Applications for superconducting wires, which carry electricity without resistance when cooled to a critical temperature, include underground transmission cables, transformers and large-scale motors and generators. But these applications require wires to operate under different temperature and magnetic field regimes.
A team led by ORNL’s Amit Goyal demonstrated that superconducting wires can be tuned to match different operating conditions by introducing small amounts of non-superconducting material that influences how the overall material behaves. Manipulating these nanoscale columns -- also known as defects -- allows researchers to exert control over the forces that regulate the wires’ superconducting performance. The team’s findings are published in Nature Publishing Group’s Scientific Reports.
“Not only can we introduce these nanocolumn defects within the superconductor and get enhanced performance, but we can optimize the performance for different application regimes by modifying the defect spacing and density,” Goyal said.
A wire sample grown with this process exhibited unprecedented performance in terms of engineering critical current density, which measures the amount of current the wire can carry per unit cross-sectional area. This metric more accurately reflects the real-world capabilities of the material because it takes into account the wire’s non-superconducting components such as the substrate and the buffer and stabilizer layers, Goyal said.
“We report a record performance at 65 Kelvin and 3 Tesla, where most rotating machinery applications like motors and generators are slated to operate,” he said.
The paper reports a minimum engineering critical current density at all applied magnetic field orientations of 43.7 kiloamperes/cm2, which is more than twice the performance level needed for most applications. This metric assumes the presence of a 50-micron-thick copper stabilizer layer required in applications.
Generating defects in the superconductor is accomplished through an ORNL-developed self-assembly process, which enables researchers to design a material that automatically develops the desired nanoscale microstructure during growth.
The mechanism behind this process, which adds very little to the production cost, was the subject of a recently published study by a team led by Goyal in Advanced Functional Materials.
“When you’re making the wires, you can dial-in the properties because the defects self-assemble,” Goyal said. “You change the composition of the superconductor when you’re depositing the tape.”
Goyal, who has collaborated with multiple superconducting technology companies, hopes the private sector will incorporate the team’s findings to improve upon existing products and generate new applications.
The study is published as “Engineering nanocolumnar defect configurations for optimized vortex pinning in high temperature superconducting nanocomposite wires.” Co-authors are ORNL’s Sung Hun Wee and Claudia Cantoni and the University of Tennessee’s Yuri Zuev.
The research was sponsored by DOE’s Office of Electricity Delivery and Energy Reliability. The research was supported by ORNL's Shared Research Equipment (ShaRE) User Program, which is sponsored by DOE’s Office of Science.
ORNL is managed by UT-Battelle for the Department of Energy's Office of Science. DOE's Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit http://science.energy.gov.
Morgan McCorkle | Source: EurekAlert!
Further information: www.ornl.gov
More articles from Materials Sciences:
A new material for solar panels could make them cheaper, more efficient
12.12.2013 | DOE/Argonne National Laboratory
Pioneering Path to Electrical Conductivity in ‘Tinker Toy’ Materials to Appear in Science
11.12.2013 | Sandia National Laboratories
A unique solar panel design made with a new ceramic material points the way to potentially providing sustainable power cheaper, more efficiently, and requiring less manufacturing time.
It also reaches a four-decade-old goal of discovering a bulk photovoltaic material that can harness energy from visible and infrared light, not just ultraviolet light.
Scaling up this new design from its tablet-size prototype to a full-size solar panel would be a large step toward making solar power affordable compared with ...
Atlantische Flohkrebse pflanzen sich jetzt auch in arktischen Gewässern fort
Biologen des Alfred-Wegener-Institutes, Helmholtz-Zentrum für Polar- und Meeresforschung (AWI), haben zum ersten Mal nachgewiesen, dass sich in den arktischen Gewässern westlich Spitzbergens auch Flohkrebse aus dem wärmeren Atlantik fortpflanzen.
Diese überraschende Entdeckung deute auf einen möglichen Wandel der arktischen Zooplankton-Gemeinschaft hin, berichten die Wissenschaftler und Wissenschaftlerinnen in der Fachzeitschrift Marine Ecology ...
The molecular architecture of three key proteins and their complexes reveals how plants fine-tune their immune response to pathogens
Plants rarely get sick in their natural environment. When the threat of infection arises, a quick decision is made about the necessary countermeasures. The course is set by a protein which forms complexes with its partner proteins for this purpose.
Jane Parker from the Max Planck Institute for Plant Breeding ...
Researchers studying speciation of butterfly orchids on the Azores have been startled to discover that the answer to a long-debated question "Do the islands support one species or two species?" is actually "three species".
Hochstetter's Butterfly-orchid, newly recognized following application of a battery of scientific techniques and reveling in a complex taxonomic history worthy of Sherlock Holmes, is arguably Europe's rarest orchid species. Under threat in its mountain-top retreat, the orchid urgently requires conservation recognition.
A lavishly illustrated publication, titled "Systematic revision of Platanthera in ...
Researchers from Brown University and the University of Hawaii have found some mineralogical surprises in the Moon's largest impact crater.
Data from the Moon Mineralogy Mapper that flew aboard India's Chandrayaan-1 lunar orbiter shows a diverse mineralogy in the subsurface of the giant South Pole Aitken basin.
The differing mineral signatures could be reflective of the minerals dredged up at the time of the giant impact 4 billion years ago, ...
12.12.2013 | Life Sciences
12.12.2013 | Earth Sciences
12.12.2013 | Studies and Analyses
11.12.2013 | Event News
10.12.2013 | Event News
05.12.2013 | Event News