Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Cardio-Thoracic Center of Monaco is the first Siemens European Reference Center

21.09.2010
Joint press release of Siemens and Monaco Cardio-Thoracic Center

Today, Siemens Healthcare and the Cardio-Thoracic Center of Monaco (CCM) signed a partnership contract in Monaco. Within the framework of this contract, CCM was nominated the first “Siemens European Reference Center Cardiovascular Medicine".

The strategic partnership is dedicated to the entire spectrum of cardiovascular medicine with the objective to develop innovative solutions for the treatment of patients suffering from cardiovascular diseases. The effects of Siemens medical technologies on the quality and efficiency of diagnosis and therapy are already today reflected at the CCM. In the future, the reference center will also serve as an international training and visitors' platform that demonstrates optimized clinical workflows and advanced multi-modality imaging to healthcare providers.

The Cardio-Thoracic Center of Monaco is a hospital of 50 beds specialized in the medical and surgical treatment of cardio-thoracic and vascular diseases. Recognized for its advanced treatment methods and modern equipment, the hospital is highly regarded in its field. Of international scope, the CCM treats patients from all over the world and allows physicians to access international fellowship programs – a training on the most modern diagnostic and therapeutic technologies.

Compared to more conventional medical institutions CCM foregoes department-specific structures. Since its creation in 1987, multidisciplinary cooperation has been at the heart of the CCM’s philosophy*. Today more than ever, the entire team of cardiologists, anesthesiologists and vascular surgeons, and works together to provide every single patient with the best diagnosis, therapy and medical outcome possible.

The objective of the partnership between CCM and Siemens is to establish and disseminate clinical know-how, optimize processes as well as create innovative treatment concepts. The upcoming projects will concentrate on clinical solutions that focus on individual disease patterns and include the entire clinical workflow. The Clinical Competence Center Cardiology of Siemens coordinates these direct interactions in the clinical field. The mutual findings will be incorporated in future developments by Siemens.

“To be nominated Siemens European Reference Center is not only an honor for us, it also allows us to advance the findings of our years of effort, that is in the diagnosis and therapy for cardiovascular disease and move on to new, extraordinary paths", says Professor Vincent Dor, CEO of CCM. “We are delighted that our excellent cooperation with Siemens for the past 25 years will be further strengthened by this strategic partnership.”

“The outstanding ranking CCM holds in the field of cardiovascular diseases is further emphasized by naming CCM a “Siemens European Reference Center Cardiovascular Medicine“, says Tom Miller, CEO of the Customer Solutions Division at Siemens Healthcare. “Professor Dor and the entire team of physicians at CCM treat the disease pattern of a patient across disciplines. The effective diagnostic and therapeutic process using imaging technologies and incorporating them into efficient processes plays a central role. Siemens has been successfully supporting CCM for more than 25 years with the company’s systems and know-how.”

Centre Cardio-Thoracique de Monaco (CCM): Since its forecast in 1984, physicians and managers of CCM have organized, with Siemens, their scheduled and anticipated medical equipment for this hospital devoted to treat all types of patients and diseases in the field of cardio-thoracic and vascular pathologies.

Two, of the main reasons of successes and satisfactions, were:

1. Since 1990, the realization of a hybrid angio-surgical room cath-lab,

2. Since 2002, the complement of non invasive diagnostic facilities by a “cardiologist driven” MR consol

The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. Siemens Healthcare employs some 48,000 employees worldwide and operates around the world. In fiscal year 2009 (to September 30), the Sector posted revenue of 11.9 billion euros and profit of around 1.5 billion euros.

Bianca Braun | Siemens Healthcare
Further information:
http://www.ccm.mc
http://www.siemens.com/healthcare

More articles from Medical Engineering:

nachricht Novel breast tomosynthesis technique reduces screening recall rate
21.02.2017 | Radiological Society of North America

nachricht Biocompatible 3-D tracking system has potential to improve robot-assisted surgery
17.02.2017 | Children's National Health System

All articles from Medical Engineering >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Breakthrough with a chain of gold atoms

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

In the field of nanoscience, an international team of physicists with participants from Konstanz has achieved a breakthrough in understanding heat transport

Im Focus: DNA repair: a new letter in the cell alphabet

Results reveal how discoveries may be hidden in scientific “blind spots”

Cells need to repair damaged DNA in our genes to prevent the development of cancer and other diseases. Our cells therefore activate and send “repair-proteins”...

Im Focus: Dresdner scientists print tomorrow’s world

The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden (AMCD) with a festive ceremony on February 7, 2017. Scientists from various disciplines perform research on materials, additive manufacturing processes and innovative technologies, which build up components in a layer by layer process. This technology opens up new horizons for component design and combinations of functions. For example during fabrication, electrical conductors and sensors are already able to be additively manufactured into components. They provide information about stress conditions of a product during operation.

The 3D-printing technology, or additive manufacturing as it is often called, has long made the step out of scientific research laboratories into industrial...

Im Focus: Mimicking nature's cellular architectures via 3-D printing

Research offers new level of control over the structure of 3-D printed materials

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being...

Im Focus: Three Magnetic States for Each Hole

Nanometer-scale magnetic perforated grids could create new possibilities for computing. Together with international colleagues, scientists from the Helmholtz Zentrum Dresden-Rossendorf (HZDR) have shown how a cobalt grid can be reliably programmed at room temperature. In addition they discovered that for every hole ("antidot") three magnetic states can be configured. The results have been published in the journal "Scientific Reports".

Physicist Dr. Rantej Bali from the HZDR, together with scientists from Singapore and Australia, designed a special grid structure in a thin layer of cobalt in...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Booth and panel discussion – The Lindau Nobel Laureate Meetings at the AAAS 2017 Annual Meeting

13.02.2017 | Event News

Complex Loading versus Hidden Reserves

10.02.2017 | Event News

International Conference on Crystal Growth in Freiburg

09.02.2017 | Event News

 
Latest News

Stingless bees have their nests protected by soldiers

24.02.2017 | Life Sciences

New risk factors for anxiety disorders

24.02.2017 | Life Sciences

MWC 2017: 5G Capital Berlin

24.02.2017 | Trade Fair News

VideoLinks
B2B-VideoLinks
More VideoLinks >>>