Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Maritime Sensor & Vehicle Technology of the Fraunhofer IBMT at the Hanover Fair 2015

18.03.2015

The Fraunhofer Institute for Biomedical Engineering IBMT has a broad and long-standing expertise in the field of ultrasound. At this year's Hanover Fair from April 13 to 17, 2015 in Hanover, it presents in particular its activities in the field of sonar on the joint Fraunhofer booth »Maritime Technologies«.

For two decades, the Fraunhofer IBMT develops ultrasound systems and transducers. The results of this work can be found in many products in the market. In particular, medical and industrial systems are traditionally important areas of work of the institute.


Modular, pressure-balanced deep-sea vehicle.

Fraunhofer

The field of the maritime technologies showed an excellent development. So, sophisticated vehicles were tested in recent years, which are equipped with their own sonar sensor systems. The depth of the vehicles´ use by its pressure-balanced design concept (without protective pressure hull) reaches up to 6,000 m, while the modular design allows for optimum adaptation to the mission objective.

At this year's Hanover Fair, the Fraunhofer IBMT presents on the joint Fraunhofer booth in Hall 13, Stand E30 Maritime Technologies. A novel multibeam echo sounder is presented based on only a single antenna. Through this space-saving design, it can be used particularly in small diving vehicles for high-resolution mapping or inspection of underwater installations.

In addition to this highlight, the Fraunhofer IBMT presents its entire range of technologies of technical ultrasound, special ultrasonic transducers to scalable modular ultrasound systems and new ultrasound method to special applications.

Visit us at the

Hanover Fair 2015
13.-17.04.2015, Hanover
Hall 13, Stand E30

Contact:
Dipl.-Ing. Christian Degel
Fraunhofer-Institute für Biomedizinische Technik IBMT
Ensheimer Strasse 48
66386 St. Ingbert, Germany

Phone: +49 6894/980-221 or +49 6897/9071-70
christian.degel@ibmt.fraunhofer.de

Weitere Informationen:

http://www.ibmt.frauhhofer.dehttp://www.ibmt.fraunhofer.de/en/Fields-of-work/ibm...

Annette Maurer | Fraunhofer-Institut für Biomedizinische Technik IBMT

More articles from Trade Fair News:

nachricht IVAM Product Market „High-tech for Medical Devices“ at COMPAMED 2017
18.10.2017 | IVAM Fachverband für Mikrotechnik

nachricht Fiber Optic Collimation C-Lenses will be Exhibited by FISBA at OFC 2017
14.03.2017 | FISBA AG

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Salmonella as a tumour medication

HZI researchers developed a bacterial strain that can be used in cancer therapy

Salmonellae are dangerous pathogens that enter the body via contaminated food and can cause severe infections. But these bacteria are also known to target...

Im Focus: Neutron star merger directly observed for the first time

University of Maryland researchers contribute to historic detection of gravitational waves and light created by event

On August 17, 2017, at 12:41:04 UTC, scientists made the first direct observation of a merger between two neutron stars--the dense, collapsed cores that remain...

Im Focus: Breaking: the first light from two neutron stars merging

Seven new papers describe the first-ever detection of light from a gravitational wave source. The event, caused by two neutron stars colliding and merging together, was dubbed GW170817 because it sent ripples through space-time that reached Earth on 2017 August 17. Around the world, hundreds of excited astronomers mobilized quickly and were able to observe the event using numerous telescopes, providing a wealth of new data.

Previous detections of gravitational waves have all involved the merger of two black holes, a feat that won the 2017 Nobel Prize in Physics earlier this month....

Im Focus: Smart sensors for efficient processes

Material defects in end products can quickly result in failures in many areas of industry, and have a massive impact on the safe use of their products. This is why, in the field of quality assurance, intelligent, nondestructive sensor systems play a key role. They allow testing components and parts in a rapid and cost-efficient manner without destroying the actual product or changing its surface. Experts from the Fraunhofer IZFP in Saarbrücken will be presenting two exhibits at the Blechexpo in Stuttgart from 7–10 November 2017 that allow fast, reliable, and automated characterization of materials and detection of defects (Hall 5, Booth 5306).

When quality testing uses time-consuming destructive test methods, it can result in enormous costs due to damaging or destroying the products. And given that...

Im Focus: Cold molecules on collision course

Using a new cooling technique MPQ scientists succeed at observing collisions in a dense beam of cold and slow dipolar molecules.

How do chemical reactions proceed at extremely low temperatures? The answer requires the investigation of molecular samples that are cold, dense, and slow at...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

3rd Symposium on Driving Simulation

23.10.2017 | Event News

ASEAN Member States discuss the future role of renewable energy

17.10.2017 | Event News

World Health Summit 2017: International experts set the course for the future of Global Health

10.10.2017 | Event News

 
Latest News

Microfluidics probe 'cholesterol' of the oil industry

23.10.2017 | Life Sciences

Gamma rays will reach beyond the limits of light

23.10.2017 | Physics and Astronomy

The end of pneumonia? New vaccine offers hope

23.10.2017 | Health and Medicine

VideoLinks
B2B-VideoLinks
More VideoLinks >>>