Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:


Caltech researchers create 'sound bullets'

Highly focused acoustic pulses could produce superior acoustic images, be used as sonic scalpels, and probe for damage in bridges, boat hulls, and other opaque materials

Taking inspiration from a popular executive toy ("Newton's cradle"), researchers at the California Institute of Technology (Caltech) have built a device—called a nonlinear acoustic lens—that produces highly focused, high-amplitude acoustic signals dubbed "sound bullets."

The acoustic lens and its sound bullets (which can exist in fluids—like air and water—as well as in solids) have "the potential to revolutionize applications from medical imaging and therapy to the nondestructive evaluation of materials and engineering systems," says Chiara Daraio, assistant professor of aeronautics and applied physics at Caltech and corresponding author of a recent paper in the Proceedings of the National Academy of Sciences (PNAS) describing the development.

Daraio and postdoctoral scholar Alessandro Spadoni, first author of the paper, crafted their acoustic lens by assembling 21 parallel chains of stainless steel spheres into an array. Each of the 21 chains was strung with 21 9.5-millimeter-wide spheres. (Daraio says particles composed of other elastic materials and/or with different shapes also could be used.)

The device is akin to the Newton's cradle toy, which consists of a line of identical balls suspended from a frame by wires in such a way that they only move in one plane, and just barely touch one another. When one of the end balls is pulled back and released, it strikes the next ball in line and the ball at the opposite end of the cradle flies out; the balls in the middle appear to remain stationary (but really are not, because of the nonlinear dynamics triggered in the system).

The chains of particles in Daraio's and Spadoni's acoustic lens are like a longer version of a Newton's cradle. In the lens, a pulse is excited at one end by an impact with a striker, and nonlinear waves are generated within each chain. These chains, Daraio says, "are the simplest representation of highly nonlinear acoustic waveguides, which exploit the properties of particle contacts to tune the shapes of the traveling acoustic signals and their speed of propagation, creating compact acoustic pulses known as solitary waves." Solitary waves—unlike the rippling waves produced by dropping a pebble into a pond—can exist in isolation, neither preceded nor followed by other waves.

"The solitary waves always maintain the same spatial wavelength in a given system," she adds, "and can have very high amplitude without undergoing any distortion within the lens, unlike the signals produced by currently available technology."

The chains are squeezed closer together—or "precompressed"—using fishing line. By changing the amount of precompression, Daraio and Spadoni were able to vary the speed of the solitary wave. When a series of those waves exit the array, they coalesce at a particular location—a focal point—in a target material (which can be a gas, like air; a liquid; or a solid). This superposition of solitary waves at the focal point forms the sound bullet—a highly compact, large-amplitude acoustic wave. Varying the parameters of the system can also produce a rapid-fire barrage of sound bullets, all trained on the same spot.

In the current design, the spheres are assembled in a two-dimensional arrangement, with each row independent of its neighbors. "Three-dimensional arrangements will be just as easy to create and will allow 3-D control of the sound bullets' appearance and travel path," Spadoni says.

"Our lens introduces the ability to generate compact, high-amplitude signals in a linear medium, and also allows us to dynamically control the location of the focal point," Daraio says. That means it isn't necessary to change any of the geometric components of the lens to change the location of the focal point.

"All we do is adjust the precompression for each chain of spheres," she says.

This simple adjustment should make the sound bullets easy to adapt to a variety of applications. "Anybody who has had an ultrasound exam has noted that the operator switches the probes according to the characteristics and location within the body of what is being imaged," Daraio says. "The acoustic lens we propose would not require replacement of its components, but rather simple adjustments of the precompression on each chain."

The acoustic lens created by Daraio and Spadoni was intended to be a proof of concept, and is probably many years away from being used in commercial applications. "For practical uses," Daraio says, "an improved design for controlling the application of static precompression on each chain would be required—based, for example, on electronics rather than on mechanical impacts as is currently done in our lab."

Still, the instrument has the potential to surpass the clarity and safety of conventional medical ultrasound imaging. The pulses produced by the acoustic lens—which are an order of magnitude more focused and have amplitudes that are orders of magnitude greater than can be created with conventional acoustic devices—"reduce the detrimental effects of noise, producing a clearer image of the target." They also "can travel farther"—deeper within the body—"than low-amplitude pulses," Daraio says.

More intriguingly, the device could enable the development of a non-invasive scalpel that could home in on and destroy cancerous tissues located deep within the body.

"Medical procedures such as hyperthermia therapy seek to act on human tissues by locally increasing the temperature. This is often done by focusing high-energy acoustic signals onto a small area, requiring significant control of the focal region" so that healthy tissue is not also heated and damaged, Daraio explains. "Our lens produces a very compact focal region which could aid further development of hyperthermia techniques."

Furthermore, sound bullets could offer a nondestructive way to probe and analyze the interior of nontransparent objects like bridges, ship hulls, and airplane wings, looking for cracks or other defects.

"Today the performance of acoustic devices is decreased by their linear operational range, which limits the accuracy of the focusing and the amplitude achievable at the focal point," Daraio says. "The new nonlinear acoustic lens proposed with this work leverages nonlinear effects to generate compact acoustic pulses with energies much higher than are currently achievable, with the added benefit of providing great control of the focal position."

The paper, "Generation and control of sound bullets with a nonlinear acoustic lens," was funded by the Army Research Office and the National Science Foundation.

Visit the Media Relations website at

Kathy Svitil | EurekAlert!
Further information:

More articles from Physics and Astronomy:

nachricht Finding the lightest superdeformed triaxial atomic nucleus
20.10.2016 | The Henryk Niewodniczanski Institute of Nuclear Physics Polish Academy of Sciences

nachricht Innovative technique for shaping light could solve bandwidth crunch
20.10.2016 | The Optical Society

All articles from Physics and Astronomy >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New 3-D wiring technique brings scalable quantum computers closer to reality

Researchers from the Institute for Quantum Computing (IQC) at the University of Waterloo led the development of a new extensible wiring technique capable of controlling superconducting quantum bits, representing a significant step towards to the realization of a scalable quantum computer.

"The quantum socket is a wiring method that uses three-dimensional wires based on spring-loaded pins to address individual qubits," said Jeremy Béjanin, a PhD...

Im Focus: Scientists develop a semiconductor nanocomposite material that moves in response to light

In a paper in Scientific Reports, a research team at Worcester Polytechnic Institute describes a novel light-activated phenomenon that could become the basis for applications as diverse as microscopic robotic grippers and more efficient solar cells.

A research team at Worcester Polytechnic Institute (WPI) has developed a revolutionary, light-activated semiconductor nanocomposite material that can be used...

Im Focus: Diamonds aren't forever: Sandia, Harvard team create first quantum computer bridge

By forcefully embedding two silicon atoms in a diamond matrix, Sandia researchers have demonstrated for the first time on a single chip all the components needed to create a quantum bridge to link quantum computers together.

"People have already built small quantum computers," says Sandia researcher Ryan Camacho. "Maybe the first useful one won't be a single giant quantum computer...

Im Focus: New Products - Highlights of COMPAMED 2016

COMPAMED has become the leading international marketplace for suppliers of medical manufacturing. The trade fair, which takes place every November and is co-located to MEDICA in Dusseldorf, has been steadily growing over the past years and shows that medical technology remains a rapidly growing market.

In 2016, the joint pavilion by the IVAM Microtechnology Network, the Product Market “High-tech for Medical Devices”, will be located in Hall 8a again and will...

Im Focus: Ultra-thin ferroelectric material for next-generation electronics

'Ferroelectric' materials can switch between different states of electrical polarization in response to an external electric field. This flexibility means they show promise for many applications, for example in electronic devices and computer memory. Current ferroelectric materials are highly valued for their thermal and chemical stability and rapid electro-mechanical responses, but creating a material that is scalable down to the tiny sizes needed for technologies like silicon-based semiconductors (Si-based CMOS) has proven challenging.

Now, Hiroshi Funakubo and co-workers at the Tokyo Institute of Technology, in collaboration with researchers across Japan, have conducted experiments to...

All Focus news of the innovation-report >>>



Event News

#IC2S2: When Social Science meets Computer Science - GESIS will host the IC2S2 conference 2017

14.10.2016 | Event News

Agricultural Trade Developments and Potentials in Central Asia and the South Caucasus

14.10.2016 | Event News

World Health Summit – Day Three: A Call to Action

12.10.2016 | Event News

Latest News

Innovative technique for shaping light could solve bandwidth crunch

20.10.2016 | Physics and Astronomy

Finding the lightest superdeformed triaxial atomic nucleus

20.10.2016 | Physics and Astronomy

NASA's MAVEN mission observes ups and downs of water escape from Mars

20.10.2016 | Physics and Astronomy

More VideoLinks >>>