Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Quantum computer built inside a diamond

05.04.2012
Computer breaks new ground by incorporating a method of protecting against the noise that fouls up quantum systems

Diamonds are forever – or, at least, the effects of this diamond on quantum computing may be.

A team that includes scientists from USC has built a quantum computer in a diamond, the first of its kind to include protection against "decoherence" – noise that prevents the computer from functioning properly.

The demonstration shows the viability of solid-state quantum computers, which – unlike earlier gas- and liquid-state systems – may represent the future of quantum computing because they can be easily scaled up in size. Current quantum computers are typically very small and – though impressive – cannot yet compete with the speed of larger, traditional computers.

The multinational team included USC Professor Daniel Lidar and USC postdoctoral researcher Zhihui Wang, as well as researchers from the Delft University of Technology in the Netherlands, Iowa State University and the University of California, Santa Barbara. Their findings will be published on April 5 in Nature.

The team's diamond quantum computer system featured two quantum bits (called "qubits"), made of subatomic particles.

As opposed to traditional computer bits, which can encode distinctly either a one or a zero, qubits can encode a one and a zero at the same time. This property, called superposition, along with the ability of quantum states to "tunnel" through energy barriers, will some day allow quantum computers to perform optimization calculations much faster than traditional computers.

Like all diamonds, the diamond used by the researchers has impurities – things other than carbon. The more impurities in a diamond, the less attractive it is as a piece of jewelry, because it makes the crystal appear cloudy.

The team, however, utilized the impurities themselves.

A rogue nitrogen nucleus became the first qubit. In a second flaw sat an electron, which became the second qubit. (Though put more accurately, the "spin" of each of these subatomic particles was used as the qubit.)

Electrons are smaller than nuclei and perform computations much more quickly, but also fall victim more quickly to "decoherence." A qubit based on a nucleus, which is large, is much more stable but slower.

"A nucleus has a long decoherence time – in the milliseconds. You can think of it as very sluggish," said Lidar, who holds a joint appointment with the USC Viterbi School of Engineering and the USC Dornsife College of Letters, Arts and Sciences.

Though solid-state computing systems have existed before, this was the first to incorporate decoherence protection – using microwave pulses to continually switch the direction of the electron spin rotation.

"It's a little like time travel," Lidar said, because switching the direction of rotation time-reverses the inconsistencies in motion as the qubits move back to their original position.

The team was able to demonstrate that their diamond-encased system does indeed operate in a quantum fashion by seeing how closely it matched "Grover's algorithm."

The algorithm is not new – Lov Grover of Bell Labs invented it in 1996 – but it shows the promise of quantum computing.

The test is a search of an unsorted database, akin to being told to search for a name in a phone book when you've only been given the phone number.

Sometimes you'd miraculously find it on the first try, other times you might have to search through the entire book to find it. If you did the search countless times, on average, you'd find the name you were looking for after searching through half of the phone book.

Mathematically, this can be expressed by saying you'd find the correct choice in X/2 tries – if X is the number of total choices you have to search through. So, with four choices total, you'll find the correct one after two tries on average.

A quantum computer, using the properties of superposition, can find the correct choice much more quickly. The mathematics behind it are complicated, but in practical terms, a quantum computer searching through an unsorted list of four choices will find the correct choice on the first try, every time.

Though not perfect, the new computer picked the correct choice on the first try about 95 percent of the time – enough to demonstrate that it operates in a quantum fashion.

This research was funded by the National Science Foundation and the US Army Research Office's Multidisciplinary University Research Initiative.

Robert Perkins | EurekAlert!
Further information:
http://www.usc.edu

More articles from Physics and Astronomy:

nachricht Significantly more productivity in USP lasers
06.12.2016 | Fraunhofer-Institut für Lasertechnik ILT

nachricht Shape matters when light meets atom
05.12.2016 | Centre for Quantum Technologies at the National University of Singapore

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Significantly more productivity in USP lasers

In recent years, lasers with ultrashort pulses (USP) down to the femtosecond range have become established on an industrial scale. They could advance some applications with the much-lauded “cold ablation” – if that meant they would then achieve more throughput. A new generation of process engineering that will address this issue in particular will be discussed at the “4th UKP Workshop – Ultrafast Laser Technology” in April 2017.

Even back in the 1990s, scientists were comparing materials processing with nanosecond, picosecond and femtosesecond pulses. The result was surprising:...

Im Focus: Shape matters when light meets atom

Mapping the interaction of a single atom with a single photon may inform design of quantum devices

Have you ever wondered how you see the world? Vision is about photons of light, which are packets of energy, interacting with the atoms or molecules in what...

Im Focus: Novel silicon etching technique crafts 3-D gradient refractive index micro-optics

A multi-institutional research collaboration has created a novel approach for fabricating three-dimensional micro-optics through the shape-defined formation of porous silicon (PSi), with broad impacts in integrated optoelectronics, imaging, and photovoltaics.

Working with colleagues at Stanford and The Dow Chemical Company, researchers at the University of Illinois at Urbana-Champaign fabricated 3-D birefringent...

Im Focus: Quantum Particles Form Droplets

In experiments with magnetic atoms conducted at extremely low temperatures, scientists have demonstrated a unique phase of matter: The atoms form a new type of quantum liquid or quantum droplet state. These so called quantum droplets may preserve their form in absence of external confinement because of quantum effects. The joint team of experimental physicists from Innsbruck and theoretical physicists from Hannover report on their findings in the journal Physical Review X.

“Our Quantum droplets are in the gas phase but they still drop like a rock,” explains experimental physicist Francesca Ferlaino when talking about the...

Im Focus: MADMAX: Max Planck Institute for Physics takes up axion research

The Max Planck Institute for Physics (MPP) is opening up a new research field. A workshop from November 21 - 22, 2016 will mark the start of activities for an innovative axion experiment. Axions are still only purely hypothetical particles. Their detection could solve two fundamental problems in particle physics: What dark matter consists of and why it has not yet been possible to directly observe a CP violation for the strong interaction.

The “MADMAX” project is the MPP’s commitment to axion research. Axions are so far only a theoretical prediction and are difficult to detect: on the one hand,...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

ICTM Conference 2017: Production technology for turbomachine manufacturing of the future

16.11.2016 | Event News

Innovation Day Laser Technology – Laser Additive Manufacturing

01.11.2016 | Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

 
Latest News

Simple processing technique could cut cost of organic PV and wearable electronics

06.12.2016 | Materials Sciences

3-D printed kidney phantoms aid nuclear medicine dosing calibration

06.12.2016 | Medical Engineering

Robot on demand: Mobile machining of aircraft components with high precision

06.12.2016 | Power and Electrical Engineering

VideoLinks
B2B-VideoLinks
More VideoLinks >>>