Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Plastic diode could lead to flexible, low power computer circuits, memory

15.11.2005


Ohio State University researchers have invented a new organic polymer tunnel diode – an electronic component that could one day lead to plastic computer memory and plastic logic circuits on computer chips. Today, computer chips use mainly inorganic silicon.



The diode transmits electrical current at room temperature, and its design lends itself to easy, inexpensive manufacturing for smart cards and other memory devices, said Paul Berger, a professor of electrical and computer engineering and professor of physics at Ohio State.

In tests, the team was able to fashion two diodes into a simple computer chip device called a logic switch, which was powered by the voltage equivalent to an ordinary watch battery.


Berger and his students describe their patent-pending invention in the current issue of the scientific journal Applied Physics Letters.

Most plastics don’t conduct electricity, Berger explained. That fact hasn’t stopped researchers from trying to build plastic computer chips, which could be used in lightweight, flexible electronic devices. In their most successful efforts, some groups have coaxed modest numbers of electrons through conducting plastics using quantum mechanical effects – but then only by painstakingly manipulating individual molecules of plastic at cryogenic temperatures. Those experiments have also been difficult to replicate.

Berger and his students got around that problem by taking the opposite approach. Instead of working with one plastic molecule at a time, they painted a thick layer of plastic on top of traditional chip materials, with a specially-designed layer of titanium oxide sandwiched in-between.

They got the idea in 2003 when Sita Asar – then an undergraduate physics student at Ohio State – was designing a plastic solar cell in Berger’s lab. The device was designed to convert solar energy to electrical energy.

When he looked at the results of one of Asar’s experiments, Berger noticed something unusual – a tiny blip in an otherwise smooth graph line charting the amount of electrical current passing through the material. At low voltages, the current spiked, and then returned to normal.

On closer inspection, he saw that the plastic was showing an effect called “negative differential resistance,” in which the current actually decreases over a particular range of increasing voltage. The effect resembled that shown by a semiconductor device called a tunnel diode.

Diodes are one-way conductors that typically power amplifiers for devices such as stereo speakers. Tunnel diodes are so named because they transmit electricity via a quantum mechanical effect known as tunneling, which lets electrons pass through barriers unhindered.

Berger later worked with graduate students Woo-Jun Yoon and Sung-Yong Chung to refine a polymer tunnel diode design that demonstrates the same kind of blip that the solar cell did, but more robustly and more reliably. They also embarked on a study to uncover the physical mechanism which created this effect.

The team is still trying to fully understand why the design works as well as it does, but they have been able to achieve strong quantum mechanical effects in the plastic without manipulating individual molecules.

“The titanium oxide is the key,” Berger said. “In our experiments, when we replace it with anything else, the phenomenon goes away.”

Other research groups have tried to marry polymer tunnel diodes to titanium oxide without success. The breakthrough came when Berger decided to deposit a layer of pure titanium on a chip, and then carefully oxidize it later, instead of depositing titanium oxide all at once, as the others had done. He suspects that it’s the extra control he exerted over the oxidation process that ultimately led to the diode’s enhanced performance.

He and the students were able to combine two plastic tunnel diodes to form a simple logic gate – the structure that writes data on a computer chip.

The gate operated on a mere 1.5 volts of electricity – an amount equal to a watch battery. It also worked at room temperature. These results suggest that it could one day be easily incorporated into traditional computer chips for devices that required low power, Berger said.

Moreover, he and his students created their plastic layer through a process called spin casting, which costs significantly less than the processes currently used to machine silicon chips. In spin casting, drops of a liquid plastic solution are deposited on a surface, and the surface is spun at high speed to spread a thin coating evenly across the surface.

For all of the diode’s good points, Berger stopped short of saying that it could lead to electronics made entirely of plastic.

“Plastic isn’t going to replace silicon – at least, I don’t advocate that. I think that plastic is going to augment silicon,” he said.

He envisions lightweight, portable electronics that knit silicon and plastic together to form a kind of hybrid computer logic circuit or memory. Devices like smart cards and other memory devices would be somewhat bendable and run on less power.

“This new diode is just another tool for the circuit designer’s toolbox,” he said.

This research was partly supported by the National Science Foundation, including an award Berger received from its Research Experience for Undergraduates program.

Paul Berger | EurekAlert!
Further information:
http://www.osu.edu

More articles from Physics and Astronomy:

nachricht Further Improvement of Qubit Lifetime for Quantum Computers
09.12.2016 | Forschungszentrum Jülich

nachricht Electron highway inside crystal
09.12.2016 | Julius-Maximilians-Universität Würzburg

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Electron highway inside crystal

Physicists of the University of Würzburg have made an astonishing discovery in a specific type of topological insulators. The effect is due to the structure of the materials used. The researchers have now published their work in the journal Science.

Topological insulators are currently the hot topic in physics according to the newspaper Neue Zürcher Zeitung. Only a few weeks ago, their importance was...

Im Focus: Significantly more productivity in USP lasers

In recent years, lasers with ultrashort pulses (USP) down to the femtosecond range have become established on an industrial scale. They could advance some applications with the much-lauded “cold ablation” – if that meant they would then achieve more throughput. A new generation of process engineering that will address this issue in particular will be discussed at the “4th UKP Workshop – Ultrafast Laser Technology” in April 2017.

Even back in the 1990s, scientists were comparing materials processing with nanosecond, picosecond and femtosesecond pulses. The result was surprising:...

Im Focus: Shape matters when light meets atom

Mapping the interaction of a single atom with a single photon may inform design of quantum devices

Have you ever wondered how you see the world? Vision is about photons of light, which are packets of energy, interacting with the atoms or molecules in what...

Im Focus: Novel silicon etching technique crafts 3-D gradient refractive index micro-optics

A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.

Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...

Im Focus: Quantum Particles Form Droplets

In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.

“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ICTM Conference 2017: Production technology for turbomachine manufacturing of the future

16.11.2016 | Event News

Innovation Day Laser Technology – Laser Additive Manufacturing

01.11.2016 | Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

 
Latest News

Researchers identify potentially druggable mutant p53 proteins that promote cancer growth

09.12.2016 | Life Sciences

Scientists produce a new roadmap for guiding development & conservation in the Amazon

09.12.2016 | Ecology, The Environment and Conservation

Satellites, airport visibility readings shed light on troops' exposure to air pollution

09.12.2016 | Health and Medicine

VideoLinks
B2B-VideoLinks
More VideoLinks >>>