Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Expensive wait for hip replacements

15.12.2010
Patients who suffer from anxiety and depression are more likely to report worse results after a hip replacement. A year-long wait for the operation also entails significant costs to both society and the individual, reveals a new thesis from the University of Gothenburg, Sweden.

Drawing on around 40,000 responses from patients selected from the Swedish Hip Arthroplasty Register, the thesis looks at how hip replacement patients perceive their health-related quality of life and level of pain both before and after the operation, as well as how satisfied they are with the results.

“Although the majority report a considerable improvement in their health-related quality of life and are pain-free after their hip replacement, we show that around 5-10% do not improve or have actually deteriorated one year after the operation,” says Ola Rolfson, researcher at the Sahlgrenska Academy’s Department of Orthopaedics.

He explains that there are several reasons for the failure of some patients to get better in the short term. For example, patients with anxiety or depression are more likely to report worse results. However, more research is needed to understand the factors that affect post-operative outcomes.

The thesis also looks at how hip disease impacts on patients’ need for a variety of resources when waiting for a hip replacement, and how this, in turn, translates into additional expense for the patient, relatives and society in general. It emerged that the disease costs around SEK 60,000 (approx. 6000 Euro) in the year before the operation, and that a long wait was linked to higher consumption of resources. This works out at SEK 5,000 (approx. 500 Euro) per month for every patient on the waiting list.

“Doing the right thing, doing the thing right and doing it at the right time is the major challenge facing orthopaedics in the future,” says Rolfson. “The thesis adds information that will make it possible for hip replacement surgery to take another step in the right direction.”

Using the results set out in his thesis, Rolfson will be working to develop a tool that can help to predict and discuss the risks and expected results of surgery in each individual case.

The Swedish Hip Arthroplasty Register is a national healthcare quality register funded by the Swedish Association of Local Authorities and Regions and Region Västra Götaland. The register undertakes research in conjunction with the Sahlgrenska Academy.

The thesis has been successfully defended.

For more information, please contact:
 Ola Rolfson
Tel.: +46(0)70 522 6386
E-mail: ola.rolfson@vgregion.se

Helena Aaberg | idw
Further information:
http://hdl.handle.net/2077/23722
http://www.shpr.se/sv/default.aspx

More articles from Health and Medicine:

nachricht Penn vet research identifies new target for taming Ebola
12.01.2017 | University of Pennsylvania

nachricht The strange double life of Dab2
10.01.2017 | University of Miami Miller School of Medicine

All articles from Health and Medicine >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Designing Architecture with Solar Building Envelopes

Among the general public, solar thermal energy is currently associated with dark blue, rectangular collectors on building roofs. Technologies are needed for aesthetically high quality architecture which offer the architect more room for manoeuvre when it comes to low- and plus-energy buildings. With the “ArKol” project, researchers at Fraunhofer ISE together with partners are currently developing two façade collectors for solar thermal energy generation, which permit a high degree of design flexibility: a strip collector for opaque façade sections and a solar thermal blind for transparent sections. The current state of the two developments will be presented at the BAU 2017 trade fair.

As part of the “ArKol – development of architecturally highly integrated façade collectors with heat pipes” project, Fraunhofer ISE together with its partners...

Im Focus: How to inflate a hardened concrete shell with a weight of 80 t

At TU Wien, an alternative for resource intensive formwork for the construction of concrete domes was developed. It is now used in a test dome for the Austrian Federal Railways Infrastructure (ÖBB Infrastruktur).

Concrete shells are efficient structures, but not very resource efficient. The formwork for the construction of concrete domes alone requires a high amount of...

Im Focus: Bacterial Pac Man molecule snaps at sugar

Many pathogens use certain sugar compounds from their host to help conceal themselves against the immune system. Scientists at the University of Bonn have now, in cooperation with researchers at the University of York in the United Kingdom, analyzed the dynamics of a bacterial molecule that is involved in this process. They demonstrate that the protein grabs onto the sugar molecule with a Pac Man-like chewing motion and holds it until it can be used. Their results could help design therapeutics that could make the protein poorer at grabbing and holding and hence compromise the pathogen in the host. The study has now been published in “Biophysical Journal”.

The cells of the mouth, nose and intestinal mucosa produce large quantities of a chemical called sialic acid. Many bacteria possess a special transport system...

Im Focus: Newly proposed reference datasets improve weather satellite data quality

UMD, NOAA collaboration demonstrates suitability of in-orbit datasets for weather satellite calibration

"Traffic and weather, together on the hour!" blasts your local radio station, while your smartphone knows the weather halfway across the world. A network of...

Im Focus: Repairing defects in fiber-reinforced plastics more efficiently

Fiber-reinforced plastics (FRP) are frequently used in the aeronautic and automobile industry. However, the repair of workpieces made of these composite materials is often less profitable than exchanging the part. In order to increase the lifetime of FRP parts and to make them more eco-efficient, the Laser Zentrum Hannover e.V. (LZH) and the Apodius GmbH want to combine a new measuring device for fiber layer orientation with an innovative laser-based repair process.

Defects in FRP pieces may be production or operation-related. Whether or not repair is cost-effective depends on the geometry of the defective area, the tools...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

12V, 48V, high-voltage – trends in E/E automotive architecture

10.01.2017 | Event News

2nd Conference on Non-Textual Information on 10 and 11 May 2017 in Hannover

09.01.2017 | Event News

Nothing will happen without batteries making it happen!

05.01.2017 | Event News

 
Latest News

Multiregional brain on a chip

16.01.2017 | Power and Electrical Engineering

New technology enables 5-D imaging in live animals, humans

16.01.2017 | Information Technology

Researchers develop environmentally friendly soy air filter

16.01.2017 | Power and Electrical Engineering

VideoLinks
B2B-VideoLinks
More VideoLinks >>>