Tiny 3-D ultrasound probe guides catheter procedures

Duke University biomedical engineers designed and fabricated the novel ultrasound probe which is powerful enough to provide detailed, 3-D images. The new device works like an insect's compound eye, blending images from 108 miniature transducers working together.

Catheter-based procedures involve snaking instruments through blood vessels to perform various tasks, such as clearing arteries or placing stents, usually with the guidance of x-ray images.

In a series of proof-of-principle experiments in a water tank using simulated vessels, the engineers used the new ultrasound probe to guide two specific procedures: the placement of a filter within a vessel and the placement of a synthetic “patch” for aortic aneurysms. The scientists plan to begin tests of the new system in animals within the year.

“There are no technological barriers left to be overcome,” said Stephen W. Smith, director of the Duke University Ultrasound Transducer Group and senior member of the research team that published the results of its latest experiments online in the journal IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. It is the cover article for the September issue.

“While we have shown that the new probe can work for two types of procedures, we believe that results will be more far-reaching,” Smith said. “There are many catheter-based interventional procedures where 3-D ultrasound guidance could be used, including heart valve replacements and placement of coils in the brain to prevent stroke. Wherever a catheter can go, the probe can go.”

Currently, when maneuvering a catheter through a vessel, physicians rely on x-ray images taken from outside the body and displayed on a monitor to manipulate their instruments. Often, a contrast agent is injected into the bloodstream to highlight the vessel.

“While the images obtained this way are good, some patients experience adverse reactions to the contrast agent,” said research engineer Edward Light, first author of the paper and designer of the new probe. “Also, the images gained this way are fleeting. The 3-D ultrasound guidance does not use x-ray radiation or contrast agents, and the images are real-time and continuous.”

Another benefit is portability, which is an important issue for patients who are too sick to be transported, since x-rays need to be taken in specially equipped rooms, Light said. The 3-D ultrasound machine is on wheels and can be moved easily to a patient's room.

Advances in ultrasound technology have made these latest experiments possible, the researchers said, by generating detailed, 3-D moving images in real-time. The Duke laboratory has a long track record of modifying traditional 2-D ultrasound – like that used to image babies in utero – into the more advanced 3-D scans. After inventing the technique in 1991, the team also has shown its utility in developing specialized catheters and endoscopes for real-time imaging of blood vessels in the heart and brain.

After testing many iterations of the design of the probe, also known as a transducer, the engineers came up with a novel approach – lining the front rim of the catheter sheath with 108 miniature transducers.

“These tiny transducers work together to create one large transducer, working much like the compound eyes of insects,” Light explained.

In the first experiment, the new probe successfully guided the placement of a filter in a simulated vena cava, the large vein that carries deoxygenated blood from the lower extremities to the back to heart. Patients with clots in their legs – known as deep vein thrombosis – who cannot get clot-busting drugs often receive these filters to prevent the clots dislodging and traveling to the heart and lungs.

The second experiment involved the placement of abdominal aorta aneurysm stent grafts, which are large synthetic “tubes” used to patch weakened areas of the aorta that are at risk of bursting.

“I believe we have shown that 3-D ultrasound clearly works in a wide variety of interventional procedures,” Smith said. “We envision a time in the not-too-distant future when this technology becomes standard equipment in various catheter kits.”

Media Contact

Richard Merritt EurekAlert!

More Information:

http://www.duke.edu

All latest news from the category: Medical Engineering

The development of medical equipment, products and technical procedures is characterized by high research and development costs in a variety of fields related to the study of human medicine.

innovations-report provides informative and stimulating reports and articles on topics ranging from imaging processes, cell and tissue techniques, optical techniques, implants, orthopedic aids, clinical and medical office equipment, dialysis systems and x-ray/radiation monitoring devices to endoscopy, ultrasound, surgical techniques, and dental materials.

Back to home

Comments (0)

Write a comment

Newest articles

Lighting up the future

New multidisciplinary research from the University of St Andrews could lead to more efficient televisions, computer screens and lighting. Researchers at the Organic Semiconductor Centre in the School of Physics and…

Researchers crack sugarcane’s complex genetic code

Sweet success: Scientists created a highly accurate reference genome for one of the most important modern crops and found a rare example of how genes confer disease resistance in plants….

Evolution of the most powerful ocean current on Earth

The Antarctic Circumpolar Current plays an important part in global overturning circulation, the exchange of heat and CO2 between the ocean and atmosphere, and the stability of Antarctica’s ice sheets….

Partners & Sponsors