Working with Louisiana Tech University assistant professor Long Que, UT Arlington associate physics professor Wei Chen and graduate students Santana Bala Lakshmanan and Chang Yang synthesized a combination of copper sulfide nanoparticles and single-walled carbon nanotubes.
The team used the nanomaterial to build a prototype thermoelectric generator that they hope can eventually produce milliwatts of power. Paired with microchips, the technology could be used in devices such as self-powering sensors, low-power electronic devices and implantable biomedical micro-devices, Chen said.
“If we can convert both light and heat to electricity, the potential is huge for energy production,” Chen said. “By increasing the number of the micro-devices on a chip, this technology might offer a new and efficient platform to complement or even replace current solar cell technology.”
In lab tests, the new thin-film structure showed increases by as much at 80 percent in light absorption when compared to single-walled nanotube thin-film devices alone, making it a more efficient generator.
Copper sulfide is also less expensive and more environment-friendly than the noble metals used in similar hybrids.
In October, the journal Nanotechnology published a paper on the work called “Optical thermal response of single-walled carbon nanotube-copper sulfide nanoparticle hybrid nanomaterials.” In it, researchers also say also found that they could enhance the thermal and optical switching effects of the hybrid nanomaterial as much as ten times by using asymmetric illumination, rather than symmetric illumination.
Coauthors on the Nanotechnology paper from Louisiana Tech include Yi-Hsuan Tseng, Yuan He and Que, all of the school’s Institute for Micromanufacturing.
“Dr. Chen’s research with nanomaterials is an important advancement with the potential for far-reaching applications,” said Pamela Jansma, dean of the UT Arlington College of Science. “This is the kind of work that demonstrates the value of a research university in North Texas and beyond.”
Chen is currently receiving funding from the U.S. Department of Defense to develop nanoparticle self-lighting photodynamic therapy for use against breast and prostate cancers. In 2010, he was the first to publish results in the journal Nanomedicine demonstrating that near infrared light could be used to heat copper sulfide nanoparticles for photothermal therapy in cancer treatment, which destroys cancer cells with heat between 41 and 45 degrees Celsius.
Next month, the Journal of Biomedical Nanotechnology will publish Chen’s work successfully coupling gold nanoparticles with the copper sulfide nanoparticles for the photothermal therapy. Such a material would be less costly and potentially more effective than using gold particles alone, Chen said. The new paper is called “Local field enhanced Au/CuS nanocomposites as efficient photothermal transducer agents for cancer treatment.”
Chen is also leading a UT Arlington team exploring ways to develop various nanoparticles for radiation detection. That work is funded by a $1.3 million grant from the National Science Foundation and the U.S. Department of Homeland Security.
The study of nanoparticles and their potential beyond the lab is an important part of the work going on at UT Arlington, a comprehensive research institution of more than 33,200 students and more than 2,200 faculty members in the heart of North Texas. Visit www.uta.edu to learn more.
The University of Texas at Arlington is an Equal Opportunity and Affirmative Action employer.
Traci Peterson | Source: EurekAlert!
Further information: www.uta.edu
Further Reports about: asymmetric illumination > gold nanoparticle > gold nanoparticles > Nanomedicine > nanoparticle self-lighting photodynamic therapy > Nanotechnology > Optical thermal response > prostate cancer > Science TV > similar hybrids > single-walled carbon nanotube > symmetric illumination
More articles from Physics and Astronomy:
CU-Boulder scientist: 2012 solar storm points up need for society to prepare
10.12.2013 | University of Colorado at Boulder
3D printing used as a tool to explain theoretical physics
09.12.2013 | Institute of Physics
Researchers from Brown University and the University of Hawaii have found some mineralogical surprises in the Moon's largest impact crater.
Data from the Moon Mineralogy Mapper that flew aboard India's Chandrayaan-1 lunar orbiter shows a diverse mineralogy in the subsurface of the giant South Pole Aitken basin.
The differing mineral signatures could be reflective of the minerals dredged up at the time of the giant impact 4 billion years ago, ...
In power electronics systems bonded connections create the central electrical connections between adjoining surfaces.
The quality of these bonded connections is one of the main factors that determines the reliability and availability of drive systems in electric vehicles, and hence constitutes a major design challenge for German auto manufacturers aiming to electrify their vehicles.
Now the partners participating in the RoBE (Robust Bonds in ...
International team of scientists develops new feedback method for optimizing the laser pulse shapes used in the control of chemical reactions
In many ways, traditional chemical synthesis is similar to cooking. To alter the final product, you can change the ingredients or their ratio, change the method of mixing ingredients, or change the temperature or pressure of the environment of the ingredients.
Like an accomplished chef, chemists have become very skilled ...
A genetic defect protects mice from infection with influenza viruses
A new study published in the scientific journal PLOS Pathogens points out that mice lacking a protein called Tmprss2 are no longer affected by certain flu viruses.
The discovery was made by researchers from the Helmholtz Centre for Infection Research (HZI) in Braunschweig in collaboration with colleagues from Göttingen and ...
The Light: Global study gets underway with online user survey
Light has a fundamental impact on our sense of well-being and performance. In cooperation with Zumtobel, a supplier of lighting solutions, Fraunhofer IAO has launched a global user survey of lighting quality in offices. The objective is to identify the best lighting conditions for a variety of spaces and lighting ...
10.12.2013 | Physics and Astronomy
10.12.2013 | Agricultural and Forestry Science
10.12.2013 | Power and Electrical Engineering
10.12.2013 | Event News
05.12.2013 | Event News
04.12.2013 | Event News