Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

A traveling-wave engine to power deep space travel

17.09.2004


A University of California scientist working at Los Alamos National Laboratory and researchers from Northrop Grumman Space Technology have developed a novel method for generating electrical power for deep-space travel using sound waves. The traveling-wave thermoacoustic electric generator has the potential to power space probes to the furthest reaches of the Universe.



In research reported in a recent issue of the journal Applied Physics Letters, Laboratory scientist Scott Backhaus and his Northrop Grumman colleagues, Emanuel Tward and Mike Petach, describe the design of a thermoacoustic system for the generation of electricity aboard spacecraft. The traveling-wave engine/linear alternator system is similar to the current thermoelectric generators in that it uses heat from the decay of a radioactive fuel to generate electricity, but is more than twice as efficient.

The new design is an improvement over current thermoelectric devices used for the generation of electricity aboard spacecraft. Such devices convert only 7 percent of the heat source energy into electricity. The traveling-wave engine converts 18 percent of the heat source energy into electricity. Since the only moving component in the device besides the helium gas itself is an ambient temperature piston, the device possesses the kind of high-reliability required of deep space probes.


The traveling-wave engine is a modern-day adaptation of the 19th century thermodynamic invention of Robert Stirling –– the Stirling engine –– which is similar to a steam engine, but uses heated air instead of steam to drive a piston. The traveling-wave engine works by sending helium gas through a stack of 322 stainless-steel wire-mesh discs called a regenerator. The regenerator is connected to a heat source and a heat sink that causes the helium to expand and contract. This expansion and contraction creates powerful sound waves –– in much the same way that lightning in the atmosphere causes the thermal expansion that produces thunder. These oscillating sound waves in the traveling-wave engine drive the piston of a linear alternator that generates electricity.

Todd Hanson | EurekAlert!
Further information:
http://www.lanl.gov

More articles from Physics and Astronomy:

nachricht Prediction: More gas-giants will be found orbiting Sun-like stars
22.02.2017 | Carnegie Institution for Science

nachricht NASA's fermi finds possible dark matter ties in andromeda galaxy
22.02.2017 | NASA/Goddard Space Flight Center

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Microhotplates for a smart gas sensor

22.02.2017 | Power and Electrical Engineering

Scientists unlock ability to generate new sensory hair cells

22.02.2017 | Life Sciences

Prediction: More gas-giants will be found orbiting Sun-like stars

22.02.2017 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>