Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

French Healthcare Equipment Event returns to London in July 2010

02.06.2010
The French Trade Commission UBIFRANCE in London will present 10 innovative medical-device manufacturers at the biennial French Healthcare Equipment Event, which will take place in London on 7 July 2010. These French companies will meet senior purchasing managers from the NHS and seek to establish partnerships with distributors to supply their innovative products on the British market.

The French participants are looking to develop partnerships in the UK and will be available for one-to-one business meetings during the afternoon of the French Healthcare Equipment Event, which will take place at the Sofitel St James hotel (central London) on 7 July 2010, from 12.30pm.

Companies taking part are listed below; further information is available upon request.

Asklé Santé

Asklé Santé designs, manufactures and markets a comprehensive range of supports for the prevention and treatment of pressure ulcers. The company is active in the markets for both static and dynamic supports and offers an extensive range of mattresses, cushions and positioning accessories using foam, pneumatic cells, and alternating pressure.

For further information, please go to: www.askle.com

ATA Climatisation

ATA specialises in the air treatment of operating theatres and sensitive areas of hospitals. ATA develops and supplies innovative technical solutions that are specifically designed to meet the requirements of each client, in order to help fight cross-contamination and conform to increasingly stringent air-quality standards.
For further information, please go to: www.ataclimatisation.com

Dieau Edafim
Dieau Edafim has developed a new technology to ensure the perfect microbiological safety of water in point-of-use (POU) coolers. This innovative process eliminates pathogenic bacteria from drinking water without using any filters, chemical products or consumables. The technology has been developed for hospitals, care homes and other sensitive locations.

For further information, please go to: www.dieau-edafim.com

FB Medical

FB Medical specialises in disposable medical devices for vascular access. Since 1990, the company has been supplying therapeutic solutions for vascular surgery, oncology and digestive surgery. Its products are currently distributed in 30 countries worldwide and conform to the requirements of the 93/42/CEE European Directive. The company is also ISO 9001 – ISO 13485-certified.

For further information, please go to: www.fbmedical.fr

Felt

Felt is a leading supplier of wet wipes and other hygiene products. The company manufactures under its own brand names (Aseptonet and Hygie'Net), as well as under private label. Felt offers products that include hand gels, wipes in canisters, flow packs, refills, sprays, jugs, bed baths and wet mitts for use in disinfection, incontinence/body wash, professional cleaning and cosmetics.

For further information, please go to: www.felt.fr

FIM Medical

FIM Medical is an innovative designer and manufacturer of medical devices for preventive medicine. FIM is now launching its products on the British market, including vision testers, audiometers, spirometers and filters. The company is currently looking for a British distributor for its state-of-the-art vision tester and audiometer.

For further information, please go to: www.fim-medical.com

Gyneas

Gyneas Laboratories specialises in obstetrics and gynaecology, providing a wide range of products to both hospitals/clinics and distributors. The company has an annual growth rate of 30% in France, with a rise of 10% in export sales. Gyneas’ range of products includes the icup, a single-use sterile vacuum extractor which ensures greater safety for mother and baby.

For further information, please go to: www.gyneas.com

Segetex

Segetex is a manufacturer and distributor of non-woven disposable products for hospitals, including high-quality products for patient comfort and hygiene; products offering protection in operating theatres; and single-use bedding for emergency services and dialysis. The company invests significantly in R&D to develop new materials and products.

For further information, please go to: www.segetex.com

SuperSonic Imagine

SuperSonic Imagine has developed the Aixplorer®, an innovative ultrasound system with an entirely software-based architecture known as SonicSoftware™, which allows for great speed, accuracy and flexibility. SonicSoftware™ supports MultiWave™ Technology, which uses two waves to better characterise tissue.

For further information, please go to: www.supersonicimagine.fr

Sterlab

Sterlab specialises in medical devices for hospital sterilisation procedures. The company’s Wi Scan System® is a routine loaded electronic probe in a sterilisation package, which transfers data acquired during the sterilisation cycle and allows immediate and user-friendly reading and archiving. An electronic Bowie and Dick test uses the same reader and software.

For more information: www.sterlab.com

About the French Trade Commission

The Trade Commission of the French Embassy in London promotes trade development between France and the UK by offering a range of services to French companies. The Healthcare and Biotechnology Department organises B2B events in the form of conferences and networking opportunities, mainly in London.

The French Healthcare Equipment Event will take place at the Sofitel St James hotel in London on 7 July 2010. British distributors are invited to attend a networking lunch and B2B meetings with French companies from 12.30pm.

For further information, you can get directly in contact with Ms Arkle at the French Trade Commission (see below).

Ms Judith Arkle
Senior Trade Adviser
Healthcare and Biotechnology Department
French Trade Commission UBIFRANCE in London
Email: judith.arkle@ubifrance.fr
Tel: +44 (0)20 7024 3619 (direct line)

Kate Ambler | UBIFRANCE
Further information:
http://www.ubifrance.com/uk

Further reports about: Biotechnology Healthcare Medical Wellness UBIFRANCE medical devices

More articles from Trade Fair News:

nachricht Fraunhofer HHI at Mobile World Congress with VR and 5G technologies
24.02.2017 | Fraunhofer-Institut für Nachrichtentechnik, Heinrich-Hertz-Institut, HHI

nachricht MWC 2017: 5G Capital Berlin
24.02.2017 | FOKUS - Fraunhofer-Institut für Offene Kommunikationssysteme

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Safe glide at total engine failure with ELA-inside

27.02.2017 | Information Technology

Fraunhofer IFAM expands its R&D work on Coatings for protection against corrosion and marine growth

27.02.2017 | Materials Sciences

Stingless bees have their nests protected by soldiers

24.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>