Complete range of low-voltage motors from Siemens for flexible deployment

Because the modular concept enables users to choose for example between air cooling and water cooling or between self-ventilation and forced ventilation, the Simotics FD motors can be adapted to suit extremely diverse applications.

  • Full range of Simotics FD motors in the output range from 200 to 1,600 kilowatts
  • Modular concept for high flexibility and optimum adaptation to individual applications
  • Integrated Drive System (IDS) comprising Simotics FD motor and Sinamics frequency converter meets the requirements of the IES2 system efficiency class

Siemens has completed its spectrum of Simotics FD low-voltage motors. The new motors, covering the output range from 200 to 1,600 kilowatts and with shaft heights ranging between 315 and 450 millimeters, are optimized for converter operation and are particularly energy efficient, especially in the partial load range.

In combination with Sinamics low-voltage converters, they form an Integrated Drive System (IDS) that meets the requirements of the IES2 system efficiency class. Compared to the reference system of the standard, this means that losses are reduced by 35 percent.

The modular structure provides customers with maximum flexibility, allowing them to choose for example between air cooling and water cooling or between self-ventilation and forced ventilation. Service concepts such as predictive condition monitoring round off the portfolio.

The Simotics FD motors are ideally suited for use with Sinamics low-voltage converters and, as part of an IDS, offer a cost-effective, energy-efficient complete system that generates very little noise.

In combination with the Sinamics low-voltage converters, the drive train meets the requirements of the IES2 system efficiency class. If the entire drive system is water-cooled, heat recovery can be used to boost efficiency even further. Because the power density of the water-cooled motors is up to 30% higher, they are extremely compact.

The terminal box can be rotated in steps of 90 degrees, is diagonally divided and has a large format, making it particularly easy to connect. Comprehensive service, ranging from online condition monitoring and repair right through to retrofitting, is ensured via the global service network. The innovative and compact new motor design is compatible with the Simotics TN series N-compact. It has no need for external cooling ribs; these are integrated directly in the stator core in the rectangular gray cast-iron enclosure, enabling cooling to take place in the enclosure close to the heat source.

The Sinamics G120P converter and Simotics FD motor combination has been designed specifically for pump-and-fan applications, where it performs particularly well. Simotics FD motors are now used widely across all sectors, including plastics, cement, mining, steel, marine, paper, crane, water/wastewater and chemical. Thanks to the latest addition, they now cover the entire output range.

For further information on Simotics FD, visit www.siemens.com/simotics-fd

Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for more than 165 years. The company is active in more than 200 countries, focusing on the areas of electrification, automation and digitalization. One of the world's largest producers of energy-efficient, resource-saving technologies, Siemens is No. 1 in offshore wind turbine construction, a leading supplier of combined cycle turbines for power generation, a major provider of power transmission solutions and a pioneer in infrastructure solutions as well as automation, drive and software solutions for industry. The company is also a leading provider of medical imaging equipment – such as computed tomography and magnetic resonance imaging systems – and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2014, which ended on September 30, 2014, Siemens generated revenue from continuing operations of €71.9 billion and net income of €5.5 billion. At the end of September 2014, the company had around 357,000 employees worldwide. Further information is available on the Internet at www.siemens.com

Reference Number: PR2015020118PDEN

Contact
Mr. Stefan Rauscher
Process Industries and Drives Division
Siemens AG

Gleiwitzer Str. 555

90475 Nuremberg

Germany

Tel: +49 (911) 895-7952

Stefan.Rauscher​@siemens.com

Media Contact

Stefan Rauscher Siemens Process Industries and Drives

All latest news from the category: Trade Fair News

Back to home

Comments (0)

Write a comment

Newest articles

Lighting up the future

New multidisciplinary research from the University of St Andrews could lead to more efficient televisions, computer screens and lighting. Researchers at the Organic Semiconductor Centre in the School of Physics and…

Researchers crack sugarcane’s complex genetic code

Sweet success: Scientists created a highly accurate reference genome for one of the most important modern crops and found a rare example of how genes confer disease resistance in plants….

Evolution of the most powerful ocean current on Earth

The Antarctic Circumpolar Current plays an important part in global overturning circulation, the exchange of heat and CO2 between the ocean and atmosphere, and the stability of Antarctica’s ice sheets….

Partners & Sponsors