Superb conductors of heat and infinitesimal in size, carbon nanotubes might be used to prevent overheating in next-generation computing devices or as fillers to enhance thermal conductivity of insulating materials, such as durable plastics or engine oil. But a research team at Rensselaer Polytechnic Institute has discovered that the nanotubes’ role as thermal superconductors is greatly diminished when mixed with materials such as polymers that make up plastics.
“Carbon nanotubes are superior thermal conductors by themselves. But, that doesn’t mean they will exhibit the same level of high conductivity when integrated into other materials,” says Pawel Keblinski, assistant professor of materials science and engineering and head of Rensselaer’s research team. His team’s research is published in this month’s issue of Nature Materials.
A global team of researchers was optimistic when a one-percent fraction of carbon nanotubes was added to epoxy and other organic materials, and the thermal conductivity of the newly created composites increased two- or threefold. But, using conventional engineering estimates, Keblinski noted that the composites’ conductivity should have had 50-fold increases.
Why such disparity between the experiment and the expectations?
“Atoms forming stiff carbon nanotubes vibrate at much higher frequencies than the atoms in the surrounding material. This leads to high interfacial resistance for the heat flow between the tubes and the other elements,” Keblinski says.
Energy exchange between two different elements is immediate and plentiful when frequencies in both are similar. Interfacial resistance happens when the frequencies are different, and the heat energy has a difficult time taking the leap from one element to the next.
To test the magnitude of the problem, Keblinski and his Rensselaer collaborators performed computer simulations on a model nanotube composite. Meanwhile, another research group headed by David Cahill at the University at Illinois at Urbana Champaign, heated real carbon nanotubes with a laser.
From the rate of cooling, in both the simulation and the physical experiment, the researchers derived the value of the interfacial resistance. In both instances, they found the resistance is so high that it limits the thermal conductivity of the nanotubes.
One way to reduce the interfacial resistance in such nanocomposites is to induce a stronger bond between the nanotube and other materials to make it easier for heat to cross from one element to the next. However, extensive bonding may distort the original nanotube structure that allows the tubes to be a superconductor of heat in the first place.
Still, Keblinski is optimistic about the use of carbon nanotubes to improve insulating materials. “By adding a small fraction of carbon nanotubes to such materials, we can still increase the thermal as well as electrical conductivity. So, although we may have to lower our expectations, we have not given up hope quite yet that nanotubes will improve materials for a number of applications,” Keblinski says.
Rensselaer Polytechnic Institute, founded in 1824, is the nation’s oldest technological university. The school offers degrees in engineering, the sciences, information technology, architecture, management, and the humanities and social sciences. Institute programs serve undergraduates, graduate students, and working professionals around the world. Rensselaer faculty are known for pre-eminence in research conducted in a wide range of research centers that are characterized by strong industry partnerships. The Institute is especially well known for its success in the transfer of technology from the laboratory to the marketplace so that new discoveries and inventions benefit human life, protect the environment, and strengthen economic development.
Jodi Ackerman | Source: Rensselaer News
More articles from Materials Sciences:
New optimized coatings for implants reduce risk of infection
19.12.2013 | Aalto University, Finland
Crystal film growth: nanosheets extend epitaxial growth applications
19.12.2013 | International Center for Materials Nanoarchitectonics (MANA)
Swimming microengines made from platinum and iron are highly efficient in removing organic pollutants from water using hydrogen peroxide.
Researchers from the Max Planck Institute for Intelligent Systems in Stuttgart have developed a new method for the active degradation of organic pollutants in solution by using swimming microengines.
The mobile microcleaners consist of an outer iron and an inner platinum layer, thereby combining two functionalities. Hydrogen peroxide, which must be ...
A 12-year study of massive stars has reaffirmed that our Galaxy has four spiral arms, following years of debate sparked by images taken by NASA's Spitzer Space Telescope that only showed two arms.
The new research, which is published online today [17 December] in the Monthly Notices of the Royal Astronomical Society, is part of the RMS Survey, which was launched by academics at the University of Leeds.
Astronomers cannot see what our Galaxy, which is called the Milky Way, looks like because we ...
In collaboration with the University of Basel, an international team of researchers has observed a strong energy loss caused by frictional effects in the vicinity of charge density waves.
This may have practical significance in the control of nanoscale friction. The results have been published in the scientific journal Nature Materials.
Friction is often seen as an adverse phenomenon that leads to wear and causes energy loss. Conversely, however, too little friction can be a disadvantage as well – ...
A new type of transistor that could make possible fast and low-power computing devices for energy-constrained applications such as smart sensor networks, implantable medical electronics and ultra-mobile computing is feasible, according to Penn State researchers.
Called a near broken-gap tunnel field effect transistor (TFET), the new device uses the quantum mechanical tunneling of electrons through an ultrathin energy barrier to provide high current at low voltage.
Penn State, the National Institute of Standards and Technology and IQE, a specialty wafer manufacturer, jointly presented their findings at ...
The team of Johannes Zuber at the IMP in Vienna, Austria, managed to overcome remaining key limitations of RNA interference (RNAi) - a unique method to specifically shut off genes.
By using an optimized design, the scientists were able to inhibit genes with greatly enhanced efficiency and accuracy. The new method facilitates the search for drug targets and improves the interpretation of experimental results.
The IMP will make this „RNAi toolkit“ available to researchers. Results of the study are published in ...
19.12.2013 | Life Sciences
19.12.2013 | Health and Medicine
19.12.2013 | Materials Sciences
19.12.2013 | Event News
11.12.2013 | Event News
10.12.2013 | Event News