Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

What Were They Drinking? Researchers Investigate Radioactive Crock Pots

15.01.2010
Radioactive toothpaste, suppositories, makeup: Would-be inventors seeking to capitalize on the discovery of radioactivity in the late 19th century produced a plethora of questionable medical devices and treatments.

Among the most famous of these was the Revigator, an earthenware vessel that, according to an advertisement, would infuse drinking water with “the lost element of original freshness—radioactivity.”

With some technical assistance from the National Institute of Standards and Technology (NIST), researcher Michael Epstein and a group of students at Mount Saint Mary’s University in Emmitsburg, Md., discovered that the risk the Revigator posed flowed not so much from the radioactivity, but from the presence of toxic elements dissolved in the water.

The Radium Ore Revigator Company sold several hundred thousand of their glazed ceramic jugs between 1920 and the mid-1930s. The rough, porous inner surface of the Revigator was lined with clay containing carnotite ore, a potassium-uranium-vanadate mineral which released radon into the water as the radium in the ore decayed. According to the manufacturer, the radiation could treat or cure ailments ranging from arthritis and flatulence to senility and poisoning.

“The Revigator was an attempt to mimic spa, or spring water,” explains Epstein. “People figured that spring water was radioactive, and it seemed to be good for you, so why not make your own? Most of the literature on the Web has referenced the danger as coming from the radioactivity. My students and I wanted to see if that was true.”

Working with NIST scientist Lee Yu, the Mount St. Mary’s team set out to determine the extent of the hazards the Revigator might have posed. According to their recent paper,* the researchers measured the amount of radiation emanating from the vessel with a Geiger counter, the radon concentration in the air and water from a jar that had been sealed for one week, and the levels of toxic elements that may have dissolved into water sealed in the jars for one day and one week using a mass spectrometer, a highly sensitive instrument for detecting chemicals and elements.

The team found that radon concentrations in the air and water sampled from jars sealed for one week significantly exceeded the EPA-recommended maximum contaminant levels (MCL). Nevertheless, the team noted that the concentration of radon in the air, given the drafty conditions of an early 20th century home, would not have posed a significant health risk. Moreover, although the levels of radon in the water were high—between 50,000 and 200,000 picoCuries per liter—the study found that, compared to the myriad other disease-related causes of mortality at the time, the chances of dying as a result of drinking radon-infused water were relatively low.

Instead, they found the greatest risks associated with drinking the recommended six to eight daily glasses of “revigated” water was from toxic elements—arsenic, lead, vanadium and uranium—dissolved in the water. Although the concentrations varied with the containers and whether the samples were taken from the top of the containers or from the leaden spout, most of the containers exhibited levels of toxic elements in excess of EPA or OSHA recommendations. Especially striking were the samples of exposed water mixed with a mild acid to mimic wine or fruit juice. Ordinary water kept sealed in one of the jars contained two to twenty times the EPA MCL for arsenic, and some samples showed almost twice as much lead and uranium. The acidified water contained 300 times more arsenic and three times more uranium than the EPA MCL.

“For me, it was quite interesting that people at the time were drinking something that they didn’t understand given all that we now know about how harmful these things are to human health,” says Yu. “It’s amazing to me how eager companies were to commercialize new discoveries without a clear understanding of the risks involved.”

* M. Epstein, D.G. Miles Jr., and L.L. Yu. What were they drinking? A critical study of the radium ore revigator. Applied Spectroscopy. Volume 63, Issue 12, Pages 324A-354A and 1315-1442, (December 2009) , pp. 1406-1409(4). DOI: 10.1366/000370209790109003.

Mark Esser | Newswise Science News
Further information:
http://www.nist.gov

More articles from Health and Medicine:

nachricht Organ-on-a-chip mimics heart's biomechanical properties
23.02.2017 | Vanderbilt University

nachricht Researchers identify cause of hereditary skeletal muscle disorder
22.02.2017 | Klinikum der Universität München

All articles from Health and Medicine >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

NASA eyes Pineapple Express soaking California

24.02.2017 | Earth Sciences

New gene for atrazine resistance identified in waterhemp

24.02.2017 | Agricultural and Forestry Science

New Mechanisms of Gene Inactivation may prevent Aging and Cancer

24.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>