Is your cable television on the fritz? One explanation, scientists suspect, may be the weather — the weather in space, that is.
MIT researchers are investigating the effects of space weather — such as solar flares, geomagnetic storms and other forms of electromagnetic radiation — on geostationary satellites, which provide much of the world's access to cable television, Internet services and global communications.
Geostationary satellites orbit at the same rate as the Earth's rotation, essentially remaining above the same location throughout their lifetimes. These satellites are designed to last up to 15 years, during which time they may be bombarded by charged particles. Most satellites cover sensitive electronics with layers of protective shielding, but over time, radiation can penetrate and degrade a satellite's components and performance.
"If we can understand how the environment affects these satellites, and we can design to improve the satellites to be more tolerant, then it would be very beneficial not just in cost, but also in efficiency," says Whitney Lohmeyer, a graduate student in MIT's Department of Aeronautics and Astronautics.
Lohmeyer is working with Kerri Cahoy, an assistant professor of aeronautics and astronautics, to understand how sensitive components are to the weather conditions in space, and how space weather may contribute to failures.
In a paper published in the journal Space Weather, the team analyzed space weather conditions at the time of 26 failures in eight geostationary satellites over 16 years of operation. The researchers found that most of the failures occurred at times of high-energy electron activity during declining phases of the solar cycle. This particle flux, the scientists theorize, may have accumulated in the satellites over time, creating internal charging that damaged their amplifiers — key components responsible for strengthening and relaying a signal back to Earth.
Lohmeyer says a better understanding of space weather's effects on satellites is needed not just for current fleets, but also for the next generation of communications satellites.
"Users are starting to demand more capabilities," Lohmeyer notes. "They want to start video-streaming data, they want to communicate faster with higher data rates. So design is changing — along with susceptibilities to space weather and radiation that didn't used to exist, but are now becoming a problem."
Today, engineers design satellites with space weather in mind, using radiation models to predict how much radiation a satellite may be exposed to over its lifetime. Cahoy notes that a satellite's radiation exposure may vary depending on its orbit. For instance, some orbits are more dangerous than others; engineers choose components that can survive and operate in such environments.
"But space weather is a lot more dynamic than models predict, and there are many different ways that charged particles can wreak havoc on your satellite's electronics," Cahoy adds. "The hard part about satellites is that when something goes wrong, you don't get it back to do analysis and figure out what happened."
To add another layer of complication, Lohmeyer points out a "disconnect" between satellite engineers and space-weather forecasters.
"The space-weather community provides forecasting mechanisms for companies to help them better operate their satellites, and they may say, 'Space-weather activity is incredibly high right now, we're putting out a warning,'" Lohmeyer says. "But engineers and operators don't really understand what this implies."
Lohmeyer's primary goal, she says, is to bridge the gap between the space-weather community and satellite engineers.
Reading the space forecast
To establish a better understanding of space weather's effects on satellite equipment, Cahoy and Lohmeyer partnered with Inmarsat, a telecommunications company based in London. The researchers analyzed more than 665,000 operational hours of telemetry data from eight of the company's satellites, including temperature and electric-current measurements from the satellites' solid-state amplifiers. From these data, the researchers analyzed scientific space-weather data coinciding with 26 anomalies from 1996 to 2012, the majority of which were considered "hard failures" — unrecoverable failures that may lead to a temporary shutdown of the spacecraft.
The team noted the dates and times of each failure, and then analyzed the weather conditions leading up to each failure, using observations from multiple space-weather satellites. Such observations included solar-flare activity and geomagnetic storms.
Specifically, the researchers analyzed the Kp index, a measurement of geomagnetic activity that is represented along a scale from zero to nine. Satellite engineers incorporate the Kp index into radiation models to anticipate space conditions for a particular spacecraft's orbit. However, as the team found, most of the amplifier failures occurred during times of low geomagnetic activity, with a Kp index of three or less — a measurement that engineers would normally consider safe. The finding suggests that the Kp index may not be the most reliable metric for radiation exposure.
Instead, Cahoy and Lohmeyer discovered that many amplifiers broke down during times of high-energy electron activity, a phenomenon that occurs during the solar cycle, in which the sun's activity fluctuates over an 11-year period. The flux of high-energy electrons is highest during the declining phase of the solar cycle — a period during which most amplifier failures occurred.
Lohmeyer says that over time, such high-energy electron activity may penetrate and accumulate inside a satellite, causing internal charging that damages amplifiers and other electronics. While most satellites carry back-up amplifiers, she notes that over an extended mission, these amplifiers may also fail.
"Once you get into a 15-year mission, you may run out of redundant amplifiers," Lohmeyer says. "If a company has invested over $200 million in a satellite, they need to be able to assure that it works for that period of time. We really need to improve our method of quantifying and understanding the space environment, so we can better improve design."
Written by Jennifer Chu, MIT News Office
Andrew Carleen | Source: EurekAlert!
Further information: www.mit.edu
More articles from Studies and Analyses:
Study uncovers new evidence for assessing tsunami risk from very large volcanic island landslides
11.12.2013 | National Oceanography Centre
Money may corrupt, but thinking about time can strengthen morality
11.12.2013 | Association for Psychological Science
The molecular architecture of three key proteins and their complexes reveals how plants fine-tune their immune response to pathogens
Plants rarely get sick in their natural environment. When the threat of infection arises, a quick decision is made about the necessary countermeasures. The course is set by a protein which forms complexes with its partner proteins for this purpose.
Jane Parker from the Max Planck Institute for Plant Breeding ...
Researchers studying speciation of butterfly orchids on the Azores have been startled to discover that the answer to a long-debated question "Do the islands support one species or two species?" is actually "three species".
Hochstetter's Butterfly-orchid, newly recognized following application of a battery of scientific techniques and reveling in a complex taxonomic history worthy of Sherlock Holmes, is arguably Europe's rarest orchid species. Under threat in its mountain-top retreat, the orchid urgently requires conservation recognition.
A lavishly illustrated publication, titled "Systematic revision of Platanthera in ...
Researchers from Brown University and the University of Hawaii have found some mineralogical surprises in the Moon's largest impact crater.
Data from the Moon Mineralogy Mapper that flew aboard India's Chandrayaan-1 lunar orbiter shows a diverse mineralogy in the subsurface of the giant South Pole Aitken basin.
The differing mineral signatures could be reflective of the minerals dredged up at the time of the giant impact 4 billion years ago, ...
In power electronics systems bonded connections create the central electrical connections between adjoining surfaces.
The quality of these bonded connections is one of the main factors that determines the reliability and availability of drive systems in electric vehicles, and hence constitutes a major design challenge for German auto manufacturers aiming to electrify their vehicles.
Now the partners participating in the RoBE (Robust Bonds in ...
International team of scientists develops new feedback method for optimizing the laser pulse shapes used in the control of chemical reactions
In many ways, traditional chemical synthesis is similar to cooking. To alter the final product, you can change the ingredients or their ratio, change the method of mixing ingredients, or change the temperature or pressure of the environment of the ingredients.
Like an accomplished chef, chemists have become very skilled ...
11.12.2013 | Information Technology
11.12.2013 | Life Sciences
11.12.2013 | Agricultural and Forestry Science
11.12.2013 | Event News
10.12.2013 | Event News
05.12.2013 | Event News