Engineers develop way of detecting problems with artificial hip joints

Engineers at the University of Bath have developed a diagnostic test which measures the frequency of sound produced when the femur bone in the leg is vibrated.

The new method is much more sensitive than the traditional method of using x-rays to detect the loosening of implants, and so can diagnose much smaller gaps around the implanted joint.

Around 50,000 people receive total hip replacements in the UK each year, and many will go on to develop pain from them. It is estimated that within 10 years of having an implant, about a quarter of patients will suffer pain from a loosening of the joint, which are joined to their leg bone by a special cement.

Surgeons find it difficult to know whether this from an infection, which can be cured by antibiotics, or because the joint has loosened, which means surgery is needed. A reliable diagnostic test is vital to save patients undergoing unnecessary surgery.

Dr James Cunningham, of the University of Bath’s Department of Mechanical Engineering, has developed the method of placing a piece of vibrating equipment on to the patient’s knee, which vibrates the femur and the hip joint.

An ultrasound device is attached to the hip and this picks up sound vibrations from the vibrating joint. If the sound’s frequencies are ‘pure’ – a regular wave of increasing and decreasing frequencies – then they know the joint is firmly fastened to the bone. If the sound waves are impure and irregular then they know that the joint has come loose.

“This finding is important because surgeons need to know if the pain the patient is feeling comes from a loose joint needing surgery, or from another cause,” said Dr Cunningham.

“The ultrasound method is better than any other method available now, including the traditional x-ray procedure, which can only pick up a large amount of loosening.”

Dr Cunningham’s work will appear shortly in the journal Medical Engineering and Physics.

Dr Cunningham hopes that the NHS and other medical organisations will use his findings to develop the device for use in hospitals.

Media Contact

Tony Trueman alfa

All latest news from the category: Medical Engineering

The development of medical equipment, products and technical procedures is characterized by high research and development costs in a variety of fields related to the study of human medicine.

innovations-report provides informative and stimulating reports and articles on topics ranging from imaging processes, cell and tissue techniques, optical techniques, implants, orthopedic aids, clinical and medical office equipment, dialysis systems and x-ray/radiation monitoring devices to endoscopy, ultrasound, surgical techniques, and dental materials.

Back to home

Comments (0)

Write a comment

Newest articles

Results for control of pollutants in water

Brazilian scientists tested a simple and sustainable method for monitoring and degrading a mixture of polycyclic aromatic hydrocarbons, compounds present in fossil fuels and industrial waste. An article published in the journal Catalysis…

A tandem approach for better solar cells

Perovskite-based solar cells were first proved in 2009 to have excellent light-absorbing properties of methylammonium lead bromide and methylammonium lead iodide, collectively referred to as lead halide perovskites or, more…

The behavior of ant queens is shaped by their social environment

Specialization of ant queens as mere egg-layers is reversible / Queen behavioral specialization is initiated and maintained by the presence of workers. The queens in colonies of social insects, such…

Partners & Sponsors