Cladding gold contacts with a laser

Gold contact spots on a snap dome.<br>Source: INOVAN<br>

Electroplating is the conventional method used for this purpose, but scientists have now developed a novel laser-based method which involves laser cladding gold contact spots instead of applying the gold in a thin layer on the whole surface. This new technique is fast and offers the potential to cut up to 90 percent of the amount of gold used.

Keys and keyboards have become a common sight in today’s world, both in our personal lives (cars, phones, computers) and in industrial settings. Users expect keys to operate with 100 percent reliability regardless of how many times they are pressed. At the same time, manufacturers are seeking cheaper production methods and new ways of making more efficient use of expensive, high-quality materials.

The Fraunhofer Institute for Laser Technology ILT in Aachen has developed a method of producing keys on an industrial scale which fulfills both these requirements. Within the scope of the Mifulas 2 project funded by Germany’s Federal Ministry of Education and Research (BMBF), researchers at Fraunhofer ILT – working in collaboration with their project partner INOVAN – have been drawing on their experience in laser cladding to replace the electroplated gold layers on switch contacts known as ‘snap domes’ with small welded gold spots.

Snap domes comprise small contact springs which are used to make electrical contact and provide tactile feedback in a wide range of keyboard designs. They generally consist of high-quality spring steel which is typically gold-plated or modified in some other way in order to achieve better contact and more reliable switching. As well as having low contact resistance, gold also boasts outstanding resistance to corrosion.

The new method replaces the conventional large gold surfaces with small contact spots which are cladded by a fiber laser. Using gold powder with grain diameters smaller than 10 µm, the fiber laser takes advantage of its beam diameter of less than 100 µm to create contact spots with a diameter and height of less than 100 µm. This micro laser cladding uses a nozzle to feed the gold powder into the interaction zone of the laser beam and the substrate material (e.g. stainless steel, nickel alloy). The laser energy melts both the gold powder and a thin surface layer of the substrate to create a welded spot which is metallurgical bonded to the substrate.

Significant reduction in material consumption

One of the biggest advantages of this new method is its material efficiency. To replace the thin gold layer deposited on snap domes by conventional methods, you need just five selectively welded gold contact spots – and initial calculations suggest that this slashes the amount of material required to make the gold contact by between 50 and 90 percent. Preliminary tests carried out by INOVAN comprising 100,000 switching operations demonstrate that this new approach does not measurably affect switch service life. In addition, the electrical properties of the gold contact spots correspond to the results obtained from electroplating.

Integrated production

The laser-based method also makes it possible to integrate the fabrication of the gold contact spots into the production of the switch components themselves. This enables rolls of material to be processed and facilitates the efficient production of short run batches and prototypes. Cladding a single point takes approximately 50 milliseconds. Researchers are currently investigating how to accelerate the process; experts consider that it should be possible to weld 20 contact spots simultaneously in the future by splitting the laser beam.

Using laser cladding to produce contacts from precious metals is a method that, in principle, is suitable for all metal parts which currently rely on plating techniques to make electrical contacts. Examples include the switches used in cell phones as well as bipolar plates for fuel cells.

Your contacts at Fraunhofer ILT
Our experts are on hand to answer your questions:
Dipl.-Phys. Matthias Belting
Coatings and Heat Treatment Group
Phone +49 241 8906-624
matthias.belting@ilt.fraunhofer.de
Dr. Andreas Weisheit
Head of Coatings and Heat Treatment Group
Phone +49 241 8906-403
andreas.weisheit@ilt.fraunhofer.de
Fraunhofer Institute for Laser Technology ILT
Steinbachstrasse 15
52074 Aachen
Phone +49 241 8906-0
Fax +49 241 8906-121

Media Contact

Axel Bauer Fraunhofer-Institut

More Information:

http://www.ilt.fraunhofer.de

All latest news from the category: Process Engineering

This special field revolves around processes for modifying material properties (milling, cooling), composition (filtration, distillation) and type (oxidation, hydration).

Valuable information is available on a broad range of technologies including material separation, laser processes, measuring techniques and robot engineering in addition to testing methods and coating and materials analysis processes.

Back to home

Comments (0)

Write a comment

Newest articles

Lighting up the future

New multidisciplinary research from the University of St Andrews could lead to more efficient televisions, computer screens and lighting. Researchers at the Organic Semiconductor Centre in the School of Physics and…

Researchers crack sugarcane’s complex genetic code

Sweet success: Scientists created a highly accurate reference genome for one of the most important modern crops and found a rare example of how genes confer disease resistance in plants….

Evolution of the most powerful ocean current on Earth

The Antarctic Circumpolar Current plays an important part in global overturning circulation, the exchange of heat and CO2 between the ocean and atmosphere, and the stability of Antarctica’s ice sheets….

Partners & Sponsors