Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Screening breast ultrasound detects cancers missed on mammography in women with dense breasts

18.04.2013
Screening breast ultrasound performed after mammography on women with greater than 50% breast density detects an additional 3.4 cancers or high risk lesions per one thousand woman screened, a detection rate just under that of screening mammography alone for women with less dense breasts, a new study shows. Screening mammography detects 4-5 cancers per thousand women screened.

The study, conducted in conjunction with seven Connecticut radiology practices, included 19,745 women who had dense breasts and "normal" mammograms. Sixty-seven cancers were found, said Dr. Sarah Steenbergen, lead author of the study, who is now at Yale University in New Haven, CT.

"Out of the available surgical reports, only one case had nodal involvement at the time of diagnosis. This suggests that the cancers are detected early and therefore we anticipate a survival benefit," Dr. Steenbergen said.

The study has been conducted over two years, "and we've seen an improvement in the sensitivity of screening breast ultrasound from 96.6% to 100% and in specificity from 94.0% to 96% from the first to the second year," she said.
This illustrates a learning curve, and "we anticipate that as the number of screening breast ultrasounds increase, physicians will be even better able to differentiate benign from malignant lesions," she said.

Recent legislation in Connecticut mandates reporting of breast density on mammograms and recommending follow up screening ultrasound for women with greater than 50% breast density, said Dr. Steenbergen.
The study was conducted, in part, to measure the outcome of this legislation and what we can hope to achieve with screening breast ultrasound, she said.

Dr. Steenbergen will present her study at the ARRS annual meeting on April 18 in Washington, DC.

Samantha Schmidt | EurekAlert!
Further information:
http://www.arrs.org

Further reports about: Screening breast ultrasound mammography

More articles from Medical Engineering:

nachricht Heart examinations: Miniature particle accelerator saves on contrast agents
27.02.2017 | Technische Universität München

nachricht Novel breast tomosynthesis technique reduces screening recall rate
21.02.2017 | Radiological Society of North America

All articles from Medical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Safe glide at total engine failure with ELA-inside

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded after a glide flight with an Airbus A320 in ditching on the Hudson River. All 155 people on board were saved.

On January 15, 2009, Chesley B. Sullenberger was celebrated world-wide: after the two engines had failed due to bird strike, he and his flight crew succeeded...

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

New pop-up strategy inspired by cuts, not folds

27.02.2017 | Materials Sciences

Sandia uses confined nanoparticles to improve hydrogen storage materials performance

27.02.2017 | Interdisciplinary Research

Decoding the genome's cryptic language

27.02.2017 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>