Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Turbulence responsible for black holes' balancing act

16.07.2009
New simulations reveal that turbulence created by jets of material ejected from the disks of the universe's largest black holes is responsible for halting star formation

We live in a hierarchical Universe where small structures join into larger ones. Earth is a planet in our Solar System, the Solar System resides in the Milky Way Galaxy, and galaxies combine into groups and clusters.

Clusters are the largest structures in the Universe, but sadly our knowledge of them is not proportional to their size. Researchers have long known that the gas in the centers of some galaxy clusters is rapidly cooling and condensing, but were puzzled why this condensed gas did not form into stars. Until recently, no model existed that successfully explained how this was possible.

Evan Scannapieco, a theoretical astrophysicist, has spent much of his career studying the evolution of galaxies and clusters. "There are two types of clusters: cool-core clusters and non-cool core clusters," he explains. "Non-cool core clusters haven't been around long enough to cool, whereas cool-core clusters are rapidly cooling, although by our standards they are still very hot."

Scannapieco is an assistant professor in Arizona State University's School of Earth and Space Exploration in the College of Liberal Arts and Sciences.

X-ray telescopes have revolutionized our understanding of the activity occurring within cool-core clusters. Although these clusters can contain hundreds or even thousands of galaxies, they are mostly made up of a diffuse, but very hot gas known as the intracluster medium. This intergalactic gas is only visible to X-ray telescopes, which are able to map out its temperature and structure. These observations show that the diffuse gas is rapidly cooling into the centers of cool-core clusters.

At the core of each of these clusters is a black hole, billions of times more massive than the Sun. Some of the cooling medium makes its way down to a dense disk surrounding this black hole, some of it goes into the black hole itself, and some of it is shot outward. X-ray images clearly show jet-like bursts of ejected material, which occur in regular cycles.

But why were these outbursts so regular, and why did the cooling gas never drop to colder temperatures that lead to the formation of stars? Some unknown mechanism was creating an impressive balancing act.

"It looked like the jets coming from black holes were somehow responsible for stopping the cooling," says Scannapieco, "but until now no one was able to determine exactly how."

Scannapieco and Marcus Brüggen, a professor at Jacobs University in Bremen, Germany, used the powerful supercomputers at ASU to develop their own three-dimensional simulation of the galaxy cluster surrounding one of the Universe's biggest black holes. By adapting an approach developed by Guy Dimonte at Los Alamos National Laboratory and Robert Tipton at Lawrence Livermore National Laboratory, Scannapieco and Brüggen added the component of turbulence to the simulations, which was never accounted for in the past.

That was the key ingredient.

Turbulence works in partnership with the black hole to maintain the balance. Without the turbulence, the jets coming from around black hole would grow stronger and stronger, and the gas would cool catastrophically into a swarm of new stars. When turbulence is accounted for, the black hole not only balances the cooling, but goes through regular cycles of activity.

"When you have turbulent flow, you have random motions on all scales," explains Brüggen. "Each jet of material ejected from the disk creates turbulence that mixes everything together."

Scannapieco and Brüggen's results, to be published in the journal Monthly Notices of the Royal Astronomical Society, reveal that turbulence acts to effectively mix the heated region with its surroundings so that the cool gas can't make it down to the black hole, thus preventing star formation.

Every time some cool gas reaches the black hole, it is shot out in a jet. This generates turbulence that mixes the hot gas with the cold gas. This mixture becomes so hot that it doesn't accrete onto the black hole. The jet stops and there is nothing to drive the turbulence so it fades away. At that point, the hot gas no longer mixes with the cold gas, so the center of the cluster cools, and more gas makes its way down to the black hole.

Before long, another jet forms and the gas is once again mixed together.

"We improved our simulations so that they could capture those tiny turbulent motions," explains Scannapieco. "Even though we can't see them, we can estimate what they would do. The time it takes for the turbulence to decay away is exactly the same amount of time observed between the outbursts."

Nicole Staab | EurekAlert!
Further information:
http://www.asu.edu

More articles from Physics and Astronomy:

nachricht Seeing the quantum future... literally
16.01.2017 | University of Sydney

nachricht Airborne thermometer to measure Arctic temperatures
11.01.2017 | Moscow Institute of Physics and Technology

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Designing Architecture with Solar Building Envelopes

Among the general public, solar thermal energy is currently associated with dark blue, rectangular collectors on building roofs. Technologies are needed for aesthetically high quality architecture which offer the architect more room for manoeuvre when it comes to low- and plus-energy buildings. With the “ArKol” project, researchers at Fraunhofer ISE together with partners are currently developing two façade collectors for solar thermal energy generation, which permit a high degree of design flexibility: a strip collector for opaque façade sections and a solar thermal blind for transparent sections. The current state of the two developments will be presented at the BAU 2017 trade fair.

As part of the “ArKol – development of architecturally highly integrated façade collectors with heat pipes” project, Fraunhofer ISE together with its partners...

Im Focus: How to inflate a hardened concrete shell with a weight of 80 t

At TU Wien, an alternative for resource intensive formwork for the construction of concrete domes was developed. It is now used in a test dome for the Austrian Federal Railways Infrastructure (ÖBB Infrastruktur).

Concrete shells are efficient structures, but not very resource efficient. The formwork for the construction of concrete domes alone requires a high amount of...

Im Focus: Bacterial Pac Man molecule snaps at sugar

Many pathogens use certain sugar compounds from their host to help conceal themselves against the immune system. Scientists at the University of Bonn have now, in cooperation with researchers at the University of York in the United Kingdom, analyzed the dynamics of a bacterial molecule that is involved in this process. They demonstrate that the protein grabs onto the sugar molecule with a Pac Man-like chewing motion and holds it until it can be used. Their results could help design therapeutics that could make the protein poorer at grabbing and holding and hence compromise the pathogen in the host. The study has now been published in “Biophysical Journal”.

The cells of the mouth, nose and intestinal mucosa produce large quantities of a chemical called sialic acid. Many bacteria possess a special transport system...

Im Focus: Newly proposed reference datasets improve weather satellite data quality

UMD, NOAA collaboration demonstrates suitability of in-orbit datasets for weather satellite calibration

"Traffic and weather, together on the hour!" blasts your local radio station, while your smartphone knows the weather halfway across the world. A network of...

Im Focus: Repairing defects in fiber-reinforced plastics more efficiently

Fiber-reinforced plastics (FRP) are frequently used in the aeronautic and automobile industry. However, the repair of workpieces made of these composite materials is often less profitable than exchanging the part. In order to increase the lifetime of FRP parts and to make them more eco-efficient, the Laser Zentrum Hannover e.V. (LZH) and the Apodius GmbH want to combine a new measuring device for fiber layer orientation with an innovative laser-based repair process.

Defects in FRP pieces may be production or operation-related. Whether or not repair is cost-effective depends on the geometry of the defective area, the tools...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

12V, 48V, high-voltage – trends in E/E automotive architecture

10.01.2017 | Event News

2nd Conference on Non-Textual Information on 10 and 11 May 2017 in Hannover

09.01.2017 | Event News

Nothing will happen without batteries making it happen!

05.01.2017 | Event News

 
Latest News

Solar Collectors from Ultra-High Performance Concrete Combine Energy Efficiency and Aesthetics

16.01.2017 | Trade Fair News

3D scans for the automotive industry

16.01.2017 | Automotive Engineering

Nanoparticle Exposure Can Awaken Dormant Viruses in the Lungs

16.01.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>