Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Kerneos builds dry-mix mortar solutions into European Coatings Show

23.03.2011
Kerneos, a provider of chemicals for use in construction, has announced the launch of TERNAL ® EV and TERNAL® RG-S, which will provide dry-mix mortar manufacturers with two new, innovative technical solutions. Kerneos will showcase these innovations at the European Coatings Show in Nuremberg (Germany) from 29 to 31 March 2011.

TERNAL® EV is a novel calcium aluminate binder that allows dry-mix producers to efficiently develop an entire range of self-levelling compounds with reliable and consistent performance. This addresses a common issue for dry-mix producers.

Each individual levelling compound in a range is formulated using multiple binder components, which makes it difficult to achieve a reliable outcome across a whole range of floor-levelling compounds. Each of these products is developed using a single core binder composed of a combination of TERNAL® EV and a suitable calcium sulfate (according to local availability).

The core binder allows for the creation of a wide range of levelling compounds as well as self-levelling compounds, which can be developed quickly through the adjustment of the quantity added to fillers that make up the bulk of typical formulations. (The usual range of additives must still be used in order to fine-tune the performance level.)

TERNAL® EV-based floor coatings and self-levelling floor compounds provide solutions in relation to key issues in the construction industry, such as environmental concerns and the durability of materials.

Calcium aluminates are typically used to produce dry-mix mortars with demanding time-defined performance, often relating to quite precise reactivity profiles, mechanical performance or dimensional stability. These performances can vary according to the time and date of the production of the dry-mix batch in relation to the installation date of the product. This process is widely referred to as ‘dry-mix ageing’. In an effort to dramatically reduce this, Kerneos has developed patented technology, which it has applied to its calcium-based products.

Dry-mix compounds based on this new product have demonstrated improved performance stability over time. Mortars with extended lifespans are also valued by producers exporting mortars (or those with products where stock rotation is low) due to their specialist nature, and also in terms of the advantages they present during the launch of a new mortar on the market.
Kerneos will present its innovative products at the European Coatings Show (Stand 327, Hall 9) in Nuremberg (Germany) from 29 to 31 March of this year.

Kerneos has established itself as the partner of choice for innovations in dry-mix applications. The company is committed to supporting technological development and innovation in the building sector.

About Kerneos
Kerneos is a provider of dry-mix mortar formulations as well as a wide range of calcium aluminate-based solutions, which are sold under the trademarks TERNAL® and ALAG®, as well as additives, which come under the Peramin® brand name.

Kerneos provides its customers with tailor-made services, including local technical support. The specialist company, which is headquartered near Paris (France), combines the benefits of a global industrial presence with a worldwide supply-chain network.

Kerneos will take part in the European Coatings Show (Stand 327, Hall 9), which will take place in Nuremberg (Germany) between 29 and 31 March 2011.
For further information, please go to: www.kerneos.com

For further information, please contact :
Quote ref. : FTPB3557
Ms Mary-Ann WILLIAMS - Press Officer
UBIFRANCE Press Office in London
Tel: +44 (0) 207 024 3640
mary-ann.williams@ubifrance.fr

Mary-Ann Williams | UBIFRANCE
Further information:
http://www.ubifrance.com/uk/

More articles from Trade Fair News:

nachricht Fraunhofer HHI at Mobile World Congress with VR and 5G technologies
24.02.2017 | Fraunhofer-Institut für Nachrichtentechnik, Heinrich-Hertz-Institut, HHI

nachricht MWC 2017: 5G Capital Berlin
24.02.2017 | FOKUS - Fraunhofer-Institut für Offene Kommunikationssysteme

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

New technology offers fast peptide synthesis

28.02.2017 | Life Sciences

WSU research advances energy savings for oil, gas industries

28.02.2017 | Power and Electrical Engineering

Who can find the fish that makes the best sound?

28.02.2017 | Information Technology

VideoLinks
B2B-VideoLinks
More VideoLinks >>>