Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


RODental - Removable adhesion material for dental applications

RODental is a dentistry cement containing encapsulated phase-change material. This novel type of cement allows a removal of permanent and provisionally fixed dental restorations when needed (remove on demand) – without destroying or damaging these. Because properties of RODental can be triggered by temperature, all ceramic restorations, e. g. crowns, brackets or bridges on implants or teeth, can be mechanically removed in an easy way.

Challenge: Mainly there are three applications, for which new adhesive material is required: 1. Until today, dental cement used to cement fixed restorations on teeth or implants is optimized for permanent fixation. In case of clinical or technical complications, e. g. screw loosening on implants, parodontitis or ceramic chipping, a necessary removal of the restoration leads to destruction or damage. Re-use of the restoration is rarely possible, thus removing so far regularly requires a new preparation, combined with additional expenses. 2. In case of provisional fixation of long time provisional restorations stability over a certain period of time is a desirable feature. Cements currently available are not stable over time. Restorations may fall off at any time and may even be aspirated or swallowed by the patient. 3. To date orthodontic brackets have to be removed with special nippers and the adhesive cement remaining on the tooth structure has to be removed with diamond or hard metal burs. This procedure is time consuming. In addition it bears the risk of damaging the tooth structure.

Further Information: PDF

PROvendis GmbH
Phone: +49 (0)208/94105 10

Dipl.-Ing. Alfred Schillert | TechnologieAllianz e.V.
Further information:

All articles from Technology Offerings >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New 3-D wiring technique brings scalable quantum computers closer to reality

Researchers from the Institute for Quantum Computing (IQC) at the University of Waterloo led the development of a new extensible wiring technique capable of controlling superconducting quantum bits, representing a significant step towards to the realization of a scalable quantum computer.

"The quantum socket is a wiring method that uses three-dimensional wires based on spring-loaded pins to address individual qubits," said Jeremy Béjanin, a PhD...

Im Focus: Scientists develop a semiconductor nanocomposite material that moves in response to light

In a paper in Scientific Reports, a research team at Worcester Polytechnic Institute describes a novel light-activated phenomenon that could become the basis for applications as diverse as microscopic robotic grippers and more efficient solar cells.

A research team at Worcester Polytechnic Institute (WPI) has developed a revolutionary, light-activated semiconductor nanocomposite material that can be used...

Im Focus: Diamonds aren't forever: Sandia, Harvard team create first quantum computer bridge

By forcefully embedding two silicon atoms in a diamond matrix, Sandia researchers have demonstrated for the first time on a single chip all the components needed to create a quantum bridge to link quantum computers together.

"People have already built small quantum computers," says Sandia researcher Ryan Camacho. "Maybe the first useful one won't be a single giant quantum computer...

Im Focus: New Products - Highlights of COMPAMED 2016

COMPAMED has become the leading international marketplace for suppliers of medical manufacturing. The trade fair, which takes place every November and is co-located to MEDICA in Dusseldorf, has been steadily growing over the past years and shows that medical technology remains a rapidly growing market.

In 2016, the joint pavilion by the IVAM Microtechnology Network, the Product Market “High-tech for Medical Devices”, will be located in Hall 8a again and will...

Im Focus: Ultra-thin ferroelectric material for next-generation electronics

'Ferroelectric' materials can switch between different states of electrical polarization in response to an external electric field. This flexibility means they show promise for many applications, for example in electronic devices and computer memory. Current ferroelectric materials are highly valued for their thermal and chemical stability and rapid electro-mechanical responses, but creating a material that is scalable down to the tiny sizes needed for technologies like silicon-based semiconductors (Si-based CMOS) has proven challenging.

Now, Hiroshi Funakubo and co-workers at the Tokyo Institute of Technology, in collaboration with researchers across Japan, have conducted experiments to...

All Focus news of the innovation-report >>>



Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

Agricultural Trade Developments and Potentials in Central Asia and the South Caucasus

14.10.2016 | Event News

World Health Summit – Day Three: A Call to Action

12.10.2016 | Event News

Latest News

Resolving the mystery of preeclampsia

21.10.2016 | Health and Medicine

Stanford researchers create new special-purpose computer that may someday save us billions

21.10.2016 | Information Technology

From ancient fossils to future cars

21.10.2016 | Materials Sciences

More VideoLinks >>>