Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Improved e-jet printing provides higher resolution and more versatility

07.09.2007
By combining electrically induced fluid flow with nanoscale nozzles, researchers at the University of Illinois have established new benchmarks for precision control and resolution in jet-printing processes.

“We have invented methods for an electrohydrodynamic jet (e-jet) printing process that can produce patterns and functional devices that establish new resolution benchmarks for liquid printing, significantly exceeding those of established ink-jet technologies,” said John Rogers, a Founder Professor of Materials Science and Engineering, and corresponding author of a paper accepted for publication in the journal Nature Materials, and posted on its Web site.

This type of e-jet printing could be used for large-area circuits, displays, photovoltaic modules and related devices, as well as other wide-ranging application possibilities in security, biotechnology and photonics, Rogers said.

The success of this effort relied critically on an interdisciplinary team of materials scientists, chemists, mechanical engineers, electrical engineers and physicists within the university’s Center for Nanoscale Chemical Electrical Mechanical Manufacturing Systems, a nanoscale science and engineering center funded by the National Science Foundation.

“As an industrial process, this work opens up the possibility for low-cost and
high-performance printed electronics and other systems that involve materials that cannot be manipulated with more common patterning methods derived from microelectronics fabrication,” said Placid Ferreira, the Grayce Wicall Gauthier Professor of Mechanical Science and Engineering, the director of the center and a key member of the team.

“The neat thing is that we find that this extremely high-resolution form of e-jet printing can also be used for diverse systems, such as printing microarrays of DNA spots for bioanalysis, or printing carbon nanotubes and other classes of nanomaterials that are difficult to pattern in other ways,” said Rogers, who also is a researcher at the Beckman Institute and at the university’s Frederick Seitz Materials Research Laboratory. “These capabilities are taking our research in new and exciting directions.”

Unlike conventional ink-jet printers, which use heat or mechanical vibrations to launch liquid droplets through a nozzle, e-jet printing uses electric fields to pull the fluid out. Although the concept of electric-field induced flow is not new, the way the research team has exploited this phenomenon with nanoscale nozzles and precision control of electric fields to achieve unprecedented levels of resolution is an important advance.

The researchers’ e-jet printing head consists of a gold-coated microcapillary nozzle (with a diameter as small as 300 nanometers) mounted on a computer-controlled mechanical support. An organic, Teflon-like coating on the gold ensures the ink flows cleanly out the nozzle toward the target. Tiny droplets of ink eject onto a moving substrate to produce printed patterns. Lines with widths as narrow as 700 nanometers, and dots as small as 250 nanometers, can be achieved in this fashion.

As a demonstration of electronic device fabrication by e-jet printing, thin-film transistors that use aligned arrays of single-walled carbon nanotubes as the semiconductor and e-jet-printed source and drain electrodes were printed on flexible plastic substrates. The transistors were fully operational, with properties comparable to similar devices fabricated with conventional photolithographic methods.

The team also demonstrated that e-jet printing could be extended to a wide variety of functional organic and inorganic inks, including suspensions of solid objects (such as nanoscale silicon rods) with resolutions again extending to the submicron range.

Because the nozzles are routed directly to reservoirs of inks, e-jet printing has the capability to deliver large volumes of ink to a surface, and offers the ability to perform preprocessing on the inks before printing, Rogers said.

The existing e-jet printer can print text, drawings and images in a fully automated fashion. Current research seeks to improve the printing speed by incorporating large-scale nozzle arrays, and to explore the fundamental limits in resolution.

“The work represents an important milestone in the development of liquid-jet printing technology,” Rogers said, “which creates many exciting possibilities.”

Funding was provided by the National Science Foundation. Part of the work was carried out in the university’s Center for Microanalysis of Materials, which is partially supported by the U.S. Department of Energy.

Editor’s note: To reach John Rogers, call 217-244-4979; e-mail: jrogers@uiuc.edu.

James E. Kloeppel | University of Illinois
Further information:
http://www.uiuc.edu

More articles from Physics and Astronomy:

nachricht Mars 2020 mission to use smart methods to seek signs of past life
17.08.2017 | Goldschmidt Conference

nachricht Gold shines through properties of nano biosensors
17.08.2017 | American Institute of Physics

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Fizzy soda water could be key to clean manufacture of flat wonder material: Graphene

Whether you call it effervescent, fizzy, or sparkling, carbonated water is making a comeback as a beverage. Aside from quenching thirst, researchers at the University of Illinois at Urbana-Champaign have discovered a new use for these "bubbly" concoctions that will have major impact on the manufacturer of the world's thinnest, flattest, and one most useful materials -- graphene.

As graphene's popularity grows as an advanced "wonder" material, the speed and quality at which it can be manufactured will be paramount. With that in mind,...

Im Focus: Exotic quantum states made from light: Physicists create optical “wells” for a super-photon

Physicists at the University of Bonn have managed to create optical hollows and more complex patterns into which the light of a Bose-Einstein condensate flows. The creation of such highly low-loss structures for light is a prerequisite for complex light circuits, such as for quantum information processing for a new generation of computers. The researchers are now presenting their results in the journal Nature Photonics.

Light particles (photons) occur as tiny, indivisible portions. Many thousands of these light portions can be merged to form a single super-photon if they are...

Im Focus: Circular RNA linked to brain function

For the first time, scientists have shown that circular RNA is linked to brain function. When a RNA molecule called Cdr1as was deleted from the genome of mice, the animals had problems filtering out unnecessary information – like patients suffering from neuropsychiatric disorders.

While hundreds of circular RNAs (circRNAs) are abundant in mammalian brains, one big question has remained unanswered: What are they actually good for? In the...

Im Focus: RAVAN CubeSat measures Earth's outgoing energy

An experimental small satellite has successfully collected and delivered data on a key measurement for predicting changes in Earth's climate.

The Radiometer Assessment using Vertically Aligned Nanotubes (RAVAN) CubeSat was launched into low-Earth orbit on Nov. 11, 2016, in order to test new...

Im Focus: Scientists shine new light on the “other high temperature superconductor”

A study led by scientists of the Max Planck Institute for the Structure and Dynamics of Matter (MPSD) at the Center for Free-Electron Laser Science in Hamburg presents evidence of the coexistence of superconductivity and “charge-density-waves” in compounds of the poorly-studied family of bismuthates. This observation opens up new perspectives for a deeper understanding of the phenomenon of high-temperature superconductivity, a topic which is at the core of condensed matter research since more than 30 years. The paper by Nicoletti et al has been published in the PNAS.

Since the beginning of the 20th century, superconductivity had been observed in some metals at temperatures only a few degrees above the absolute zero (minus...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Call for Papers – ICNFT 2018, 5th International Conference on New Forming Technology

16.08.2017 | Event News

Sustainability is the business model of tomorrow

04.08.2017 | Event News

Clash of Realities 2017: Registration now open. International Conference at TH Köln

26.07.2017 | Event News

 
Latest News

Gold shines through properties of nano biosensors

17.08.2017 | Physics and Astronomy

Greenland ice flow likely to speed up: New data assert glaciers move over sediment, which gets more slippery as it gets wetter

17.08.2017 | Earth Sciences

Mars 2020 mission to use smart methods to seek signs of past life

17.08.2017 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>