Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

CabinExpAir goes to Hamburg for Aircraft Interiors

05.05.2010
CabinExpAir, a specialist in the refurbishment of cabins of commercial aircraft, will be exhibiting on the French Pavilion at the Aircraft Interiors trade show in Hamburg, which will be held from 18 to 20 May 2010. As part of its integrated approach to cabin improvement, CabinExpAir mainly specialises in the refurbishment of passenger seats.

Gilles Morin, CabinExpAir chairman, says, "There has been a growing fragmentation of responsibilities between the various participants involved in aircraft cabins, including seat manufacturers, electronics companies and cabin integrators. CabinExpAir's goal is to control the entire value chain from design through to installation, not forgetting maintenance. To do so, we are working on a large number of projects in the aircraft cabin market and are actively positioning ourselves as cabin architects.”

As part of the French Pavilion at Aircraft Interiors, CabinExpair will be presenting its integrated approach to seat refurbishment at the trade show, which will take place in Hamburg (Germany) in May 2010. By providing standard subassemblies, which can be adapted to various seats available on the market, the company has developed a new type of seat that is lighter and less expensive.

CabinExpAir offers airline companies a complete renovation of aircraft cabins, incorporating the latest technological innovations, while staying within investment budgets and compressing operating costs. Based on technical specifications, which can be drawn up together with the airline if required, CabinExpAir works on the ‘design-to-cost’ of the cabin architecture.

The key objective is to improve the services and comfort level offered to passengers and to facilitate and optimise the work of the cabin crew. This also enables the airline to carefully manage investment costs and reduce its operating budgets. To achieve this, CabinExpAir offers an innovative, modular and integrated cabin concept.

By developing standardised and pre-certified modules that can be adapted to meet the needs of different airlines, CabinExpAir helps them to optimise planning and retrofit costs by avoiding specific design constraints. CabinExpAir is also introducing innovative new features in the field of aircraft seating, aimed at facilitating the work of cabin crews, offering better services to passengers and improving equipment maintenance.

About CabinExpAir

CabinExpAir, which is headquartered in Châteauroux (in central France), specialises in the refurbishment of the cabins of commercial aircraft. The company offers a full range of products and services, as well as expertise in aircraft cabin project management.

CabinExpAir was founded by Gilles Morin, who had previously worked for leading aerospace companies, including Precilec and SICMA, which are both part of the Zodiac Aerospace Group.

CabinExpAir will be part of the French Pavilion at Aircraft Interiors, which will take place in Hamburg (in Northern Germany) from 18 to 20 May 2010 (Stand 6B56-E – Hall B6).

For further information, please go to: www.cabinexpair.com

Kate Ambler | UBIFRANCE
Further information:
http://www.ftpb.co.uk
http://www.ubifrance.fr

Further reports about: Aircraft Aircraft Interiors CabinExpAir aircraft cabins

More articles from Trade Fair News:

nachricht Fraunhofer HHI with latest VR technologies at NAB in Las Vegas
24.04.2017 | Fraunhofer-Institut für Nachrichtentechnik, Heinrich-Hertz-Institut, HHI

nachricht Kiel nano research at the Hannover Messe
21.04.2017 | Christian-Albrechts-Universität zu Kiel

All articles from Trade Fair News >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Making lightweight construction suitable for series production

More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.

Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...

Im Focus: Wonder material? Novel nanotube structure strengthens thin films for flexible electronics

Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.

"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...

Im Focus: Deep inside Galaxy M87

The nearby, giant radio galaxy M87 hosts a supermassive black hole (BH) and is well-known for its bright jet dominating the spectrum over ten orders of magnitude in frequency. Due to its proximity, jet prominence, and the large black hole mass, M87 is the best laboratory for investigating the formation, acceleration, and collimation of relativistic jets. A research team led by Silke Britzen from the Max Planck Institute for Radio Astronomy in Bonn, Germany, has found strong indication for turbulent processes connecting the accretion disk and the jet of that galaxy providing insights into the longstanding problem of the origin of astrophysical jets.

Supermassive black holes form some of the most enigmatic phenomena in astrophysics. Their enormous energy output is supposed to be generated by the...

Im Focus: A Quantum Low Pass for Photons

Physicists in Garching observe novel quantum effect that limits the number of emitted photons.

The probability to find a certain number of photons inside a laser pulse usually corresponds to a classical distribution of independent events, the so-called...

Im Focus: Microprocessors based on a layer of just three atoms

Microprocessors based on atomically thin materials hold the promise of the evolution of traditional processors as well as new applications in the field of flexible electronics. Now, a TU Wien research team led by Thomas Müller has made a breakthrough in this field as part of an ongoing research project.

Two-dimensional materials, or 2D materials for short, are extremely versatile, although – or often more precisely because – they are made up of just one or a...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Expert meeting “Health Business Connect” will connect international medical technology companies

20.04.2017 | Event News

Wenn der Computer das Gehirn austrickst

18.04.2017 | Event News

7th International Conference on Crystalline Silicon Photovoltaics in Freiburg on April 3-5, 2017

03.04.2017 | Event News

 
Latest News

NASA's Fermi catches gamma-ray flashes from tropical storms

25.04.2017 | Physics and Astronomy

Researchers invent process to make sustainable rubber, plastics

25.04.2017 | Materials Sciences

Transfecting cells gently – the LZH presents a GNOME prototype at the Labvolution 2017

25.04.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>