Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

First High-Flex Knee Replacement Implant Shaped Specifically to Fit Woman’s Anatomy

11.05.2006


Orthopedic Surgeons at Rush Are Co-Developers of Implant That Focuses on Shape, Not Size

The first knee replacement shaped to fit a woman’s anatomy has received clearance from the U.S. Food and Drug Administration, and will be distributed to orthopedic surgeons to use next week. Dr. Aaron G. Rosenberg and Dr. Richard A. Berger, orthopedic surgeons at Rush University Medical Center, were two of the 10 developer surgeons who sought to address shape-related differences of a woman’s knee.

The Gender Solutions High-Flex Knee, made by Zimmer, Inc, is designed based on three distinct and scientifically documented shape differences between women’s and men’s knees. The implant addresses the shape-related differences typical of a woman’s knee: a narrower shape; thinner shape, and the need for more natural motion for the knee when walking.

"Knee implants have been functioning very well for men and women, but we want to meet women’s unique needs by making knee replacements that feel, fit and function even better," says Rosenberg. "The implant is the best of both worlds. It’s based on the current implant we use, a highly successful implant with great mechanics and 10 years of clinical success. Only the shape of this new implant is different, to make it feel more natural."

The clearance allows Zimmer to begin distributing the implant to U.S. orthopedic surgeons and hospitals as part of Zimmer’s NexGen Complete Knee System. The Gender Solutions Knee will be implanted using existing, clinically successful surgical techniques, including Zimmer’s minimally invasive approaches. Rosenberg and other surgeons who helped with development will be using the implant in patients next week. The implant is expected to be globally available this fall.

The Need for a Woman’s Knee Implant

"Mounting research indicates that a woman’s knee is not simply a smaller version of a man’s knee. The differences involve the bones, ligaments and tendons in the joints," says Rosenberg. "Women can wear men’s clothing and shoes, but most prefer clothing and shoes made for them. It’s the same with knees, and it makes perfect sense to design knee implants with women in mind, particularly considering that women are by far the majority of the knee replacement patient population."

Nearly two-thirds of the more than 400,000 annual knee replacement patients are women, according to the National Center for Health Statistics, and the numbers continue to increase each year. Research shows that while both women and men vastly under use knee replacement, women are three times less likely than men to undergo the procedure, although they suffer from more knee pain and resulting disability.

"Less invasive procedures are helping patients get back to enjoying their lives faster than ever before. Now that we have a knee shaped to fit women’s anatomy, we expect far more women will want to consider knee replacement."

Knee replacements have long been available in many sizes, but merely using a different size for women doesn’t resolve anatomical differences. Various studies show that women’s knees significantly differ in shape from men’s knees. Pioneering research conducted for Zimmer precisely maps out those differences and is the foundation for the design and development of the female implant.

The female implant can be placed using minimally invasive techniques which typically offer smaller scars, shorter hospitalization and quicker rehabilitation and recovery; and safely accommodates high flexion (up to 155 degrees), which is necessary for many activities, such as climbing stairs, sitting in a chair, gardening and golfing.

The knee joint is composed of three bones: the end of the femur (thighbone), the top of the tibia (shinbone) and the patella (kneecap), which are all held together by tendons and ligaments and cushioned by cartilage. Knees can become painful, due to arthritis, injury and infection, which cause deterioration of the cartilage. When the cartilage is gone, the bones of the knee grind against each other, wearing away and typically causing severe pain. Total knee replacement involves removing the portion of bone that is damaged and resurfacing the knee with metal and plastic implants.

Historically, implants used for knee replacement have been designed based upon an average between the size of women’s and men’s knees. Total knee replacement is a highly successful surgery, strongly supported by more than 20 years of follow-up data, according to the National Institutes of Health (NIH) consensus statement on total knee replacement released in February 2004. The NIH consensus panel concluded that total knee replacement provides substantial improvement in patients’ pain, functional status, and overall health-related quality of life in about nine out of 10 patients.

Three Distinct Differences

The Gender Solutions implant addresses the following research-documented, shape-related differences of a woman’s knee:

Narrower Shape, Proportioned to Female Anatomy: When determining the appropriate-sized implant, surgeons measure the end of the femur from front to back and from side to side. Women’s knees typically are narrower from side to side, and are more trapezoid-shaped, whereas men’s knees are more rectangle-shaped. Surgeons typically choose the implant size based on the front-to-back measurement, which is key in allowing the knee to move and flex properly. However, an implant that fits a woman’s knee from front to back often will be too wide from side to side, leading to the implant overhanging the bone and potentially pressing on, or damaging, surrounding ligaments and tendons, possibly causing pain. The Gender Solutions knee is proportionally contoured to the entire bone to provide a more precise fit.

Thinner Shape: The bone in the front of a woman’s knee is typically less prominent than in a man’s knee. Therefore, when a traditional implant is used to replace the damaged bone, the joint may end up feeling and functioning better than before surgery but still feel "bulky," which may result in pain and decrease optimal function. This implant is thinner in shape in the front so the knee replacement more appropriately matches the natural female anatomy.

More Natural Tracking: The angle between the pelvis and the knee affects how the kneecap tracks over the end of the femur as the knee moves through a range of motion. Women tend to have a different angle than men due to their specific shape and contour. The Gender Solutions Knee Implant was designed to accommodate the different tracking angle and function more like a woman’s natural knee.

Mary Ann Schultz | EurekAlert!
Further information:
http://www.rush.edu

More articles from Medical Engineering:

nachricht Novel breast tomosynthesis technique reduces screening recall rate
21.02.2017 | Radiological Society of North America

nachricht Biocompatible 3-D tracking system has potential to improve robot-assisted surgery
17.02.2017 | Children's National Health System

All articles from Medical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Microhotplates for a smart gas sensor

22.02.2017 | Power and Electrical Engineering

Scientists unlock ability to generate new sensory hair cells

22.02.2017 | Life Sciences

Prediction: More gas-giants will be found orbiting Sun-like stars

22.02.2017 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>