The electrocatalytic activity of heteroatom-doped carbon-based nanomaterials has become a growing interest in the past few years due to their potential applications for fuel cells and metal-air batteries.
Several approaches currently exist for the doping of heteroatoms into graphitic structure, but these suffer from high manufacturing costs and technical difficulties.
Researchers at Ulsan National Institute of Science and Technology (UNIST) have come up with a simple, but efficient and eco-friendly alternative which sees the production of edge-selectively functionalized graphene nanoplatelets (EFGnPs) via a dry ball milling graphite in the presence of various gases. The dry ball mill is effectively a type of grinder, traditionally use to grind ores, chemicals and other raw materials into fine powder. It can also be used on a atomic level, as is the case when producing EFGnPs.
Due to the versatility of mechanochemical reactions driven by ball milling, various functional groups could be introduced to the broken edges of graphene nanoplatelets (GnPs) in the presence of appropriate chemical vapors, liquids, or solids in the ball-mill crusher.
The mechanism of edge-selective functionalization in the ball-milling process involves the reaction between reactive carbon species generated by a mechanochemical cleavage of graphitic C-C bonds and gases in a sealed ball-mill crusher. The dormant active carbon species, which remain unreactive in the crusher, could be terminated by subsequent exposure to air moisture. As a result, some oxygenated groups, such as hydroxyl (-OH) and carboxylic acid (-COOH), can be introduced at the broken edges of the preformed EFGnPs with minimal basal plane distortion.
A scanning electron microscope (SEM) is used to demonstrate the mechanochemical cracking of a large grain sized piece of graphite into a small grain size of EFGnPs. Due to the reaction between the newly formed active carbon species at the broken edges of the GnPs and corresponding gases, the ball milling and subsequent workup procedures were found to increase the weight of all the resultant EFGnPs with respect to the graphite starting material. These results indicated that the mechanochemical functionalization of graphite was efficient. The resultant EFGnPs are active enough for the oxygen reduction reaction (ORR) in fuel cells, and hence they will make expensive platinum (Pt)-based electrocatalysts to take a back seat.
Jong-Beom Baek, professor and director of the Interdisciplinary School of Green Energy/Low-Dimensional Carbon Materials Center at UNIST commented:
“We have developed a simple, but versatile ball-milling process to efficiently exfoliate the pristine graphite directly into EFGnPs. Various microscopic and spectroscopic measurements were performed to confirm the reaction mechanisms for the edge functionalization of graphite by ball milling in the presence of corresponding gases and their superior slectrocatalytic activities of the ORR,” said Prof. Baek.
This research was funded by the Ministry of Education, Science and Technology (Minister Lee Ju-Ho) through the National Research Foundation of Korea (President Seung Jong Lee) and published in Journal of the American Chemical Society (Title: Large-scale production of edge-selectively functionalized graphene nanoplatelets via ball-milling and their use as metal-free electrocatalysts for oxygen reduction reaction).
In-Yup Jeon, Hyun-Jung Choi, Sun-Min Jung, Jeong-Min Seo, Min-Jung Kim, Liming Dai, and Jong-Beom Baek 2013. Large-scale production of edge-selectively functionalized graphene nanoplatelets via ball-milling and their use as metal-free electrocatalysts for oxygen reduction reaction" Journal of the American Chemical Society, 135(4): 1386–1393 (direct link below)
Journal of American Chemical Society
the Ministry of Education, Science and Technology (Minister Lee Ju-Ho) through the National Research Foundation of Korea (President Seung Jong Lee)
Further Reports about: active carbon > chemical engineering > chemical reaction > EFGnPs > graphene > information technology > Large Hadron Collider > Nanoplatelets > oxygen reduction reaction > raw material > spectroscopic measurement > UNIST
More articles from Materials Sciences:
New optimized coatings for implants reduce risk of infection
19.12.2013 | Aalto University, Finland
Crystal film growth: nanosheets extend epitaxial growth applications
19.12.2013 | International Center for Materials Nanoarchitectonics (MANA)
Swimming microengines made from platinum and iron are highly efficient in removing organic pollutants from water using hydrogen peroxide.
Researchers from the Max Planck Institute for Intelligent Systems in Stuttgart have developed a new method for the active degradation of organic pollutants in solution by using swimming microengines.
The mobile microcleaners consist of an outer iron and an inner platinum layer, thereby combining two functionalities. Hydrogen peroxide, which must be ...
A 12-year study of massive stars has reaffirmed that our Galaxy has four spiral arms, following years of debate sparked by images taken by NASA's Spitzer Space Telescope that only showed two arms.
The new research, which is published online today [17 December] in the Monthly Notices of the Royal Astronomical Society, is part of the RMS Survey, which was launched by academics at the University of Leeds.
Astronomers cannot see what our Galaxy, which is called the Milky Way, looks like because we ...
In collaboration with the University of Basel, an international team of researchers has observed a strong energy loss caused by frictional effects in the vicinity of charge density waves.
This may have practical significance in the control of nanoscale friction. The results have been published in the scientific journal Nature Materials.
Friction is often seen as an adverse phenomenon that leads to wear and causes energy loss. Conversely, however, too little friction can be a disadvantage as well – ...
A new type of transistor that could make possible fast and low-power computing devices for energy-constrained applications such as smart sensor networks, implantable medical electronics and ultra-mobile computing is feasible, according to Penn State researchers.
Called a near broken-gap tunnel field effect transistor (TFET), the new device uses the quantum mechanical tunneling of electrons through an ultrathin energy barrier to provide high current at low voltage.
Penn State, the National Institute of Standards and Technology and IQE, a specialty wafer manufacturer, jointly presented their findings at ...
The team of Johannes Zuber at the IMP in Vienna, Austria, managed to overcome remaining key limitations of RNA interference (RNAi) - a unique method to specifically shut off genes.
By using an optimized design, the scientists were able to inhibit genes with greatly enhanced efficiency and accuracy. The new method facilitates the search for drug targets and improves the interpretation of experimental results.
The IMP will make this „RNAi toolkit“ available to researchers. Results of the study are published in ...
19.12.2013 | Life Sciences
19.12.2013 | Health and Medicine
19.12.2013 | Materials Sciences
19.12.2013 | Event News
11.12.2013 | Event News
10.12.2013 | Event News