Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

UA astronomers take sharpest photos ever of the night sky

22.08.2013
Using a new camera and a telescope mirror that vibrates a thousand times each second to counteract atmospheric flickering, astronomers have achieved image resolution capabilities that could see a baseball diamond on the moon

Astronomers at the University of Arizona, the Arcetri Observatory near Florence, Italy and the Carnegie Observatory have developed a new type of camera that allows scientists to take sharper images of the night sky than ever before.


The Magellan Telescope with MagAO's Adaptive Secondary Mirror (ASM) is mounted at the top looking down some 30 feet onto the 21-foot diameter primary mirror, which is encased inside the blue mirror cell.

Credit: Yuri Beletsky, Las Campanas Observatory

The team has been developing this technology for more than 20 years at observatories in Arizona, most recently at the Large Binocular Telescope, or LBT, and has now deployed the latest version of these cameras in the high desert of Chile at the Magellan 6.5-meter telescope.

"It was very exciting to see this new camera make the night sky look sharper than has ever before been possible," said UA astronomy professor Laird Close, the project's principal scientist. "We can, for the first time, make long-exposure images that resolve objects just 0.02 arcseconds across – the equivalent of a dime viewed from more than a hundred miles away. At that resolution, you could see a baseball diamond on the moon."

The twofold improvement over past efforts rests on the fact that for the first time, a telescope with a large diameter primary mirror is being used for digital photography at its theoretical resolution limit in visible wavelengths – light that the human eye can see.

"As we move towards shorter wavelengths, image sharpness improves," said Jared Males, a NASA Sagan Fellow at the UA's department of astronomy. "Until now, large telescopes could make the theoretically sharpest photos only in infrared – or long wavelength – light, but our new camera can take photos that are twice as sharp in the visible light spectrum."

These images are also at least twice as sharp as what the Hubble Space Telescope can make, because with its 21-foot diameter mirror, the Magellan telescope is much larger than Hubble with its 8-foot mirror. Until now, Hubble always produced the best visible light images, since even large ground-based telescope with complex adaptive optics imaging cameras could only make blurry images in visible light.

To overcome atmospheric turbulence, which plagues earth-based telescopes by causing the image to blur, Close's team developed a very powerful adaptive optics system that floats a thin (1/16th of an inch) curved glass mirror (2.8 feet across) on a magnetic field 30 feet above the telescope's primary mirror.

This so-called Adaptive Secondary Mirror (ASM) can change its shape at 585 points on its surface 1,000 times each second, counteracting the blurring effects of the atmosphere.

"As a result, we can see the visible sky more clearly than ever before," Close said. "It's almost like having a telescope with a 21-foot mirror in space."

The new adaptive optics system, called MagAO for "Magellan Adaptive Optics," has already made some important scientific discoveries, published today in three scientific papers in the Astrophysical Journal. As the system was being tested and received what astronomers call "first light," the team pointed it to a famous and well-studied massive star that gives the Great Orion Nebula (Object M42) most of its UV light. The Orion Nebula, located just below Orion's Belt visible as smudge of light even with regular binoculars.

Considered young at about 1 million years old, this star, called Theta 1 Ori C, has been previously known to be in fact a binary star pair made up of two stars called C1 and C2. However, the separation between the two is so small – about the average distance between Earth and Uranus – that astronomers had never been able to resolve the famous pair in a direct telescope photo.

Once MagAO and its visible science camera called VisAO were pointed towards Theta Ori 1 C, the results were immediate.

"I have been imaging Theta 1 Ori C for more than 20 years and never could directly see that it was in fact two stars," Close said. "But as soon as we turned on the MagAO system it was beautifully split into two stars."

In another result, MagAO has shed light on another mystery: How do how planets form from disks of dust and gas affected by the strong ionizing light called stellar wind coming from a massive star like Theta 1 Ori C, which has about 44 times the mass of the sun?

The team used MagAO and VisAO to look for red light from ionized hydrogen gas to trace out how the strong UV radiation and stellar wind from Theta 1 Ori C affects the disks around its neighboring stars.

"Close to Theta 1 Ori C, there are two very young stars surrounded by disks of gas and dust," said Ya-Lin Wu, a graduate student and lead author on one of the publications. "Theta 1 Ori C pummels those disks with stellar wind and UV light. It looks like they are being bent backwards by a strong wind."

MagAO's photo revealed that the two stars and their protoplanetary disks are heavily distorted into teardrop shapes as the strong UV light and wind create shock fronts and drag gas downwind of the pair.

The distribution of gas and dust in young planetary systems is another unsolved problem in planet formation. The team used VisAO's simultaneous/spectral differential imager, or SDI, to estimate the mass of another intriguing object in the Orion Nebula: one of a few stars in Orion sporting a rare "silhouette disk." The SDI camera allowed the light from the star to be removed at a very high level—offering, for the first time, a clear look at the inner regions of the silhouette.

"The disk lies in front of the bright Orion nebula, so we see the dark shadow cast as the dust in the disk absorbs background light from the nebula," said Kate Follette, a graduate student and lead author of one of the three papers published in the Astrophysical Journal. "Picture a moth flying across a bright movie screen: Its body will appear opaque, while the wings will be partially transparent. Our SDI instrument allows us to peer into the silhouette and trace how much dust is at each location in the disk based on how transparent or opaque it is."

"We were surprised to find that the amount of attenuated light from the nebula never reached an opaque point," she said. "It seems as though the outer parts of this disk have less dust than we would have expected."

"It is important to understand how dust is laid out in these objects because that dust and gas is what nature uses to build planets," Close explained. "Our new imaging capabilities revealed there is very little dust and gas in the outer part of the disk."

According to Close, the silhouette disk might have been close to the massive star Theta 1 Ori C at some point, which might have blown away its outer dust and gas.

"This tells us something about planet-forming disks in these dense, stellar nurseries," Close said. "There appears to be a limit to the formation of massive planets very far away from their parent stars. One possible explanation might be the presence of a massive star like Theta 1 Ori C stripping away the outer gas and dust."

The MagAO system was developed with support of the National Science Foundation MRI, TSIP and ATI grant programs. The Adaptive Secondary Mirror itself was produced by Microgate and ADS of Italy, with the UA's Steward Observatory Mirror Lab. The MagAO pyramid wavefront sensor was developed at the Arcetri Observatory, Italy. The Magellan telescopes are operated by a partnership between the Carnegie institute, the UA Harvard University, MIT and the University of Michigan. The work of NASA Sagan Fellows Jared Males and Katie Morzinski was performed in part under contract with the California Institute of Technology and was funded by NASA through the Sagan Fellowship Program executed by the NASA Exoplanet Science Institute. The work of Kate Follette was funded in part by the NSF Graduate Research Fellowship program.

Daniel Stolte | EurekAlert!
Further information:
http://www.arizona.edu

More articles from Physics and Astronomy:

nachricht From rocks in Colorado, evidence of a 'chaotic solar system'
23.02.2017 | University of Wisconsin-Madison

nachricht Prediction: More gas-giants will be found orbiting Sun-like stars
22.02.2017 | Carnegie Institution for Science

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Stingless bees have their nests protected by soldiers

24.02.2017 | Life Sciences

New risk factors for anxiety disorders

24.02.2017 | Life Sciences

MWC 2017: 5G Capital Berlin

24.02.2017 | Trade Fair News

VideoLinks
B2B-VideoLinks
More VideoLinks >>>