enormous costs due to damaging or destroying the products. And given that...

Im Focus: Cold molecules on collision course

Using a new cooling technique MPQ scientists succeed at observing collisions in a dense beam of cold and slow dipolar molecules.

How do chemical reactions proceed at extremely low temperatures? The answer requires the investigation of molecular samples that are cold, dense, and slow at...

Im Focus: Shrinking the proton again!

Scientists from the Max Planck Institute of Quantum Optics, using high precision laser spectroscopy of atomic hydrogen, confirm the surprisingly small value of the proton radius determined from muonic hydrogen.

It was one of the breakthroughs of the year 2010: Laser spectroscopy of muonic hydrogen resulted in a value for the proton charge radius that was significantly...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ASEAN Member States discuss the future role of renewable energy

17.10.2017 | Event News

World Health Summit 2017: International experts set the course for the future of Global Health

10.10.2017 | Event News

Climate Engineering Conference 2017 Opens in Berlin

10.10.2017 | Event News

 
Latest News

Electrode materials from the microwave oven

19.10.2017 | Materials Sciences

New material for digital memories of the future

19.10.2017 | Materials Sciences

Physics boosts artificial intelligence methods

19.10.2017 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>