Forum for Science, Industry and Business
Sponsored by:     Siemens     3M    n-tv
Search our Site:

Topic (optional):

 

Home Reports Materials Sciences Content

New thermoelectric material could be an energy saver

next article
28.11.2012

Energy savings - easy as dirt, heat, pressure

 

By using common materials found pretty much anywhere there is dirt, a team of Michigan State University researchers have developed a new thermoelectric material.

This is important, they said, because the vast majority of heat that is generated from, for example, a car engine, is lost through the tail pipe. It’s the thermoelectric material’s job to take that heat and turn it into something useful, like electricity.

The researchers, led by Donald Morelli, a professor of chemical engineering and materials science, developed the material based on natural minerals known as tetrahedrites.

“What we’ve managed to do is synthesize some compounds that have the same composition as natural minerals,” said Morelli, who also directs MSU’s Center for Revolutionary Materials for Solid State Energy Conversion. “The mineral family that they mimic is one of the most abundant minerals of this type on Earth – tetrahedrites.

“By modifying its composition in a very small way, we produced highly efficient thermoelectric materials.”

The search to develop new thermoelectric materials has been ongoing. Morelli said that while some new, more efficient materials have been discovered as of late, many of those are not suitable for large-scale applications because they are derived from rare or sometimes toxic elements, or the synthesis procedures are complex and costly.

“Typically you’d mine minerals, purify them into individual elements, and then recombine those elements into new compounds that you anticipate will have good thermoelectric properties,” he said. “But that process costs a lot of money and takes a lot of time. Our method bypasses much of that.”

The MSU researchers’ method involves the use of very common materials, grinding them to a powder, then using pressure and heat to compress into useable sizes.

“It saves tremendously in terms of processing costs,” he said.

The researchers expect this discovery could pave the way to many new, low-cost thermoelectric generation opportunities with applications that include waste heat recovery from industrial power plants, conversion of vehicle exhaust gas heat into electricity, and generation of electricity in home-heating furnaces.

The research was published in the online journal Advanced Energy Materials.

The work is supported by a grant from the U.S. Department of Energy/Office of Science. The work is a partnership with the University of Michigan and UCLA. Other institutions involved with the MSU-based center are Northwestern University, the Ohio State University, Wayne State University and Oak Ridge National Laboratory.

For more information on the Center for Revolutionary Materials for Solid State Energy Conversion, visit www.egr.msu.edu/efrc/about-us%20.

Tom Oswald | Source: EurekAlert!
Further information: www.msu.edu

next article

More articles from Materials Sciences:

nachricht Printing artificial bone
18.06.2013 | Massachusetts Institute of Technology

nachricht Coatings Could Help Medical Implants Function Better
18.06.2013 | University of Alabama Huntsville

All articles from Materials Sciences >>>
The most recent press releases about innovation >>>

Overview of the latest five Focus news of the innovations-report:
In the focus: EADCO and PC-Aero present at the Paris Airshow for the first time the full electric 6 seats ....

... two engines aircraft project “Elektro E6”.

The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.

EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...

In the focus: Ceramic Transformer Integrates Power Supply Unit

Siemens scientists have developed new kinds of ceramics in which they can embed transformers.

The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.

The new technology was developed in cooperation with industrial and research partners who ...

In the focus: Nanoparticle Opens the Door to Clean-Energy Alternatives

Cheaper clean-energy technologies could be made possible thanks to a new discovery.

Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...

In the focus: Fraunhofer ILT heads toward digital photonic production

The Fraunhofer Institute for Laser Technology ILT generated a lot of interest at the LASER World of Photonics 2013 trade fair with its numerous industrial laser technology innovations.

Its highlights included beam sources and manufacturing processes for ultrashort laser pulses as well as ways to systematically optimize machining processes using computer simulations. There was even a specialist booth at the fair dedicated to the revolutionary technological potential of digital photonic production.

Now in its fortieth year, LASER World ...

In the focus: New quantum dot technique combines best of optical and electron microscopy

It's not reruns of "The Jetsons", but researchers working at the National Institute of Standards and Technology (NIST) have developed a new microscopy technique that uses a process similar to how an old tube television produces a picture—cathodoluminescence—to image nanoscale features.

Combining the best features of optical and scanning electron microscopy, the fast, versatile, and high-resolution technique allows scientists to view surface and subsurface features potentially as small as 10 nanometers in size.

The new microscopy technique, described in the journal AIP Advances,* uses a beam of electrons to excite a specially ...

All Focus news of the innovations-report >>>

B2B Search

Product / Service
Company / Organisation

Latest News

Printing artificial bone

18.06.2013 | Materials Sciences

Artificial Sweetener a Potential Treatment for Parkinson's Disease

18.06.2013 | Health and Medicine

New way to improve antibiotic production

18.06.2013 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>

Event News

International Symposium on Morphogenesis

14.06.2013 | Event News

ESMT Annual Forum: CEOs discuss “The Future of Jobs” with international academics and policymakers

13.06.2013 | Event News

Invitation: Mathematics for Industry and Society in the French Embassy Berlin, 04. - 05.07.2013

10.06.2013 | Event News