The dying star, a white dwarf identified as WDJ1524-0030, located in the constellation Ophiuchus in the southern sky, is losing its brightness as it cools, its nuclear fuel spent. It will be monitored continuously from May 15 to June 11 by WET, a global partnership of telescopes which was formed in 1986.
Like an international relay team, observers at Mt. Cuba Observatory in Greenville, Del., will focus on and photograph the white dwarf until sunrise, and then observers at McDonald Observatory in Fort Davis, Texas, and at Kitt Peak National Observatory in Tucson, Ariz., will stand watch while the star is in their sky, followed by observers in New Zealand, Australia, China, and so on, around the globe.
The thousands of photographs of the white dwarf taken by WET will be e-mailed to the command center at Mt. Cuba Observatory staffed by University of Delaware researchers, for archiving and eventual analysis using the fledgling science of “star quakes” known as asteroseismology.
“A white dwarf is the size of the Earth and as dense as the sun. This star pulsates or quakes as waves of energy travel through it -- its outer surface sloshes from side to side, like waves on the ocean,” says Judi Provencial, assistant professor of physics and astronomy at UD and director of the Delaware Asteroseismic Research Center (DARC).
“What is of interest to scientists is the shape of the pulses,” Provencal notes. “From them, we can measure how the atmosphere is moving around in these pulsating stars and figure out what's going on inside them. This one is really sloshing around.”
There are thousands of white dwarfs in our galaxy; however, only about 30 percent are bright enough for scientists to study using asteroseismics, which can determine the age, temperature and composition of a star from its oscillations and brightness.
Provencal says that WDJ1524-0030 is one of only about 20 percent of the stars in the universe whose atmosphere is composed of helium versus hydrogen. The WET team hopes to find out the composition of the star's core, whether hydrogen or oxygen.
The process of discovery will take on the order of two years to stitch together all of the images, analyze the data, interpret the data with the input of the WET community and report the results. Eventually, the findings will be applied to other stars, including the sun, and to our own planet, Provencal says.
“We don't understand the weather on Earth, the transport of energy,” she says. “We don't understand convection at all. Hopefully, this field of research, which is still very new, will help every aspect of astronomy.”
Putting the Observing Run into Focus
Organizing all of the telescopes for an observing run may seem akin to aligning the planets. More than 20 telescopes are participating in the current run. Provencal and Susan Thompson, co-director of DARC, needed to submit applications for some of the major telescopes several years in advance.
Only one in five proposals typically gets selected by such competitive research facilities as the William Herschel Telescope in the Canary Islands. With a lens that is 4.2 meters in diameter, the telescope is the largest that has signed on to participate, Provencal says.
Before the advent of the Internet, Provencal says she and her colleagues at the command center used to have to call each observatory on the telephone to participate.
“In South Africa, we had to call the international operator, who could only get out to the telescope by a hand-cranked phone and you could hear that in the background. The Internet has taken some of the fun out of that, but France still likes to be called every day of the observing run,” Provencal says. “And at Peak-Turskol in Russia, the astronomers say they have several cats that like to participate.”
Provencal says that she and her colleagues in the WET community like to study cooling stars “because it's cool.”
While the administration of the Whole Earth Telescope is supported by the Crystal Trust Foundation, the observers are not paid to observe.
“Without them, it wouldn't happen,” she says. “It's a community effort.”
These observatories are participating in the Whole Earth Telescope’s international observing run, which UD is coordinating, to monitor the white dwarf WDJ1524-0030. Telescope lens diameter is in parentheses:* Beijing Astronomical Observatory (BAO), China (2.1 m/6.9 ft)
* Vienna Observatory, Austria (0.68m/2.2 ft)
Tracey Bryant | Newswise Science News
Exploring the mysteries of supercooled water
01.03.2017 | American Institute of Physics
Optical generation of ultrasound via photoacoustic effect
01.03.2017 | American Institute of Physics
Enzymes behave differently in a test tube compared with the molecular scrum of a living cell. Chemists from the University of Basel have now been able to simulate these confined natural conditions in artificial vesicles for the first time. As reported in the academic journal Small, the results are offering better insight into the development of nanoreactors and artificial organelles.
Enzymes behave differently in a test tube compared with the molecular scrum of a living cell. Chemists from the University of Basel have now been able to...
On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.
On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...
Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...
The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.
The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...
13.02.2017 | Event News
10.02.2017 | Event News
09.02.2017 | Event News
01.03.2017 | Health and Medicine
01.03.2017 | Physics and Astronomy
01.03.2017 | Life Sciences