When a bubble of air rising through water hits a sheet of glass, it doesn’t simply stop — it squishes, rebounds, and rises again, before slowly moving to the barrier. This seemingly simple process actually involves some knotty fluid mechanics. An international research team, including researchers at the A*STAR Institute of High Performance Computing, and Nanyang Technological University, Singapore, has now unpicked this physical process.
The researchers used a fine capillary to blow air bubbles 0.5 to 1.5 millimeters wide into a glass of de-ionized water. The bubbles rose 5 millimeters before hitting a glass cover, all under the watchful eye of a high-speed camera. Meanwhile, a laser beam shining from above illuminated the contact points between glass, water and the bubble, created a changing interference pattern that was captured by a second camera running at up to 54,000 frames per second.
A bubble typically took about 17 milliseconds to impact, bounce and return to the glass slide. But a film of water remained between them; it took a further 250 milliseconds for that to drain away before the bubble’s air came into direct contact with the glass. “The film drains slowly because the process is controlled by viscosity and surface tension,” says team member Rogerio Manica. “Eventually, this layer breaks and a three-phase contact line — water, glass and air — forms, with a region on the glass surface that is not wet.” This ‘dewetting’ stage is about 100 times faster than the film drainage process.
The researchers found that a simple mathematical model, called lubrication theory, could accurately describe the film drainage measured in the experiments. “We thus understand the fluid mechanics now in very great detail,” says Manica. “Many industrially relevant processes use impacting bubbles, including wastewater cleaning and mineral extraction,” he says, adding that simulations of these processes can now be improved by incorporating the team’s bubble model.
Other researchers had studied the behavior of much smaller bubbles when rising at very slow speeds. They found that the bubbles settled on to the cover without bouncing, thus skipping the most complex parts of the process.
Manica notes that their experiments also demonstrated the utility of synchronizing cameras to study two very different length scales — the side view is measured in millimeters, while the interferometry camera captures features thousands of times smaller. The researchers are now investigating how rising bubbles behave if the water contains small amounts of other materials, such as surfactants.
The A*STAR-affiliated researchers contributing to this research are from the Institute of High Performance Computing
Hendrix, M. H. W., Manica, R., Klaseboer, E., Chan, D. Y. C. & Ohl, C.-D. Spatiotemporal evolution of thin liquid films during impact of water bubbles on glass on a micrometer to nanometer scale. Physical Review Letters 108, 247803 (2012).
More articles from Physics and Astronomy:
Two Galaxies for the Price of One
03.12.2013 | Max-Planck-Institut für Radioastronomie, Bonn
ISON stops producing dust
02.12.2013 | Max Planck Institute for Solar System Research, Katlenburg-Lindau
NASA's Hurricane and Severe Storms Sentinel airborne mission known as HS3 wrapped up for the 2013 Atlantic Ocean hurricane season at the end of September, and had several highlights. HS3 will return to NASA’s Wallops Flight Facility in Wallops Island, Va., for the 2014 Atlantic hurricane season.
During the 2013 mission, two unmanned Global Hawks flew from Wallops for the first time. The mission highlights included studying the Saharan Air Layer, following the genesis of a tropical storm, finding a unique hybrid core or center circulation in a redeveloped storm, obtaining measurements on the strongest side of ...
Nanosponges that soak up a dangerous pore-forming toxin produced by MRSA (methicillin-resistant Staphylococcus aureus) could serve as a safe and effective vaccine against this toxin.
This "nanosponge vaccine" enabled the immune systems of mice to block the adverse effects of the alpha-haemolysin toxin from MRSA—both within the bloodstream and on the skin. Nanoengineers from the University of California, San Diego described the safety and efficacy of this nanosponge vaccine in the December 1 issue of ...
Max Planck researchers are able to reveal the spatial structure of chiral molecules
Small difference, large effect: Most biological molecules occur in two variants, an original and its mirror image. As a result, they are related to one another like the left hand to the right.
For instance, the left- and right-handed variant of the same molecule makes lemons smell different from oranges. ...
Scientists at MPQ develop a new model for realizing the Fractional Quantum Hall Effect in lattice systems
It is fascinating how quantum mechanical behaviour of particles at smallest scales can give rise to strange properties that can be observed in the classical world. One example is the Fractional Quantum Hall Effect (FQH) that was discovered about 30 years ago in semiconductor devices.
It is one of the ...
When a chair leg breaks or a cell phone shatters, either must be repaired or replaced. But what if these materials could be programmed to regenerate-themselves, replenishing the damaged or missing components, and thereby extend their lifetime and reduce the need for costly repairs?
That potential is now possible according to researchers at the University of Pittsburgh Swanson School of Engineering, who have developed computational models to design a new polymer gel that would enable complex materials to regenerate themselves.
The article, "Harnessing Interfacially-Active Nanorods to Regenerate Severed Polymer Gels" (DOI: 10.1021/nl403855k), was published ...
03.12.2013 | Health and Medicine
03.12.2013 | Information Technology
03.12.2013 | Ecology, The Environment and Conservation
12.11.2013 | Event News
29.10.2013 | Event News
18.10.2013 | Event News