One sample consisted essentially of a single thin layer of ferromagnetic nickel. By contrast, a second sample of this same nickel material was coated with a non-magnetic layer of gold.
Only a mere 30 nanometers (10-9 m) thick, the gold layer swallowed up the lion's share of the laser light so that barely any light ended up reaching the nickel layer. In spite of this, the nickel layer's magnetization rapidly dissipated shortly after the laser pulse entered each sample. However, in the case of the gold-coated sample, the researchers recorded a split-second delay. The observations were based on measurements obtained using circularly polarized femtosecond x-ray pulses at BESSY II, Berlin's own electron storage ring, with the help of the femtoslicing beamline.
"This allowed us to demonstrate experimentally that during this process, it isn't the light itself that is responsible for the ultrafast demagnetization but rather hot electrons, which are generated by the laser pulse," explains Andrea Eschenlohr. Excited electrons are able to rapidly move across short distances - like the ultra-thin gold layer. In the process, they also deliver their magnetic moment (their "spin") to the ferromagnetic nickel layer, prompting the breakdown of the latter's magnetic order. "Actually, what we had hoped to see is how we might be able to influence the spin using the laser pulse," explains Dr. Christian Stamm, who heads the experiment. "The fact that we ended up being able to directly observe how these spins migrate was a complete surprise to everyone."
Laser pulses are thus one possibility to generate "spin currents" where the spin is transferred in place of an electric charge. This observation is relevant for spintronics research where scientists design new devices from magnetic layered systems, which perform calculations based on spins rather than electrons, enabling them to very quickly process and store information while at the same time saving energy.
Dr. Eschenlohr concluded her doctoral work at HZB, in the context of which she generated the results described above, in late 2012. As of January of this year, Dr. Eschenlohr is a scientific associate at University of Duisburg-Essen.
The paper "Ultrafast spin transport as key to femtosecond demagnetization" will be published on 27. January 2013, 18:00 London time (GMT), in Nature Materials with doi: 10.1038/nmat3546.
For additional information please contact Dr. Christian Stamm, Methods and Instrumentation for Synchrotron Radiation Research
Phone: +49 (0)30-8062-14887
Dr. Andrea Eschenlohr | Source: EurekAlert!
Further information: www.helmholtzberlin.de
More articles from Materials Sciences:
Printing Tiny Batteries
19.06.2013 | Wyss Institute for Biologically Inspired Engineering at Harvard
Printing artificial bone
18.06.2013 | Massachusetts Institute of Technology
- Biological fermentation process converts CO and CO2 into bioethanol and platform chemicals
- Process uses energy contained in steel plant off-gases
- Ten-year co-operation to develop and market integrated environmental solutions for the steel industry worldwide
Siemens Metals Technologies and LanzaTech have signed a ten-year co-operation agreement to develop and market integrated environmental solutions for the steel industry worldwide. The collaboration will utilize the ground-breaking fermentation technology developed by LanzaTech transforming carbon-rich off-gases generated by the steel industry into low carbon bioethanol and other platform chemicals. ...
Novel application of 3D printing could enable the development of miniaturized medical implants, compact electronics, tiny robots, and more
3D printing can now be used to print lithium-ion microbatteries the size of a grain of sand. The printed microbatteries could supply electricity to tiny devices in fields from medicine to communications, including many that have lingered on lab benches for lack of a battery small enough to fit the ...
... two engines aircraft project “Elektro E6”.
The countdown has been started for opening the gates again for the worldwide leading aviation and space event in Le Bourget, Paris from June 17th - 23rd, 2013.
EADCO & PC-Aero will present at the Paris Air Show in Hall H4 booth F-7 their new future aircraft and innovative project: ...
Siemens scientists have developed new kinds of ceramics in which they can embed transformers.
The new development allows power supply transformers to be reduced to one fifth of their current size so that the normally separate switched-mode power supply units of light-emitting diodes can be integrated into the module's heat sink.
The new technology was developed in cooperation with industrial and research partners who ...
Cheaper clean-energy technologies could be made possible thanks to a new discovery.
Led by Raymond Schaak, a professor of chemistry at Penn State University, research team members have found that an important chemical reaction that generates hydrogen from water is effectively triggered -- or catalyzed -- by a nanoparticle composed of nickel and phosphorus, two inexpensive elements that are abundant on Earth. ...
19.06.2013 | Life Sciences
19.06.2013 | Agricultural and Forestry Science
19.06.2013 | Studies and Analyses
14.06.2013 | Event News
13.06.2013 | Event News
10.06.2013 | Event News