describes a preparation of moderately volatile organic explosives (e.g. TATP) in a fluid matrix. This solvent is chemically inert and olefactorically neutral. In particular peroxide explosives with high sensitivity to friction, impact and electrostatic discharge can be handled safely this way. The explosive material can evaporate from the matrix. Therefore, the preparation is a safe scent source of authentic substance.
Authentic substance testing agents available on the market for this class of substance so far are bonded to solid support materials and only have a low capacity. As a liquid testing agent, an FMED can be dosed and applied as required. The high capacity also allows scent traces to be provided over a longer period and large amounts of explosive material to be simulated.
Further Information: PDF
Phone: +49 (0)208/94105 10
Dipl.-Ing. Alfred Schillert
firstname.lastname@example.org | TechnologieAllianz e.V.
Quat primer polymers the universal key to permanent surface functionalization
27.02.2017 | TechnologieAllianz e.V.
Novel carbonization process of PAN-nanofiber mats with enhanced surface area and porosity
20.02.2017 | TechnologieAllianz e.V.
On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.
On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...
In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport
Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...
The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.
The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...
Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...
13.02.2017 | Event News
10.02.2017 | Event News
09.02.2017 | Event News
27.02.2017 | Materials Sciences
27.02.2017 | Interdisciplinary Research
27.02.2017 | Life Sciences