Using electricity to make a nanoantenna emit light: this is what physicists from the University of Würzburg have accomplished in a world first. They present their antenna measuring just 250 nanometres in the magazine "Nature Photonics".
Electrically powered miniature light sources will be useful in the future, for example, in smartphone displays. Given the increased integration of 3D techniques, the required pixel density should soar in these devices. Nano light sources could also be used on computer chips for low-loss data exchange between processor cores at the speed of light.
A gold particle at its centre: The world's first electrically powered optical antenna was built at the University of Würzburg's Department of Physics.
(Picture: Department of Physics)
Würzburg physicists have shown a way to implementing such light sources in a pioneering piece of work: In the magazine "Nature Photonics" they describe for the first time how light is generated using an electrically powered nanoantenna made of gold. The antenna was developed by Professor Bert Hecht's team and at the Department of Technical Physics.
Applying the laws of antenna technology with light
How does an optical antenna work? "In principle, it works in the same way as its big sister, the radio antenna," Bert Hecht explains: An AC voltage is applied that causes electrons in the metal to oscillate. As a result, the antennas emit electromagnetic waves of a defined shape and wavelength specified by the antenna geometry.
Transferring the laws of antenna technology to light at nano scale is technically challenging. So the Würzburg physicists had to come up with an idea. In the end, a sophisticated nano structure assured their success: Its optical antenna has two arms each fitted with a contact wire and whose ends almost touch.
The tiny space between the arms is prepared with a gold nano particle which touches the one arm and leaves a gap of about one nanometre to the other arm. The gap is so small that electrons can bridge it due to the quantum mechanical tunnel effect when applying voltage, causing oscillations with optical frequencies.
The length of the antenna arms determines the colour of the light
The antenna thus constructed emits electromagnetic waves in the form of visible light. The colour of the light is determined by the length of the antenna arms. "This has allowed us to build the world's most compact electrically powered light source to date whose properties can moreover be controlled by adjusting the antenna geometry," Hecht further.
So in principle, such antennas can be built; however, much work needs yet to be done until they are ready for use. For one thing, the physicists have to further improve the efficiency: Too much electricity is lost as heat when operating the optical antenna. For another, the operational stability has to be increased, as the golden nano structure has only worked for a few hours so far.
“Electrically driven optical antennas”, Johannes Kern, René Kullock, Jord Prangsma, Monika Emmerling, Martin Kamp, and Bert Hecht. Nature Photonics, Advance Online Publication 17 August 2015, DOI: 10.1038/nphoton.2015.141
Prof. Dr. Bert Hecht, Department of Physics, University of Würzburg, Phone +49 931 31-85863, email@example.com
Robert Emmerich | Julius-Maximilians-Universität Würzburg
New NASA study improves search for habitable worlds
20.10.2017 | NASA/Goddard Space Flight Center
Physics boosts artificial intelligence methods
19.10.2017 | California Institute of Technology
University of Maryland researchers contribute to historic detection of gravitational waves and light created by event
On August 17, 2017, at 12:41:04 UTC, scientists made the first direct observation of a merger between two neutron stars--the dense, collapsed cores that remain...
Seven new papers describe the first-ever detection of light from a gravitational wave source. The event, caused by two neutron stars colliding and merging together, was dubbed GW170817 because it sent ripples through space-time that reached Earth on 2017 August 17. Around the world, hundreds of excited astronomers mobilized quickly and were able to observe the event using numerous telescopes, providing a wealth of new data.
Previous detections of gravitational waves have all involved the merger of two black holes, a feat that won the 2017 Nobel Prize in Physics earlier this month....
Material defects in end products can quickly result in failures in many areas of industry, and have a massive impact on the safe use of their products. This is why, in the field of quality assurance, intelligent, nondestructive sensor systems play a key role. They allow testing components and parts in a rapid and cost-efficient manner without destroying the actual product or changing its surface. Experts from the Fraunhofer IZFP in Saarbrücken will be presenting two exhibits at the Blechexpo in Stuttgart from 7–10 November 2017 that allow fast, reliable, and automated characterization of materials and detection of defects (Hall 5, Booth 5306).
When quality testing uses time-consuming destructive test methods, it can result in enormous costs due to damaging or destroying the products. And given that...
Using a new cooling technique MPQ scientists succeed at observing collisions in a dense beam of cold and slow dipolar molecules.
How do chemical reactions proceed at extremely low temperatures? The answer requires the investigation of molecular samples that are cold, dense, and slow at...
Scientists from the Max Planck Institute of Quantum Optics, using high precision laser spectroscopy of atomic hydrogen, confirm the surprisingly small value of the proton radius determined from muonic hydrogen.
It was one of the breakthroughs of the year 2010: Laser spectroscopy of muonic hydrogen resulted in a value for the proton charge radius that was significantly...
17.10.2017 | Event News
10.10.2017 | Event News
10.10.2017 | Event News
20.10.2017 | Information Technology
20.10.2017 | Materials Sciences
20.10.2017 | Interdisciplinary Research