Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Helping the elderly beat the heat

21.07.2005


News tips from the Harvard Health Letter



As the population ages, a growing number of people become more vulnerable to extreme summer heat. In 2003, a heat wave was blamed for 14,800 deaths in France. The July issue of the Harvard Health Letter offers tips for the elderly to beat this summer’s heat. In addition to heading for the air conditioning, staying out of the sun, and wearing loose, light clothes:

Review your Medications


Painkillers, for example, can reduce awareness of the heat. Talk to your doctor about your medications if temperatures are climbing, especially if you’re not protected by air conditioning. Older people are also more likely than younger folks to be taking medications that cause fluid loss (and therefore dehydration), including some laxatives, furosemide (Lasix) to counteract water retention, and other diuretics for blood pressure control.

Check Up on a Neighbor

Social isolation is a major risk factor for heat-related illness and death.

Stay Hydrated

Thirst declines with age, and older sweat glands don’t produce as much sweat as they used to. The sweat that is produced tends to contain more salt, and lack of salt in the body can lead to sudden drops in blood pressure.

Listen to your Body

Muscle cramps, fatigue, weakness, impaired concentration, confusion, lightheadedness, nausea, labored breathing, chest discomfort, and a rapid or erratic pulse can all be signs of trouble. If you feel ill -- even just a little -- get to a cool place, drink plenty of cool water, and seek medical help if you don’t improve promptly.

Leah Gourley | EurekAlert!
Further information:
http://www.hms.harvard.edu

More articles from Health and Medicine:

nachricht Organ-on-a-chip mimics heart's biomechanical properties
23.02.2017 | Vanderbilt University

nachricht Researchers identify cause of hereditary skeletal muscle disorder
22.02.2017 | Klinikum der Universität München

All articles from Health and Medicine >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

New pop-up strategy inspired by cuts, not folds

27.02.2017 | Materials Sciences

Sandia uses confined nanoparticles to improve hydrogen storage materials performance

27.02.2017 | Interdisciplinary Research

Decoding the genome's cryptic language

27.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>