Using ESO’s Very Large Telescope and the W.M. Keck Observatory, astronomers at the Ecole Polytechnique Fédérale de Lausanne in Switzerland and the California Institute of Technology, USA, have discovered the first known triplet of quasars. This close trio of supermassive black holes lies about 10.5 billion light-years away towards the Virgo (The Virgin) constellation.
“Quasars are extremely rare objects,” says George Djorgovski, from Caltech and leader of the team that made the discovery. “To find two of them so close together is very unlikely if they were randomly distributed in space. To find three is un-precedented.”
The findings are being reported at the winter 2007 meeting of the American Astronomical Society in Seattle, USA.
Quasars are extraordinary luminous objects in the distant universe, thought to be powered by supermassive black holes at the heart of galaxies. A single quasar could be a thousand times brighter than an entire galaxy of a hundred billion stars, and yet this remarkable amount of energy originates from a volume smaller than our solar system. About a hundred thousand quasars have been found to date, and among them several tens of close pairs, but this is the first known case of a close triple quasar system.
Quasars (QUAsi StellAR Sources) were first discovered in 1963 by the Dutch-American astronomer Maarten Schmidt at the Palomar Observatory (California, USA) and the name refers to their ‘star-like’ appearance on the images obtained at that time. Distinguishing them from stars is thus no easy task and discovering a close trio of such objects is even less obvious.
The feat could only be accomplished by combining images from two of the largest ground-based telescopes, ESO’s 8.2-m Very Large Telescope at Cerro Paranal, in Chile, and the W. M. Keck Observatory’s 10-m telescope atop Mauna Kea, Hawaii, as well as using very sophisticated and efficient image sharpening method.
The distant quasar LBQS 1429-008 was first discovered in 1989 by an international team of astronomers led by Paul Hewett of the Institute of Astronomy in Cambridge, England. Hewett and his collaborators found a fainter companion to their quasar, and proposed that it was a case of gravitational lensing. According to Einstein’s general theory of relativity, if a large mass (such as a big galaxy or a cluster of galaxies) is placed along the line of sight to a distant quasar, the light rays are bent, and an observer on Earth will see two or more close images of the quasar – a cosmic mi-rage. The first such gravitational lens was discovered in 1979, and hundreds of cases are now known. However, several groups over the past several years cast doubts that this system is a gravitational lens, and proposed instead that it is a close physical pair of quasars.
What the Caltech-Swiss team has found is that there is a third, even fainter quasar associated with the previously known two. The three quasars have the same redshift, hence, are at the same distance from us.
The astronomers performed an extensive theoretical modeling, trying to explain the observed geometry of the three images as a consequence of gravitational lensing. “We just could not reproduce the data,” says Frédéric Courbin of Lausanne. “It is essentially impossible to account for what we see using reasonable gravitational lensing models.”
Moreover, there is no trace of a possible lensing galaxy, which would be needed if the system were a gravitational lens. The team has also documented small, but significant differences in the properties of the three quasars. These are much easier to understand if the three quasars are physically distinct objects, rather than gravita-tional lensing mirages. Combining all these pieces of evidence effectively eliminated lensing as a possible explanation.
“We were left with an even more exciting possibility that this is an actual triple quasar,” says Georges Meylan, also from Lausanne. The three quasars are separated by only about 100,000 to 150,000 light-years, which is about the size of our own Milky Way.
Gravitational lensing can be used to probe the distribution of dark and visible mass in the universe, but quasar pairs -and now a triplet- provide astronomers with a different kind of insight.
“Quasars are believed to be powered by gas falling into supermassive black holes,” says Djor-govski. “This process happens very effectively when galaxies collide or merge, and we are observing this system at the time in the cosmic history when such galaxy interactions were at a peak.”
If galaxy interactions were responsible for the quasar activity, having two quasars close together would be much more likely than if they were randomly distributed in space. This may explain the unusual abundance of binary quasars, which have been reported by several groups. “In this case, we are lucky to catch a rare situation where quasars are ignited in three interacting galaxies,” says Ashish Mahabal, one of the Caltech scientists involved in the study.
Discoveries of more such systems in the future may help astronomers understand better the fundamental relationship between the formation and evolution of galaxies, and the supermassive black holes in their cores, now believed to be common in most large galaxies, our own Milky Way included.
Henri Boffin | alfa
Seeing the quantum future... literally
16.01.2017 | University of Sydney
Airborne thermometer to measure Arctic temperatures
11.01.2017 | Moscow Institute of Physics and Technology
Among the general public, solar thermal energy is currently associated with dark blue, rectangular collectors on building roofs. Technologies are needed for aesthetically high quality architecture which offer the architect more room for manoeuvre when it comes to low- and plus-energy buildings. With the “ArKol” project, researchers at Fraunhofer ISE together with partners are currently developing two façade collectors for solar thermal energy generation, which permit a high degree of design flexibility: a strip collector for opaque façade sections and a solar thermal blind for transparent sections. The current state of the two developments will be presented at the BAU 2017 trade fair.
As part of the “ArKol – development of architecturally highly integrated façade collectors with heat pipes” project, Fraunhofer ISE together with its partners...
At TU Wien, an alternative for resource intensive formwork for the construction of concrete domes was developed. It is now used in a test dome for the Austrian Federal Railways Infrastructure (ÖBB Infrastruktur).
Concrete shells are efficient structures, but not very resource efficient. The formwork for the construction of concrete domes alone requires a high amount of...
Many pathogens use certain sugar compounds from their host to help conceal themselves against the immune system. Scientists at the University of Bonn have now, in cooperation with researchers at the University of York in the United Kingdom, analyzed the dynamics of a bacterial molecule that is involved in this process. They demonstrate that the protein grabs onto the sugar molecule with a Pac Man-like chewing motion and holds it until it can be used. Their results could help design therapeutics that could make the protein poorer at grabbing and holding and hence compromise the pathogen in the host. The study has now been published in “Biophysical Journal”.
The cells of the mouth, nose and intestinal mucosa produce large quantities of a chemical called sialic acid. Many bacteria possess a special transport system...
UMD, NOAA collaboration demonstrates suitability of in-orbit datasets for weather satellite calibration
"Traffic and weather, together on the hour!" blasts your local radio station, while your smartphone knows the weather halfway across the world. A network of...
Fiber-reinforced plastics (FRP) are frequently used in the aeronautic and automobile industry. However, the repair of workpieces made of these composite materials is often less profitable than exchanging the part. In order to increase the lifetime of FRP parts and to make them more eco-efficient, the Laser Zentrum Hannover e.V. (LZH) and the Apodius GmbH want to combine a new measuring device for fiber layer orientation with an innovative laser-based repair process.
Defects in FRP pieces may be production or operation-related. Whether or not repair is cost-effective depends on the geometry of the defective area, the tools...
10.01.2017 | Event News
09.01.2017 | Event News
05.01.2017 | Event News
16.01.2017 | Power and Electrical Engineering
16.01.2017 | Information Technology
16.01.2017 | Power and Electrical Engineering