According to Charles Schroeder, an assistant professor in the Department of Chemical and Biomolecular Engineering, the results show that peptide precursor materials can be aligned and oriented during their assembly into polypeptides using tailored flows in microfluidic devices.
The research was a collaboration between the labs of Schroeder and William Wilson, a research professor in materials science and engineering and the Frederick Seitz Materials Research Laboratory at Illinois. Their findings were recently published in a paper entitled, “Fluidic-directed assembly of aligned oligopeptides with pi-conjugated cores” in Advanced Materials.
“A grand challenge in the field of materials science is the ability to direct the assembly of advanced materials for desired functionality,” says Amanda Marciel, a graduate student in Schroeder’s research group. “However, design of new materials is often hindered by our inability to control the structural complexity of synthetic polymers.”
“To address the need for controlled processing of functional materials, we developed a microfluidic-based platform to drive the assembly of synthetic oligopeptides,” Marciel explained. “Using a microfluidic device, we assembled DFAA and DFAG into one dimensional nanostructures using a planar extensional flow generated in a cross-slot geometry.”
The dynamics of the assembly process can be followed in real-time using fluorescence microscopy and spectroscopy.
“The assembled nanostructure is spectrally distinct from the synthetic oligopeptide monomer, which can be used to monitor the dynamics of nanostructure formation,” Marciel added. “Using precise hydrodynamic control of the microfluidic platform, the researchers demonstrated the formation of multiple parallel-aligned synthetic oligopeptide nanostructures and their subsequent disassembly. By modulating volumetric flow rates in the device they were able to manipulate the position of the fluid-fluid interface at the microchannel junction.
During this process, nanostructures initially formed at the reactive laminar interface are submerged into the advancing acidic stream, thereby preserving the integrity of the preformed nanostructures while initiating formation of an aligned nanostructure at the new interface position.
Marciel says this research shows that is possible to use microfluidic-based flows to direct the structural assembly of polymers into functional materials.
“Our approach has the potential to enable reproducible and reliable fabrication of advanced materials.” Marciel said. “Achieving nanoscale ordering in assembled materials has become the primary focus of recent efforts in the field. These approaches will ultimately lead to desired morphology in functional materials, which will enhance their ability to capture and store energy.”
“Our research team is quite interdisciplinary and has a unique range of skills to study materials assembly,” Schroeder said. “Our group has extensive experience in the design and fabrication of microfluidic devices and fluorescence imaging of soft materials." The team’s ultimate goal is to assemble the organic equivalent of typical semiconducting materials.
“This would open the door to developments of materials with application to photovoltaic devices, solid-state lighting, energy harvesting, and catalytic processes,” she said.
In addition to Marciel, Schroeder, and Wilson, the paper's authors included, Melikhan Tanyeri, Brian D. Wall, and John D. Tovar. The team used spectroscopic and analytical tools at the Frederick Seitz Materials Research Lab to conduct its research.
Contact: Charles M. Schroeder, Department of Chemical & Biomolecular Engineering, University of Illinois at Urbana-Champaign, 217/333-3906.
Writer: Sarah Williams, assistant director of communications, Department of Chemical and Biomolecular Engineering, 217/244-0541.
Charles Schroeder | Source: University of Illinois
Further information: www.illinois.edu
More articles from Materials Sciences:
New Effect Couples Electricity and Magnetism in Materials
28.11.2013 | Vienna University of Technology
Polymer gel, heal thyself: University of Pittsburgh engineering team proposes new composites that can regenerate when damaged
27.11.2013 | University of Pittsburgh
NASA's Hurricane and Severe Storms Sentinel airborne mission known as HS3 wrapped up for the 2013 Atlantic Ocean hurricane season at the end of September, and had several highlights. HS3 will return to NASA’s Wallops Flight Facility in Wallops Island, Va., for the 2014 Atlantic hurricane season.
During the 2013 mission, two unmanned Global Hawks flew from Wallops for the first time. The mission highlights included studying the Saharan Air Layer, following the genesis of a tropical storm, finding a unique hybrid core or center circulation in a redeveloped storm, obtaining measurements on the strongest side of ...
Nanosponges that soak up a dangerous pore-forming toxin produced by MRSA (methicillin-resistant Staphylococcus aureus) could serve as a safe and effective vaccine against this toxin.
This "nanosponge vaccine" enabled the immune systems of mice to block the adverse effects of the alpha-haemolysin toxin from MRSA—both within the bloodstream and on the skin. Nanoengineers from the University of California, San Diego described the safety and efficacy of this nanosponge vaccine in the December 1 issue of ...
Max Planck researchers are able to reveal the spatial structure of chiral molecules
Small difference, large effect: Most biological molecules occur in two variants, an original and its mirror image. As a result, they are related to one another like the left hand to the right.
For instance, the left- and right-handed variant of the same molecule makes lemons smell different from oranges. ...
Scientists at MPQ develop a new model for realizing the Fractional Quantum Hall Effect in lattice systems
It is fascinating how quantum mechanical behaviour of particles at smallest scales can give rise to strange properties that can be observed in the classical world. One example is the Fractional Quantum Hall Effect (FQH) that was discovered about 30 years ago in semiconductor devices.
It is one of the ...
When a chair leg breaks or a cell phone shatters, either must be repaired or replaced. But what if these materials could be programmed to regenerate-themselves, replenishing the damaged or missing components, and thereby extend their lifetime and reduce the need for costly repairs?
That potential is now possible according to researchers at the University of Pittsburgh Swanson School of Engineering, who have developed computational models to design a new polymer gel that would enable complex materials to regenerate themselves.
The article, "Harnessing Interfacially-Active Nanorods to Regenerate Severed Polymer Gels" (DOI: 10.1021/nl403855k), was published ...
03.12.2013 | Health and Medicine
03.12.2013 | Information Technology
03.12.2013 | Ecology, The Environment and Conservation
12.11.2013 | Event News
29.10.2013 | Event News
18.10.2013 | Event News